journal article·2017-07

Development of flexible supercapacitors using an inexpensive graphene/PEDOT/MnO 2 sponge composite

Mahmoud Moussa, Ge Shi, Hao Wu, Zhiheng Zhao, Nicolas H. Voelcker, Dusan Losic, Jun Ma

Materials & Design· Volume 125
Publisher page

Abstract

Abstract It remains a formidable challenge to develop supercapacitors having both high stretchability and electrochemical performance. A ternary polymer composite was herein developed by engineering graphene platelets (GnPs), poly (3,4-ethylenedioxythiophene) (PEDOT) and manganese dioxide (MnO2) into a kitchen sponge. Cost-effective GnPs having an electrical conductivity of 1460 S cm− 1 were deposited onto the sponge pore surface by a simple dipping and drying process, followed by in situ polymerization of 3,4-ethylenedioxythiophene. MnO2 was then deposited onto the GnPs and PEDOT layers through soaking the GnP/PEDOT sponge into KMnO4 solution. When the composite was used as the electrodes for a flexible, stretchable supercapacitor, we obtained not only high specific capacitance but a high stretchability up to 400%. The supercapacitor demonstrated a specific capacitance of 802.99 F g− 1 and an energy density of 55.76 Wh kg− 1, with 99% capacitance retention over 1000 stretching cycles; these are attributed to the synergy between the composite components as well as the wavy device structure. The mass and thickness of the MnO2 layer was found to increase with the soak, leading to the enhancement of electrochemical performance of GnP/PEDOT/MnO2 sponge electrodes, i.e. 368.96 F g− 1 for 5 min and 740.25 F g− 1 for 10 min.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Supercapacitor Materials and Fabrication · Conducting polymers and applications · Advanced Sensor and Energy Harvesting Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. PEDOT-based composites as electrode materials for supercapacitors10.1088/0957-4484/27/4/042001 ↗
2. Facile preparation of high-strength polyaniline/polyvinyl chloride composite film as flexible free-standing electrode for supercapacitors10.1016/j.matdes.2016.07.017 ↗
3. Investigation of ionic liquid-doped ion conducting polymer electrolytes for carbon-based electric double layer capacitors (EDLCs)10.1016/j.matdes.2015.12.115 ↗
4. Nano-network MnO2/polyaniline composites with enhanced electrochemical properties for supercapacitors10.1016/j.matdes.2016.02.120 ↗
5. Carbon-based materials as supercapacitor electrodes10.1039/b813846j ↗
6. Cobalt-carbon derived from zeolitic imidazolate framework on Ni foam as high-performance supercapacitor electrode material10.1016/j.matdes.2015.06.077 ↗
7. Design of a layered nanoreactor to produce nitrogen doped carbon nanosheets as highly efficient material for supercapacitors10.1016/j.matdes.2015.10.015 ↗
8. High energy density supercapacitors using macroporous kitchen sponges10.1039/c2jm32030d ↗
9. Synthesis of MnS microfibers for high performance flexible supercapacitors10.1016/j.matdes.2016.07.038 ↗
10. Processable 3-nm thick graphene platelets of high electrical conductivity and their epoxy composites10.1088/0957-4484/25/12/125707 ↗
11. Electropolymerization of high stable poly(3,4-ethylenedioxythiophene) in ionic liquids and its potential applications in electrochemical capacitor10.1016/j.jpowsour.2008.01.024 ↗
12. Stretchable, porous, and conductive energy textiles10.1021/nl903949m ↗
13. Enhancing the supercapacitor performance of graphene/MnO2 nanostructured electrodes by conductive wrapping10.1021/nl2026635 ↗
14. Direct-growth of poly(3,4-ethylenedioxythiophene) nanowires/carbon cloth as hierarchical supercapacitor electrode in neutral aqueous solution10.1016/j.jpowsour.2013.05.153 ↗
15. Compressible, electrically conductive, fibre-like, three-dimensional PEDOT-based composite aerogels towards energy storage applications10.1016/j.compscitech.2016.02.023 ↗
16. Conducting-polymer-based supercapacitor devices and electrodes10.1016/j.jpowsour.2010.06.084 ↗
17. Hybrid nanostructured materials for high-performance electrochemical capacitors10.1016/j.nanoen.2012.10.006 ↗
18. Chemically integrated inorganic-graphene two-dimensional hybrid materials for flexible energy storage devices10.1002/smll.201602109 ↗
19. Solution-processed graphene/MnO2 nanostructured textiles for high-performance electrochemical capacitors10.1021/nl2013828 ↗
20. A facile approach to chemically modified graphene and its polymer nanocomposites10.1002/adfm.201103041 ↗
21. Redox exchange induced MnO2 nanoparticle enrichment in poly(3,4-ethylenedioxythiophene) nanowires for electrochemical energy storage10.1021/nn1010182 ↗
22. Layer-by-layer assembled hybrid multilayer thin film electrodes based on transparent cellulose nanofibers paper for flexible supercapacitors applications10.1016/j.jpowsour.2013.09.130 ↗
23. Carbon fabric-aligned carbon nanotube/MnO2/conducting polymers ternary composite electrodes with high utilization and mass loading of MnO2 for super-capacitors10.1016/j.jpowsour.2012.07.073 ↗
24. Novel organic-inorganic poly (3,4-ethylenedioxythiophene) based nanohybrid materials for rechargeable lithium batteries and supercapacitors10.1016/j.jpowsour.2006.04.033 ↗
25. A novel and facile one-pot solvothermal synthesis of PEDOT PSS/Ni Mn-Co-O hybrid as an advanced supercapacitor electrode material10.1021/acsami.5b11022 ↗
26. Ultrasonication assisted preparation of carbonaceous nanoparticles modified polyurethane foam with good conductivity and high oil absorption properties
27. Facile fabrication of graphene membranes with readily tunable structures10.1021/am5091287 ↗
28. Covalently bonded interfaces for polymer/graphene composites10.1039/c3ta01277h ↗
29. Stacking nature of graphene layers in carbon nanotubes and nanofibres10.1016/S0022-3697(97)00055-3 ↗
30. Electrochemical properties of high-power supercapacitors using single-walled carbon nanotube electrodes10.1002/1616-3028(200110)11:5<387::AID-ADFM387>3.0.CO;2-G ↗
31. Preparation of PEDOT/GO, PEDOT/MnO2, and PEDOT/GO/MnO2 nanocomposites and their application in catalytic degradation of methylene blue10.1186/s11671-015-0859-6 ↗
32. Fabrication of spirocyclic phosphazene epoxy-based nanocomposites with graphene via exfoliation of graphite platelets and thermal curing for enhancement of mechanical and conductive properties10.1021/ie400483x ↗
33. Convenient construction of poly(3,4-ethylenedioxythiophene)-graphene pie-like structure with enhanced thermoelectric performance10.1039/c3ta12691a ↗
34. Design and influence of mass ratio on supercapacitive properties of ternary electrode material reduced graphene oxide@MnO2@poly(3,4-ethylenedioxythiophene)-poly(styrene sulfonate)10.1016/j.electacta.2015.04.078 ↗
35. Design and synthesis of hierarchical MnO2 nanospheres/carbon nanotubes/conducting polymer ternary composite for high performance electrochemical electrodes10.1021/nl101723g ↗
36. Electrochemical behaviour of graphene-poly (3,4-ethylenedioxythiophene) (PEDOT) composite electrodes for supercapacitor applications10.1007/s12034-013-0610-9 ↗
37. Preparation of supercapacitors on flexible substrates with electrodeposited PEDOT/graphene composites10.1021/acsami.5b05937 ↗
38. Conducting polymer based manganese dioxide nanocomposite as supercapacitor10.1016/j.electacta.2013.07.013 ↗
39. Enhanced electrochemical performance of highly porous supercapacitor electrodes based on solution processed polyaniline thin films10.1021/am402702y ↗
40. High-performance supercapacitor electrode based on a polyaniline nanofibers/3D graphene framework as an efficient charge transporter10.1039/C3TA14959E ↗
41. MnO2-based nanostructures for high-performance supercapacitors10.1039/C5TA05523G ↗
42. High-performance supercapacitors using graphene/polyaniline composites deposited on kitchen sponge10.1088/0957-4484/26/7/075702 ↗
43. Avoiding resistance limitations in high-performance transparent supercapacitor electrodes based on large-area, high-conductivity PEDOT:PSS films10.1021/acsami.5b03882 ↗
44. All-textile flexible supercapacitors using electrospun poly(3,4-ethylenedioxythiophene) nanofibers10.1016/j.jpowsour.2010.07.007 ↗
45. Assembly of NiO/Ni(OH)(2)/PEDOT nanocomposites on contra wires for fiber-shaped flexible asymmetric supercapacitors10.1021/acsami.5b09526 ↗
46. Study on RuO2/CMK-3/CNTs composites for high power and high energy density supercapacitor10.1016/j.apenergy.2015.04.050 ↗
47. Effect of inorganic nanoparticles on mechanical property, fracture toughness and toughening mechanism of two epoxy systems10.1016/j.polymer.2008.05.043 ↗
48. Structure–property relations of 55nm particle-toughened epoxy10.1016/j.polymer.2010.08.038 ↗
49. From carbon nanotubes and silicate layers to graphene platelets for polymer nanocomposites
50. Interface-tuned epoxy/clay nanocomposites10.1016/j.polymer.2010.12.007 ↗
51. Study of epoxy toughened by in situ formed rubber nanoparticles10.1002/app.27882 ↗
52. Development of SENB toughness measurement for thermoset resins10.1016/j.polymertesting.2006.12.011 ↗
53. Development of a novel toughener for epoxy resins10.1002/pi.2604 ↗
54. A reactive polymer for toughening epoxy resin10.1002/app.31001 ↗
55. Fabrication, structure and properties of epoxy/metal nanocomposites10.1002/mame.201000409 ↗