journal article·2019-04Open access

Enhanced wear resistance of engineered glass-ceramic by nanostructured self-lubrication

V. Fuertes, M.J. Cabrera, J. Seores, D. Muñoz, J.F. Fernández, E. Enríquez

Materials & Design· Volume 168

Abstract

A new kind of micro-nanostructured glass-ceramic based on albite and anorthite crystallizations, >90%, has been obtained following a fast sintering processing route. Flexural strength values up to 111 MPa and microhardness values of 9.5 GPa are measured, supposing an improvement of ~60% regarding current glazes for ceramic floor tiles for high transit areas. The hierarchical micro-nanostructuration of these glass-ceramics favour crack deflection, which implies a reduction of brittleness in these materials and a consequent increase of fracture toughness of ~40% regarding a standard glass-ceramic. Tribological properties are also evaluated, showing a decrease in the friction coefficient (μ) of ~36% and a surprising reduction of the wear rate (WR) larger than one magnitude order, in both micro-nanostructured glass-ceramics, concerning a standard one. Worn tracks analysed by Multi-Mode Optical Profilometry and FE-SEM measurements revealed that nanocrystals present in the microstructure work as solid lubricants, favouring body sliding over their surface and noticeably reducing μ, WR and the surface damage suffered. Wear mechanism undergone by both glass-ceramics is unlike other glass-ceramics, similar to a polishing process, without any apparent material spalling. All of these findings make the micro-nanostructured materials very promising candidates to be used in high-performance self-lubricating applications.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Dental materials and restorations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. Glass-ceramic glazes for ceramic tiles: a review10.1007/s10853-011-5981-y ↗
2. A bright future for glass-ceramics
3. Bach · 2005
4. Hölland · 2012
5. Oxyfluoride silicate glasses and glass-ceramics doped with erbium and ytterbium - an examination of luminescence properties and up-conversion phenomena10.1016/j.matdes.2017.04.046 ↗
6. Synthesis and characterization of coprecipitation-derived ferrimagnetic glass-ceramic10.1007/s10853-005-2636-x ↗
7. Glass-ceramics: their production from wastes-a review10.1007/s10853-006-6554-3 ↗
8. Hierarchical micro-nanostructured albite-based glass-ceramic for high dielectric strength insulators10.1016/j.jeurceramsoc.2018.02.009 ↗
9. Functional properties of glass-ceramics for building application
10. Crystalline phase characterization of glass-ceramic glazes10.1016/j.ceramint.2005.10.002 ↗
11. Sintering and crystallisation of CaO-Al2O3-SiO2 glass powder compacts
12. Glass-ceramic glazes for future generation floor tiles10.1016/j.jeurceramsoc.2012.11.008 ↗
13. Preparation and properties of sintered glass-ceramics containing Au-Cu tailing waste10.1016/j.matdes.2015.07.173 ↗
14. Wear-resistant engineering ceramics10.1016/S0043-1648(01)00820-1 ↗
15. Wear-resistant metallic and elastomeric materials in the mining and mineral processing industries—an overview10.1016/S0043-1648(01)00622-6 ↗
16. Role of composition and microstructure in the abrasive wear of high-alumina ceramics10.1016/S0043-1648(99)00036-8 ↗
17. Effect of porosity on the erosive wear of liquid-phase-sintered alumina ceramics10.1111/j.1151-2916.1999.tb02054.x ↗
18. Nanostructured ceramics: a review of their potential10.1002/aoc.153 ↗
19. Effect of nanoparticles on wear resistance and surface hardness of a dental glass-ionomer cement10.1177/0021998309345341 ↗
20. Improvement of scratch and wear resistance of polymers by fillers including nanofillers10.3390/nano7030066 ↗
21. Journal · 2018 · 13 · 4053
22. 2D nanomaterials as lubricant additive: a review10.1016/j.matdes.2017.09.029 ↗
23. The effect of microstructural features on the mechanical properties of LZSA glass-ceramic matrix composites10.1590/S0366-69132013000300002 ↗
24. Sintering behaviour of nanostructured glass-ceramic glazes10.1016/j.ceramint.2010.03.029 ↗
25. Sintering and crystallization behaviour of nanostructured glass-ceramic glazes derived from industrial solid wastes
26. Nanocyrstalline materials10.1016/0079-6425(89)90001-7 ↗
27. Lubrication using a microstructurally engineered oxide: performance and mechanisms10.1023/A:1019187202237 ↗
28. Frits within a CaO-MgO-Al2O3-SiO2 system for glass-ceramic glazes: a comparison of laboratory and industrial applications
29. New strategy to mitigate urban heat island effect: energy saving by combining high albedo and low thermal diffusivity in glass ceramic materials10.1016/j.solener.2017.04.011 ↗
30. Structural insights of hierarchically engineered feldspars by confocal Raman microscopy
31. Chemical analysis with high spatial resolution by Rutherford backscattering and Raman confocal spectroscopies: surface hierarchically structured glasses10.1111/jace.12397 ↗
32. Effect of fugitive phase addition on porosity evolution and properties of stoneware tiles10.1179/174367509X12503626841514 ↗
33. A fracture mechanics analysis of indentation-induced Palmqvist crack in ceramics10.1007/BF00725625 ↗
34. Tribological performance under dry sliding conditions of graphene/silicon carbide composites10.1016/j.jeurceramsoc.2015.09.040 ↗
35. Fretting wear of ceramics10.1016/0301-679X(89)90169-2 ↗
36. ASTM G133-95 · 2002
37. Differences in densification behaviour of K- and Na-feldspar-containing porcelain bodies10.1016/S0040-6031(03)00257-0 ↗
38. Development of a glass-ceramic glaze formulated from industrial residues to improve the mechanical properties of the porcelain stoneware tiles10.1016/j.matlet.2018.03.023 ↗
39. Effect of glazing on flexural strength of full-contour zirconia10.1155/2018/8793481 ↗
40. Floor tile glass-ceramic glaze for improvement of glaze surface properties10.1016/j.jeurceramsoc.2005.12.016 ↗
41. Synthesis of glass-ceramic glazes in the ZnO-Al2O3-SiO2-ZrO2 system10.1016/j.jeurceramsoc.2006.08.009 ↗
42. Indentation size effect in nanohardness10.1016/j.actamat.2011.08.027 ↗
43. An explanation of the indentation size effect in ceramics10.1080/09500838908206356 ↗
44. Indentation size effects of ferritic/martensitic steels: a comparative experimental and modelling study10.1016/j.matdes.2018.02.064 ↗
45. Wachtman · 2009
46. Mechanical properties of porcelain stoneware tiles: the effect of glass-ceramic systems
47. Technological properties of glass-ceramic tiles obtained using rice husk ash as silica precursor10.1016/j.ceramint.2012.12.050 ↗
48. The influence of the composition on (the load-dependence of) the microhardness of Y-Si-Al-O-N glasses as measured by Vickers indentation10.1023/B:JMSC.0000017777.05637.a6 ↗
49. General relationship between strength and hardness10.1016/j.msea.2011.08.061 ↗
50. Strength, fracture toughness and microstructure of a selection of all-ceramic materials. Part II. Zirconia-based dental ceramics10.1016/j.dental.2003.05.002 ↗
51. Microstructural study of dielectric breakdown in glass-ceramics insulators10.1016/j.jeurceramsoc.2018.08.044 ↗
52. Sintering and mechanical properties of porcelains prepared from algerian raw materials10.1590/S0366-69132011000400013 ↗
53. Influence of porosity on the mechanical resistance of hydroxyapatite ceramics under compressive stress10.1016/0142-9612(95)98272-G ↗
54. Determination of the wear resistance of traditional ceramic tile glazes using a pin-on-disk tribometer10.1504/IJSURFSE.2011.044277 ↗
55. Properties related phase evolution in porcelain ceramics10.1016/j.jeurceramsoc.2007.02.096 ↗
56. Grain boundary design of thin films: using tilted brittle interfaces for multiple crack deflection toughening10.1016/j.actamat.2016.09.027 ↗
57. Toughness enhancement of nanostructured hard coatings: design strategies and toughness measurement techniques10.1016/j.surfcoat.2014.08.018 ↗
58. A review of the influence of environmental humidity and water on friction, lubrication and wear10.1016/0301-679X(90)90053-R ↗
59. Surface morphology in engineering applications: influence of roughness on sliding and wear in dry fretting10.1016/j.triboint.2011.04.020 ↗
60. Influence of nano-particle on the wear behaviour of thin film coatings:a review
61. High wear resistance white ceramic glaze containing needle like zircon single crystals by the addition of sepiolite n-ZrO210.1016/j.jeurceramsoc.2013.05.033 ↗
62. Tribological behavior of whiteware with different transparent glazes10.4191/kcers.2015.52.3.186 ↗
63. Wear and wear transition mechanisms of ceramics10.1016/0043-1648(95)06800-7 ↗