journal article·2025-12Open access

Humidity-responsive jetting for flowability assessment of fine powders

Kazuya U. Kobayashi, Komei Jinbo, Masakazu Muto, Rei Kurita

Materials & Design· Volume 260

Abstract

The control of powder flowability under humid environments is crucial for the design and reliability of material processing operations, especially in applications involving fine powder materials such as pharmaceuticals, battery slurries, and functional powders. However, humidity-induced cohesion often degrades flowability in a complex and history-dependent manner, making in situ assessment a critical challenge. Here, we present a simple and sensitive method for evaluating flowability based on impulsive jet ejection. Upon applying a short-duration impact to a pre-formed concave powder surface, a vertical jet emerges whose height and dynamics correlate strongly with cohesion changes under varying humidity. The method requires only a few grams of sample, offers high reproducibility, and captures subtle changes in interparticle adhesion that conventional techniques fail to resolve. We demonstrate that jet height and velocity reflect the mechanical response of powder assemblies and are governed by classical impact dynamics modulated by cohesion. The method enables real-time and quantitative assessment of powder flowability with high precision, even in small-volume systems. This approach provides not only a practical tool for quality control but also offers a promising direction for developing design-oriented techniques to optimize process conditions involving humidity-sensitive powders. • A jet-based method was developed and validated for assessing powder flowability using model glass beads. • Jet velocity and maximum height were identified as sensitive, quantitative flowability metrics. • The method requires only 12-mL of material and allows direct, in-situ evaluation of cohesiveness. • Applicability to other cohesive powders is expected but remains to be systematically verified. • Flowability indices showed clear humidity dependence; further studies will test broader particle types and environmental conditions.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Fluid Dynamics and Heat Transfer · Particle Dynamics in Fluid Flows · Electrohydrodynamics and Fluid Dynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Barbosa-Ccnovas · 2005 · vol. 86
2. Bhandari · 2023
3. Powder technology and pharmaceutical development: particle size and particle adhesion10.14356/kona.2013014 ↗
4. Granulation techniques and technologies: recent progresses10.15171/bi.2015.04 ↗
5. Recent advances in processing food powders by using superfine grinding techniques: a review, compr10.1111/1541-4337.12580 ↗
6. Critical review on the role of excipient properties in pharmaceutical powder-to-tablet continuous manufacturing, expert Opin
7. Brown · 1970 · vol. 10
8. Physics of the granular state10.1126/science.255.5051.1523 ↗
9. 1998
10. Granular material flows–an overview10.1016/j.powtec.2005.12.008 ↗
11. Bridging the rheology of granular flows in three regimes10.1103/PhysRevE.85.021305 ↗
12. Granular materials flow like complex fluids10.1038/nature24062 ↗
13. Key connection between gravitational instability in physical gels and granular media, Sci
14. Gel-like mechanisms of durability and deformability in wet granular systems
15. Duran · 1999
16. Wet granular materials10.1080/00018730600626065 ↗
17. Flowability of moist pharmaceutical powders10.1016/j.powtec.2008.06.017 ↗
18. The importance of humidity control in powder rheometer studies10.1016/j.powtec.2023.118425 ↗
19. The effects of humidity and storage time on the behavior of maltodextrins for direct compression10.1016/0378-5173(94)00209-N ↗
20. Variations in the adhesion force between a drug and carrier particles as a result of changes in the relative humidity of the air10.1016/S0378-5173(97)04869-2 ↗
21. Towards the end of drying of granular materials: enhanced evaporation and drying-induced collapse, water resour
22. Analysis of the dynamics of the FT4 powder rheometer10.1016/j.powtec.2015.04.039 ↗
23. Scanning electron microscope observations of powder sticking on punches during a limited number (n<5) of compactions of acetylsalicylic acid10.1007/s11095-017-2186-3 ↗
24. Experimental humidity dependency of small particle adhesion on silica and titania10.1016/j.jcis.2006.09.017 ↗
25. A review on the angle of repose of granular materials10.1016/j.powtec.2018.02.003 ↗
26. An expression for the angle of repose of dry cohesive granular materials on Earth and in planetary environments10.1073/pnas.2107965118 ↗
27. Characterization of powder flowability using measurement of angle of repose10.1016/S1672-2515(07)60247-4 ↗
28. Shear flow of cohesive powders with contact crystallization: experiment, model and calibration10.1007/s10035-015-0555-3 ↗
29. Effects of shear cell size on flowability of powders measured using a ring shear tester10.1016/j.powtec.2021.11.015 ↗
30. Fluidization of nanopowders: a review10.1007/s11051-012-0737-4 ↗
31. Effect of process conditions on fluidization10.14356/kona.2016017 ↗
32. Measuring the flow properties of consolidated, conditioned and aerated powders—a comparative study using a powder rheometer and a rotational shear cell10.1016/j.powtec.2006.10.016 ↗
33. Characterization of flow properties of cohesive powders: a comparative study of traditional and new testing methods10.1016/j.powtec.2013.11.045 ↗
34. Characterization of powder flowability using FT4–powder rheometer
35. The generation and dynamics of a granular jet induced by a sudden acceleration
36. K.U. Kobayashi, Pradipto, Y. Tagawa, Granular focused jet, Manuscript submitted for publication (2025).
37. Fuji Manufacturing Co., Ltd, https://fujimfg.co.jp/kenmazai/abrasive-glassbeads/.
38. Gas–solid fluidization of cohesive powders10.1016/j.cherd.2018.03.034 ↗
39. Nanoadditives to mitigate jamming in cohesive granular media10.1016/j.powtec.2025.120756 ↗
40. Transition behavior in silicone-coated sand mixtures
41. An experimental and numerical study of the angle of repose of coarse spheres10.1016/S0032-5910(01)00520-4 ↗
42. Katsuragi · 2016
43. de Gennes · 2004
44. Development of piezo-driven extensional rheometry with drop-on-demand head for dilute polymer solutions10.1063/5.0241363 ↗
45. Capillary bridges between two spherical bodies10.1021/la000657y ↗
46. Dynamics of wet granular matter10.1080/00018730500167855 ↗
47. The cohesive behavior of granular solids at high temperature in solar energy storage, energy convers