journal article·2020-03Open access

Additive manufacturing of graded B4C-Al cermets with complex shapes

Swetha Chandrasekaran, Ryan Lu, Richard Landingham, James T. Cahill, Luke Thornley, Wyatt Du Frane, Marcus A. Worsley, Joshua D. Kuntz

Materials & Design· Volume 188

Abstract

Fabrication of boron carbide (B4C) parts through direct ink writing at room temperature has been demonstrated. The 3D printed B4C parts were made from aqueous, thixotropic ink consisting of B4C particles with a solid loading ranging from 50.0 to 59.3 vol%. The porous B4C parts were infiltrated with molten aluminum (Al) to form a dense B4C-Al cermet. Simple cubic samples with varied spacing between B4C filaments were printed to tailor the density profile within the part. The Rockwell hardness of such parts ranges from 20 to 90 Ra (60 kg) depending on the overall density of the B4C structure. Parts were printed with variable spacings between filaments to systematically determine the upper limit for Al infiltration (800 μm). Elemental analysis revealed a homogenous infiltration both between and within the filaments of 3D printed B4C.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Aluminum Alloys Composites Properties · Bone Tissue Engineering Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Boron carbide—a comprehensive review10.1016/0955-2219(90)90048-K ↗
2. Processing and strengthening mechanisms of boron-carbide-reinforced aluminum matrix composites10.1016/j.mprp.2017.06.072 ↗
3. D. C. Halverson, A. J. Pyzik, I. A. Aksay, and F. D. Gac (eds.), Processing and microstructural characterization of B4C-Al Cermets, Proceedings of the 9th Annual Conference on Composites and Advanced Ceramic Materials: A Collection of Papers Presented at the 9th Annual Conference on Composites and Advanced Ceramic Materials, American Ceramic Society, Columbus, Ohio, 1985, pp. 736–744. doi.org/https://doi.org/10.1002/9780470320280.ch27.10.1002/9780470320280.ch27 ↗
4. Boron carbide reinforced aluminium matrix composite: physical, mechanical characterization and mathematical modelling10.1016/j.msea.2016.01.114 ↗
5. Advances in manufacturing boron carbide-aluminum composites10.1111/j.1551-2916.2004.00047.x ↗
6. Enhancement of wear and ballistic resistance of armour grade AA7075 aluminium alloy using friction stir processing10.1016/j.dt.2014.08.003 ↗
7. Functionally graded boron carbide
8. Continuous functionally graded boron carbide-aluminum nanocomposites by spark plasma sintering10.1016/j.msea.2007.05.124 ↗
9. Characterization of aluminium matrix composites (AA6061/B4C) fabricated by stir casting technique
10. B4C-Al composites fabricated by the powder metallurgy process10.3390/app7101009 ↗
11. Fused filament fabrication of small ceramic components10.3390/ma11081463 ↗
12. Ceramic stereolithography: additive manufacturing for ceramics by photopolymerization10.1146/annurev-matsci-070115-031841 ↗
13. Fabrication of complex-shaped zirconia ceramic parts via a DLP-stereolithography-based 3D printing method10.1016/j.ceramint.2017.11.135 ↗
14. 3D printing of ceramics: a review10.1016/j.jeurceramsoc.2018.11.013 ↗
15. Additive manufacturing of ceramics: issues, potentialities, and opportunities10.1111/jace.13700 ↗
16. Additive manufacturing of ceramics: a review
17. Additive manufacturing techniques for fabricating complex ceramic components from preceramic polymers
18. New possibilities using additive manufacturing with materials that are difficult to process and with complex structures10.1088/1402-4896/aa694e ↗
19. Complex shaped boron carbides from negative additive manufacturing10.1016/j.matdes.2018.03.026 ↗
20. Direct ink writing of 3D functional materials10.1002/adfm.200600434 ↗
21. Direct ink writing of a preceramic polymer and fillers to produce hardystonite (Ca2ZnSi2O7) bioceramic scaffolds10.1111/jace.14213 ↗
22. 3D-printed transparent glass10.1002/adma.201701181 ↗
23. Direct ink writing of silicon carbide for microwave optics10.1002/adem.201500298 ↗
24. Additive manufacturing of boron carbide via continuous filament direct ink writing of aqueous ceramic suspensions10.1016/j.jeurceramsoc.2016.06.002 ↗
25. Stabilization of highly-loaded boron carbide aqueous suspensions10.1016/j.ceramint.2017.03.111 ↗
26. Colloidal inks for directed assembly of 3-D periodic structures10.1021/la0257135 ↗
27. Using B4C nanoparticles to enhance thermal and mechanical response of aluminum10.3390/ma10060621 ↗