Compressive strength of twinned Ni-Co nanoparticles: In-situ experiments and atomistic simulations
Source abstract
Abstract
Nanoparticles obtained by solid-state dewetting are known to exhibit an extraordinarily high mechanical strength under uniaxial compression. While most of such particles are single-crystalline, some may contain a coherent twin boundary (CTB) parallel to the substrate. The role of the CTB in the mechanical properties of such particles remained unknown. This work combines nano-mechanical testing, advanced characterization methods, and atomistic computer simulations to investigate the CTB effect of the mechanical behavior of Ni-Co nanoparticles produced by solid-state dewetting on a sapphire substrate. The results indicate that the CTB does not make any significant impact on the particle strength, toughness, solute softening, or strain hardening. These properties remain virtually the same as those of single-crystalline particles of the same alloy. The mechanisms of dislocation nucleation and the dislocation-CTB interactions are investigated in detail. The work lends additional confidence to the previous results for the mechanical behavior of nanoparticles produced by solid-state dewetting, some of which could have contained twin boundaries. • Alloy nanoparticles produced by solid-state dewetting exhibit ultra-high strength. • Such particles may contain coherent twin boundaries parallel to the substrate. • The twin boundaries have little impact on the particle strength or toughness. • The particle strength is controlled by dislocation nucleation near particle surface. • Dislocations interact with twin boundaries but usually transmit to the opposite grain.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and mechanical properties · nanoparticles nucleation surface interactions · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Nickel nanoparticles set a new record of strength10.1038/s41467-018-06575-6 ↗
2. Size effect in compression of single-crystal gold microparticles10.1016/j.actamat.2011.04.057 ↗
3. Size and shape effects on the strength of platinum nanoparticles10.1007/s10853-021-06435-7 ↗
4. Giant shape- and size-dependent compressive strength of molybdenum nano- and microparticles10.1016/j.actamat.2020.07.054 ↗
5. Compression of freestanding gold nanostructures: from stochastic yield to predictable flow10.1088/0957-4484/21/5/055701 ↗
6. The theoretical strength of solids10.1007/BF02403513 ↗
7. Rapid fabrication and interface structure of highly faceted epitaxial Ni-Au solid solution nanoparticles on sapphire10.1016/j.actamat.2021.117318 ↗
8. Pseudoelasticity of metal nanoparticles is caused by their ultrahigh strength10.1002/adfm.201807554 ↗
9. Nanoscale gold pillars strengthened through dislocation starvation10.1103/PhysRevB.73.245410 ↗
10. Compressive strengths of molybdenum alloy micro-pillars prepared using a new technique10.1016/j.scriptamat.2007.05.010 ↗
11. Dislocation surface nucleation in surfactant-passivated metallic nanocubes10.1557/mrc.2019.84 ↗
12. Measuring surface dislocation nucleation in defect-scarce nanostructures10.1038/nmat4288 ↗
13. The impact of alloying on defect-free nanoparticles exhibiting softer but tougher behavior10.1038/s41467-021-22707-x ↗
14. Plasticity in small-sized metallic systems: intrinsic versus extrinsic size effect10.1016/j.pmatsci.2011.01.005 ↗
15. What is behind the inverse Hall–Petchs effect in nanocrystalline materials?10.1016/j.actamat.2007.02.021 ↗
16. When more is less: plastic weakening of single crystalline Ag nanoparticles by the polycrystalline Au shell10.1021/acsnano.1c02976 ↗
17. Strengthening materials by engineering coherent internal boundaries at the nanoscale10.1126/science.1159610 ↗
18. Internal and external stresses: in situ TEM compression of Cu bicrystals containing a twin boundary10.1016/j.scriptamat.2014.12.023 ↗
19. Dislocation slip transmission through a coherent Σ3(111) copper twin boundary: strain rate sensitivity, activation volume and strength distribution function10.1016/j.actamat.2018.09.045 ↗
20. Differences in deformation behavior of bicrystalline Cu micropillars containing a twin boundary or a large-angle grain boundary10.1016/j.actamat.2014.04.022 ↗
21. An insight into the role of the grain boundary in plastic deformation by means of a bicrystalline pillar compression test and atomistic simulation10.1016/j.actamat.2013.08.056 ↗
22. Atomic mechanism for dislocation emission from nanosized grain boundaries10.1103/PhysRevB.66.024101 ↗
23. An atomistic investigation of elastic and plastic properties of Au nanowires10.1007/s11837-005-0118-x ↗
24. Existence of two twinning-mediated plastic deformation modes in Au nanowhiskers10.1016/j.actamat.2012.03.018 ↗
25. Surface dislocation nucleation controlled deformation of Au nanowires10.1063/1.4902313 ↗
26. Atomistic simulation of the deformation of gold nanopillars10.1016/j.actamat.2006.10.058 ↗
27. Multi-wavelength Bragg coherent X-ray diffraction imaging of Au particles10.1107/S1600576719017163 ↗
28. Chemically-induced solid-state dewetting of thin Au films10.1016/j.actamat.2017.02.054 ↗
29. Fast parallel algorithms for short-range molecular-dynamics10.1006/jcph.1995.1039 ↗
30. Visualization and analysis of atomistic simulation data with OVITO – the open visualization tool10.1088/0965-0393/18/1/015012 ↗
31. Interatomic potential for the ternary Ni–Al–Co system and application to atomistic modeling of the B2–L10 martensitic transformation10.1088/0965-0393/23/6/065006 ↗
32. Grain boundary grooving in thin films revisited: the role of interface diffusion10.1016/j.actamat.2014.02.008 ↗
33. Faceting of twin grain boundaries in high-purity copper subjected to high pressure torsion10.1002/adem.201900589 ↗
34. Thermal stability of highly nanotwinned copper: the role of grain boundaries and texture10.1557/jmr.2012.376 ↗
35. Topological view of the thermal stability of nanotwinned copper10.1063/1.4772589 ↗
36. The inclination dependence of gold tracer diffusion along a Σ3 twin grain boundary in copper10.1016/S1359-6454(98)00429-7 ↗
37. The influence of grain boundary inclination on the structure and energy of Σ=3 grain boundaries in copper10.1080/01418619208248003 ↗
38. Anisotropic hole growth during solid-state dewetting of single-crystal Au-Fe thin films10.1016/j.actamat.2012.02.009 ↗
39. Quantitative insights into the dislocation source behavior of twin boundaries suggest a new dislocation source mechanism10.1557/s43578-021-00253-y ↗
40. Structural evolutions of metallic materials processed by severe plastic deformation10.1016/j.mser.2018.06.001 ↗
41. Formation of dislocation networks in a coherent Cu Σ3(111) twin boundary10.1016/j.scriptamat.2015.02.016 ↗
42. Kinetic and thermodynamic modified Wulff constructions for twinned nanoparticles10.1021/jp401566m ↗
43. Ultimate compressive strength and severe plastic deformation of equilibrated single-crystalline copper nanoparticles10.1016/j.actamat.2024.120101 ↗
44. Nanosculpt: a methodology for generating complex realistic configurations for atomistic simulations10.1016/j.mex.2016.03.002 ↗