Open-cell aluminium foams with graded coatings as passively controllable energy absorbers
Source abstract
Abstract
Compared to most bulk materials, open-cell aluminium (Al) foams (OCAFs) are light-weight and can absorb a significant amount of energy in compression, e.g. during impact. When coated with nickel (Ni), OCAFs can absorb even more energy, making them more appropriate for impacts at higher velocities than uncoated OCAFs. When Ni-coated OCAFs experience low-velocity impact however, the stopping distance during the impact is small compared to that of uncoated OCAFs and hence, deceleration occurs fast. This exposes devices (and possibly human beings) protected by OCAFs to large internal forces leading to internal damage. An OCAF that combines the properties of uncoated and coated OCAFs can absorb energy during both low-velocity and high-velocity impact scenarios. This contribution introduces two of such OCAFs which are created by partially and gradually coating OCAFs. The general mechanics of the two OCAFs are revealed using experimental and numerical observation methods.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Cellular and Composite Structures · Automotive and Human Injury Biomechanics · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Preferential oxidation of carbon monoxide with iron-promoted platinum catalysts supported on metal foams10.1016/j.apcata.2005.11.030 ↗
2. Nanostructured palladium-silver coated nickel foam cathode for magnesium-hydrogen peroxide fuel cells10.1016/j.electacta.2006.03.066 ↗
3. Porous niti for bone implants: A review10.1016/j.actbio.2008.02.009 ↗
4. Heat transfer in open-cell metal foams10.1016/S1359-6454(98)00031-7 ↗
5. Sound absorption of cellular metals with semiopen cells10.1121/1.1286812 ↗
6. Deformation of open-cell aluminum foam10.1016/S1359-6454(01)00294-4 ↗
7. Multifunctionality of cellular metal systems10.1016/S0079-6425(98)00004-8 ↗
8. Cellular metals10.1016/S1359-0286(98)80105-8 ↗
9. Studies on the dynamic compressive properties of open-cell aluminum alloy foams10.1016/j.scriptamat.2005.09.008 ↗
10. Strain rate effects on the compressive property and the energy-absorbing capacity of aluminum alloy foams10.1016/S1044-5803(02)00194-8 ↗
11. New hybrid foam materials for impact protection10.1016/j.ijimpeng.2013.09.002 ↗
12. Electrodeposition of Nanocrystalline Metals on Open Cell Metal Foams: Improved Mechanical Properties10.1149/1.3422510 ↗
13. Nanonickel coated aluminum foam for enhanced impact energy absorption10.1002/adem.201000190 ↗
14. Aluminium foams for lighter vehicles10.1504/IJVD.2005.006640 ↗
15. Hybrid metal foams: experimental observations and phenomenological modelling
16. Structure, metallurgy, and mechanical properties of a porous tantalum foam10.1002/1097-4636(2001)58:2<180::AID-JBM1005>3.0.CO;2-5 ↗
17. E. NCAP
18. C. of Automotive Safety of the University of Adelaide
19. Design of an aluminium-based vehicle platform for front impact safety10.1016/j.ijimpeng.2004.04.016 ↗
20. Hybrid Metal Foams: Mechanical Testing and Determination of Mass Flow Limitations During Electroplating
21. Mechanical properties of reticulated aluminum foams with electrodeposited Ni–W coatings10.1016/j.scriptamat.2008.03.035 ↗
22. Mechanical properties of hybrid nanocrystalline metal foams10.1016/j.actamat.2009.04.053 ↗
23. Compressive behavior of aluminum/copper hybrid foams under high strain rate loading10.1016/j.msea.2013.10.104 ↗
24. Modeling and simulation of the quasi-static compressive behavior of al/cu hybrid open-cell foams10.1016/j.ijsolstr.2014.10.030 ↗
25. Effect of annealing on the mechanical properties of nano-copper reinforced open-cell aluminum foams10.1016/j.msea.2014.06.108 ↗
26. Sutton · 2009