journal article·2026-01Open access

A multi-objective Bayesian optimization for non-isothermal composite molding: Enhancing cure uniformity across injection strategies

Longfei Cai, Xishuang Jing, Siyu Chen, Chengyang Zhang, Fubao Xie

Materials & Design· Volume 261

Abstract

Non-isothermal molding processes for composite materials have been extensively investigated to address the filling challenges inherent in resin transfer molding (RTM). However, the non-uniform cure degree and temperature distribution induced by non-isothermal injection remain persistent bottlenecks to achieving high-performance composites. In this study, a multi-objective Bayesian optimization framework, integrated with PyFluent-based finite element simulations, is developed to enhance the spatial uniformity of cure degree and temperature fields by optimizing injection strategies. Simulation results show that the framework accurately captures the coupled non-isothermal flow–cure behavior and ensures high optimization efficiency. More importantly, the optimized 1D flow strategy can be directly transferred to complex 3D geometries. In two representative 3D cases, the transferred strategy achieved substantial improvements in cure and temperature uniformity—with the reductions in cure degree standard deviation, extreme difference, and temperature standard deviation reaching up to 91.9%, 87.6%, and 90.4%, respectively—while markedly lowering optimization costs. Theoretical time savings increase substantially with model complexity, exceeding a fortyfold reduction in this study. This work provides a practical and cost-effective pathway for rapid optimization of non-isothermal composite molding processes.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Epoxy Resin Curing Processes · Injection Molding Process and Properties · Composite Material Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Implementing recyclable bio- and CO2-sourced synergetic dynamic matrices via precise control of curing and properties for natural fiber composites within industrially relevant resin transfer molding10.1016/j.cej.2025.161506 ↗
2. Fabrication and properties of CNTs/carbon fabric hybrid multiscale composites processed via resin transfer molding technique10.1016/j.compositesb.2012.10.022 ↗
3. Identification of the orthotropic diffusion properties of RTM textile composites for aircraft applications10.1016/j.compstruct.2015.10.039 ↗
4. An experimental investigation of class a surface finish of composites made by the resin transfer molding process10.1016/j.compscitech.2007.04.010 ↗
5. Manufacture of thin composite structures by the RTM process: numerical simulation of the shaping operation10.1016/0266-3538(96)00011-5 ↗
6. Injection simulations of thick composite parts manufactured by the RTM process10.1016/S0266-3538(00)00126-3 ↗
7. Multifunctional MXene/carbon nanotubes coated glass fiber sensors for in-situ monitoring of curing process and structural health of polymeric composites
8. Construction of epoxy composites with double alternating “rigid-flexible” structures: curing kinetics and thermal/mechanical properties10.1016/j.cej.2024.157547 ↗
9. Experimental characterization of voids in high fibre volume fraction composites processed by high injection pressure RTM10.1016/j.compositesa.2015.11.042 ↗
10. Study on high-speed RTM to reduce the impregnation time of carbon/epoxy composites10.1016/j.compstruct.2014.08.023 ↗
11. Coupled filling-curing simulation and optimized design of cure cycle in liquid composite molding10.1007/s00170-024-13519-6 ↗
12. Nonisothermal simulation on pressure during resin transfer molding10.1002/app.47492 ↗
13. 3D numerical simulation of filling and curing processes in non-isothermal RTM process cycle10.1016/j.finel.2011.02.007 ↗
14. Optimal Galerkin finite element methods for non-isothermal liquid composite moulding process simulations10.1016/j.ijheatmasstransfer.2013.04.013 ↗
15. Quantitative relations between curing processes and local properties within thick composites based on simulation and machine learning10.1016/j.matdes.2023.111686 ↗
16. Online learning based intelligent temperature control during polymer composites microwave curing process10.1016/j.cej.2019.03.204 ↗
17. A finite element model for the prediction of porosity in autoclave cured composites10.1016/j.compositesb.2023.110882 ↗
18. Computational modelling and analysis of transverse liquid composite moulding processes10.1016/j.compositesa.2023.107433 ↗
19. Study on phenomenological curing model of epoxy resin for prediction of degree of cure10.1007/s10973-011-2070-z ↗
20. Stochastic multi-objective optimisation of the cure process of thick laminates10.1016/j.compositesa.2018.06.015 ↗
21. Numerical optimisation of thermoset composites manufacturing processes: a review10.1016/j.compositesa.2019.105499 ↗
22. A hybrid PSO-GA algorithm for optimization of laminated composites10.1007/s00158-016-1631-y ↗
23. Multi-objective curing optimization of carbon fiber composite materials using data assimilation and localized heating10.1016/j.compositesa.2019.01.021 ↗
24. A novel post-forming method for fully cured thermosetting composite parts: prediction and investigation10.1002/pc.28631 ↗
25. Multi-objective approach to optimize cure process for thick composite based on multi-field coupled model with RBF surrogate model10.1016/j.coco.2021.100671 ↗
26. Prediction of mechanical properties of carbon fiber/epoxy composite modified by nanoparticles using multiple explainable machine learning algorithms10.1016/j.matdes.2025.114537 ↗
27. Addressing data scarcity in deep learning: Leveraging real and artificial datasets to predict compaction of composites10.1016/j.matdes.2025.114536 ↗
28. Physics-informed neural networks for data-free surrogate modelling and engineering optimization – an example from composite manufacturing10.1016/j.matdes.2023.112034 ↗
29. Volume of fluid (VOF) method for the dynamics of free boundaries10.1016/0021-9991(81)90145-5 ↗
30. A numerical approach to model non-isothermal viscous flow through fibrous media with free surfaces10.1002/fld.1650190704 ↗
31. Recent developments encompassing non-isothermal/isothermal liquid composite molding process modeling/analysis: physically accurate, computationally effective, and affordable simulations and validations10.1177/089270579801100602 ↗
32. Numerical analysis of cure temperature and internal stresses in thin and thick RTM parts10.1016/j.compositesa.2004.10.021 ↗
33. Development of a Helicopter Landing Gear Prototype using Resin infusion Molding
34. Mold filling and curing analysis in liquid composite molding10.1002/pc.750140111 ↗
35. ParEGO: a hybrid algorithm with on-line landscape approximation for expensive multiobjective optimization problems10.1109/TEVC.2005.851274 ↗
36. Gaussian process regression as a surrogate model for the computation of dispersion relations10.1016/j.cma.2023.116661 ↗
37. Bayesian optimization acquisition functions for accelerated search of cluster expansion convex hull of multi-component alloys10.1038/s41524-024-01391-7 ↗
38. Extension of Latin hypercube samples with correlated variables, Reliab. Eng. Syst. Saf. 93 (2008) 1047–1059. https://doi.org/10.1016/j.ress.2007.04.005.10.1016/j.ress.2007.04.005 ↗
39. Pareto front approximation through a multi-objective augmented Lagrangian method10.1016/j.ejco.2021.100008 ↗
40. Resin flow analysis for the foam core sandwich spoiler by vacuum-assisted resin injection process10.3390/ma15155279 ↗
41. Three-dimensional process cycle simulation of composite parts manufactured by resin transfer molding10.1016/j.compstruct.2003.12.001 ↗