Twinned dendrites growth in wire arc directed energy deposition of Al-Zn-Mg-Cu alloy
Source abstract
Abstract
Twinned dendrites have attracted worldwide attention in the past half century due to their unusual orientation and crystallographic symmetry. Successive research has established a basic understanding of them in relatively steady processes like direct chill casting and directional solidification. This work, for the first time, investigated the growth behaviors of twinned dendrites in the wire arc directed energy deposition. The crystallographic characteristics, formation, and evolution laws of the twinned dendrites in the unsteady localized solidification condition are explored via experiments and numerical simulations. Results show that stacking faults are vital in the longitudinal growth of twinned dendrites by adjusting intermittent twin boundaries. During deposition, Mg, Zn, and Cu, which have low stacking fault energy, can promote the growth of twinned dendrites. The molten pool tail has large temperature gradients, crystallization velocities, and sufficient convection, providing advantageous growth conditions for twinned dendrites. Competitive relationships form between twinned and regular dendrites at the molten pool center. However, the twinned dendrites also cooperate with regular dendrites in epitaxial growth via their 〈1 0 0〉 lateral branch. With the remelting depth increasing, the twinned dendrite morphology changes from lamellar to isolated unilateral feather shape, then to unchained islands, and finally disappear.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties · nanoparticles nucleation surface interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Some crystallographic observations of growth-twinned dendrites in aluminium10.1016/0022-0248(74)90113-4 ↗
2. 〈110〉 dendrite growth in aluminum feathery grains10.1007/s11661-998-0321-9 ↗
3. Influence of convection on feathery grain formation in aluminum alloys10.1007/s11661-006-0229-1 ↗
4. Morphology and growth kinetic advantage of quenched twinned dendrites in Al-Zn Alloys10.1007/s11661-012-1539-0 ↗
5. Twinned dendrite growth during Bridgman solidification10.1016/j.actamat.2015.07.008 ↗
6. Modelling the growth of feather crystals10.1016/S1359-6454(96)00204-2 ↗
7. Dendrite growth morphologies in aluminium alloys10.1016/S1359-6454(98)00308-5 ↗
8. Study of the twinned dendrite tip shape II: experimental assessment10.1016/j.actamat.2011.04.034 ↗
9. Study of the twinned dendrite tip shape I: phase-field modeling10.1016/j.actamat.2011.04.033 ↗
10. Dendritic Growth Morphologies in Al-Zn Alloys—Part I: X-ray Tomographic Microscopy10.1007/s11661-013-1912-7 ↗
11. Dendrite orientation transition in Al Ge alloys10.1016/j.actamat.2018.12.001 ↗
12. Controlling solid-liquid interfacial energy anisotropy through the isotropic liquid10.1038/s41467-020-14530-7 ↗
13. Influence of Cr on the nucleation of primary Al and formation of twinned dendrites in Al–Zn–Cr alloys: Can icosahedral solid clusters play a role?10.1016/j.actamat.2013.07.056 ↗
14. Influence of icosahedral short range order on diffusion in liquids: a study on Al-Zn-Cr alloys10.1016/j.actamat.2016.05.051 ↗
15. A three-dimensional wire-feeding model for heat and metal transfer, fluid flow, and bead shape in wire plasma arc additive manufacturing10.1016/j.jmapro.2022.09.012 ↗
16. Grain refinement and mechanical properties improvement of Inconel 625 alloy fabricated by ultrasonic-assisted wire and arc additive manufacturing10.1016/j.jallcom.2022.164957 ↗
17. Texture Analysis with MTEX – free and open source software toolbox10.4028/www.scientific.net/SSP.160.63 ↗
18. Multi-layer deposition mechanism in ultra high-frequency pulsed wire arc additive manufacturing (WAAM) of NiTi shape memory alloys
19. Forming characteristics and mechanism of variable polarity TIG-based wire arc additive manufacturing of Al–Mg-Zn-Cu alloy10.1007/s00170-022-10292-2 ↗
20. Effects of interlayer temperature on the microstructures of wire arc additive manufactured Al-Zn-Mg-Cu alloy: Insights into texture responses and dynamic precipitation behaviors
21. Sinusoidal oscillating laser welding of 7075 aluminum alloy: hydrodynamics, porosity formation and optimization10.1016/j.ijheatmasstransfer.2019.05.111 ↗
22. Regionalization of microstructure characteristics and mechanisms of slip transmission in oriented grains deposited by wire arc additive manufacturing10.1016/j.msea.2022.143529 ↗
23. Formation of twinned dendrites during unidirectional solidification of Al-32%Zn alloy10.1016/S1003-6326(18)64713-2 ↗
24. Microstructure and properties of twinned dendrites in directionally solidified A356 alloy10.1016/j.msea.2018.07.079 ↗
25. Wire arc additive manufacturing of Al-Zn-Mg-Cu alloy: Microstructures and mechanical properties
26. Phase-field simulations and microstructural analysis of epitaxial growth during rapid solidification of additively manufactured AlSi10Mg alloy10.1016/j.matdes.2020.108985 ↗
27. Effect of molten pool spatial arrangement on texture evolution in pulsed laser additive manufacturing of inconel 71810.3390/ma15093286 ↗
28. TEM investigations on twin boundary structures of feathery crystals in aluminum alloys during Bridgman solidification10.1016/j.jcrysgro.2018.04.018 ↗
29. Effect of process parameters on formability and surface quality of selective laser melted Al-Zn-Sc-Zr alloy from single track to block specimen10.1016/j.optlastec.2019.05.008 ↗
30. Microstructure and tensile property of a novel AlZnMgScZr alloy additively manufactured by gas atomization and laser powder bed fusion10.1016/j.scriptamat.2018.08.025 ↗
31. Niobium nanoparticle-enabled grain refinement of a crack-free high strength Al-Zn-Mg-Cu alloy manufactured by selective laser melting10.1016/j.jallcom.2021.163427 ↗
32. Wire arc additive manufacturing of titanium aluminide alloys using two-wire TOP-TIG welding: processing, microstructures, and mechanical properties
33. Influence of minor Sc additions on grain refinement and microstructure characteristics of a high Zn-containing Al-Zn-Mg-Cu-Zr alloy10.1007/s11771-022-4979-8 ↗