journal article·2017-01

Vickers microhardness and microstructure relationship of Ti-6Al-4V alloy under cyclic forward-reverse torsion and monotonic torsion loading

Xinkai Ma, Fuguo Li, Jun Cao, Jinghui Li, Han Chen, Chen Zhao

Materials & Design· Volume 114
Publisher page

Abstract

Abstract The effect of strain reversal on the hardening and grain refinement of Ti-6Al-4V alloy due to cyclic forward-reverse torsion (CFRT) has been investigated in this study by twisting the bars with different strain reversal amplitude. The results showed that microhardness and its distribution were very sensitive to CFRT and increased distinctly after pre-CFRT pure shear deformation. It was observed that the ultimate microhardness and homogeneity were superior for CFRT as compared to monotonic torsion (MT), while the hardenability exponent of MT is higher than CFRT. Besides microhardness in the center layer and surface layer of a bar exhibited different evolutionary process with the increasing amplitude of strain reversal. Grain refinement induced by latticed dislocation tangle and work hardening enhanced by strain gradient were also discussed to reveal the evolution of microstructure and microhardness.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Titanium Alloys Microstructure and Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. A study of the microstructure and hardness of two titanium alloys: commercially pure and Ti-6Al-4V10.1016/j.jallcom.2009.06.172 ↗
2. Extreme grain refinement by severe plastic deformation: a wealth of challenging science10.1016/j.actamat.2012.10.038 ↗
3. Mechanical properties of nanocrystalline materials10.1016/j.pmatsci.2005.08.003 ↗
4. Texture and microstructural evolution in pearlitic steel during triaxial compression10.1007/s11661-011-1043-y ↗
5. Microstructure development and hardening during high pressure torsion of commercially pure aluminium: strain reversal experiments and a dislocation based model10.1016/j.msea.2010.11.079 ↗
6. Description of severe plastic deformation (SPD)
7. Precipitation kinetics in a severely plastically deformed 7075 aluminium alloy10.1016/j.actamat.2013.11.071 ↗
8. Combined volumetric, energetic and microstructural defect analysis of ECAP-processed nickel10.1016/j.actamat.2015.10.004 ↗
9. Plastic flow, structure and mechanical properties in pure Al deformed by twist extrusion10.1016/j.msea.2009.06.005 ↗
10. Characteristic features of microstructure of ALMg5 deformed to large plastic strains10.1016/S0921-5093(00)01803-7 ↗
11. Ultra-fine grained bulk steel produced by accumulative roll-bonding (ARB) process10.1016/S1359-6462(99)00015-9 ↗
12. Influence of phase volume fractions on the processing of a Ti–6Al–4V alloy by high-pressure torsion10.1016/j.msea.2012.09.034 ↗
13. Using high-pressure torsion for metal processing: fundamentals and applications10.1016/j.pmatsci.2008.03.002 ↗
14. Characteristics of the allotropic phase transformation in titanium processed by high-pressure torsion using different rotation speeds10.1016/j.msea.2016.05.001 ↗
15. Twist channel angular pressing (TCAP) as a method for increasing the efficiency of SPD10.1016/j.msea.2010.06.057 ↗
16. Experimental study on pure copper subjected to different severe plastic deformation modes10.1016/j.msea.2016.01.018 ↗
17. Deformation homogeneity, mechanical behaviour and strain hardening characteristics of titanium severe plastically deformed by cyclic channel die compression method10.1016/j.matdes.2016.04.004 ↗
18. Producing high-Sstrength metals by I-ECAP10.1002/adem.201500363 ↗
19. The role of microstructure and texture in controlling mechanical properties of AZ31B magnesium alloy processed by I-ECAP10.1016/j.msea.2015.04.055 ↗
20. Mechanical properties and microstructure of AZ31B magnesium alloy processed by I-ECAP10.1007/s11661-013-2094-z ↗
21. Enhancing tensile strength of Cu by introducing gradient microstructures via a simple torsion deformation10.1016/j.matdes.2015.10.157 ↗
22. Strain path effects on microstructural evolution and mechanical behaviour of constrained groove pressed aluminium sheets10.1016/j.matdes.2015.09.057 ↗
23. On the interactions between strain path reversal and dynamic recrystallisation in 316L stainless steel studied by hottorsion10.1016/j.msea.2013.01.045 ↗
24. Effect of strain path on dynamic strain-induced transformation in a microalloyed steel10.1016/j.actamat.2013.11.062 ↗
25. The effect of strain path reversal on high-angle boundary formation by grain subdivision in a model austenitic steel10.1016/j.scriptamat.2010.10.004 ↗
26. Enhancing tensile strength of Cu by introducing gradient microstructures via a simple torsion deformation
27. The impact of strain reversal on microstructure evolution and orientation relationships in Ti-6Al-4V with an initial alpha colony microstructure10.1007/s11661-014-2590-9 ↗
28. Effect of strain reversal on the dynamic spheroidization of Ti-6Al-4V during hot deformation10.1007/s11661-004-0246-x ↗
29. Effect of strain-path reversal on microstructure evolution and cavitation during hot torsion testing of Ti-6Al-4V10.1007/s11661-007-9343-y ↗
30. Application of the digital material representation to strain localization prediction in the two phase titanium alloys for aerospace applications10.1016/j.acme.2015.10.003 ↗
31. Effect of realistic 3D microstructure in crystal plasticity finite element analysis of polycrystalline Ti-5Al-2.5 Sn10.1016/j.ijplas.2015.01.003 ↗
32. Metallic materials: tensile testing at ambient temperature
33. The limits of refinement by severe plastic deformation10.1002/adem.200600133 ↗
34. Hardening and softening mechanisms of pearlitic steel wire under torsion10.1016/j.matdes.2014.03.029 ↗
35. Evolution of microstructural parameters and flow stresses toward limits in nickel deformed to ultra-high strains10.1016/j.actamat.2008.07.040 ↗
36. Mechanism in the β phase evolution during hot deformation of Ti–5Al–2Sn–2Zr–4Mo–4Cr with a transformed microstructure10.1016/j.actamat.2015.04.045 ↗
37. Micro-structural evolution subjected to combined tension–torsion deformation for pure copper10.1016/j.msea.2014.04.083 ↗
38. Influence of pre-torsion deformation on microstructures and properties of cold drawing pearlitic steel wires10.1016/j.matdes.2013.02.047 ↗
39. Yu · 2012
40. Evolution of sub-micron grain size and weak texture in magnesium alloy Mg–3Al–0.4Mn by a modified multi-axial forging process10.1016/j.scriptamat.2011.10.008 ↗
41. Evolution of crystallographic texture and microstructure during cold rolling of twinning-induced plasticity (TWIP) steel: experiments and simulations10.1007/s11661-012-1346-7 ↗
42. Microhardness distribution and microstructural evolution in pure aluminum subjected to severe plastic deformation: elliptical cross-sectioned spiral equal-channel extrusion (ECSEE)10.1007/s11665-015-1731-7 ↗
43. Microstructure -texture-mechanical properties relationship in multi-pass warm rolled Ti-6Al-4V alloy
44. Microstructural mechanisms during hot working of commercial grade Ti–6Al–4V with lamellar starting structure10.1016/S0921-5093(01)01448-4 ↗
45. Effect of strain path in high-pressure torsion process on hardening in commercial purity titanium10.2320/matertrans.ME200714 ↗
46. Significance of strain reversals in a two-phase alloy processed by high-pressure torsion10.1016/j.msea.2010.07.090 ↗
47. Role of strain reversal in grain refinement by severe plastic deformation10.1016/j.msea.2008.09.036 ↗
48. Microstructural evolution and the mechanical properties of an aluminum alloy processed by high-pressure torsion10.1007/s10853-012-6524-x ↗
49. Evolution of microstructural homogeneity in copper processed by high-pressure torsion10.1016/j.scriptamat.2010.05.030 ↗
50. Microstructure evolution, hardening and thermal behavior of commercially pure copper subjected to torsion deformation10.1016/j.msea.2013.12.079 ↗
51. An improved strain gradient plasticity formulation with energetic interfaces: theory and a fully implicit finite element formulation10.1007/s00466-012-0743-5 ↗
52. Coupled nonlinear size-dependent behaviour of microbeams10.1007/s00339-013-7787-z ↗
53. The deformation of plastically non-homogenous crystals10.1080/14786437008238426 ↗
54. Postbuckling analysis of microscale beams based on a strain gradient finite element approach
55. Accounting for the recoverable plasticity and size effect in the cyclic torsion of thin metallic wires using strain gradient plasticity10.1016/j.msea.2015.08.063 ↗
56. The transformation hardening of steel surfaces by laser beams—I. Hypo-eutectoid steels10.1016/0001-6160(84)90175-5 ↗
57. Effect of heat treatment on microstructure and microhardness evolution in a Ti–6Al–4V alloy processed by high-pressure torsion10.1007/s10853-012-7071-1 ↗