Investigation of tensile deformation behavior of a TWIP/TRIP metastable β titanium alloy at typical temperature part Ⅰ: Room temperature
Source abstract
Abstract
• The tensile deformation mechanism of Ti-10Mo alloy at room temperature was revealed. • The microstructure evolution of Ti-10Mo alloy during tensile process at room temperature was clarified. • The work hardening behavior of Ti-10Mo alloy during tensile process at room temperature was recognized. • The high yield strength of Ti-10Mo alloy at room temperature may be due to quenching vacancies and athermal ω phase. The tensile behavior and deformation mechanism of Ti-10Mo alloy at room temperature (298 K) were investigated. The results show that the alloy has an ultimate tensile strength (UTS) of 744 MPa and a high yield strength (YS) of 662 MPa, as well as an excellent elongation (El) after fracture of 38 %, outperforming Ti-15Mo alloy under the same conditions. The superior strength and plasticity of Ti-10Mo alloy at 298 K are attributed to the activation of both {332}〈113> twinning and SIM α“ during deformation. The sequence of different deformation mechanisms is as follows: in the initial stage of deformation, dislocation slip can be extensively activated and continues to occur during subsequent deformation; in the middle stage of deformation, primary and secondary {332}〈113〉 twinning and SIM α” are activated simultaneously, resulting in a continuous increase in work hardening rate; in the later stage of deformation, the alloy can further deform through {1 1 1} α“ twinning. The higher YS may be due to the optimal quantity and size of athermal ω phase in Ti-10Mo alloy, which increases the YS without significantly affecting plasticity. Meanwhile, Quenching vacancies can also increase the YS of the alloy. The three stages of the work hardening rate curve correspond to the activation of the dislocation slip mechanism, the activation of the {332}〈113〉 twinning and SIM α” and the stop of the {332}〈113〉 twinning and SIM α“.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Advanced materials and composites · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Microstructural evolution of a ductile metastable β titanium alloy with combined TRIP/TWIP effects10.1016/j.jallcom.2016.12.394 ↗
2. Cryogenic tensile properties and deformation behavior of a superhigh strength metastable beta titanium alloy Ti–15Mo–2Al10.1016/j.msea.2021.141344 ↗
3. Deformation mechanism of the (β+α”) dual-phase Ti-42Zr-13Nb alloy exhibiting an abnormal work-hardening behavior10.1016/j.matchar.2023.113166 ↗
4. Deformation microstructure and mechanisms in a metastable β titanium alloy exhibiting TWIP and TRIP effects10.4028/www.scientific.net/MSF.783-786.1360 ↗
5. Investigation of early stage deformation mechanisms in a metastable β titanium alloy showing combined twinning-induced plasticity and transformation-induced plasticity effects10.1016/j.actamat.2013.07.019 ↗
6. Study on formation mechanism of {332}<113> deformation twinning in metastable β-type Ti alloy focusing on stress-induced α” martensite phase10.1016/j.scriptamat.2019.10.011 ↗
7. Dynamic response and adiabatic shear behavior of β-type Ti–Mo alloys with different deformation modes10.1016/j.msea.2022.144108 ↗
8. Texture and shape memory behavior of Ti–22Nb–6Ta alloy10.1016/j.actamat.2005.09.014 ↗
9. Prediction of the martensite start temperature for β titanium alloys as a function of composition10.1016/j.scriptamat.2008.12.034 ↗
10. Lütjering · 2007
11. Tuning the stress induced martensitic formation in titanium alloys by alloy design10.1007/s10853-012-6263-z ↗
12. Deformation-induced martensitic transformation in a new metastable β titanium alloy10.1016/j.jallcom.2015.07.263 ↗
13. On the design of new β-metastable titanium alloys with improved work hardening rate thanks to simultaneous TRIP and TWIP effects10.1016/j.scriptamat.2012.01.049 ↗
14. General approach to phase stability and elastic properties of β-type Ti-alloys using electronic parameters10.1016/j.scriptamat.2006.04.022 ↗
15. Mechanism of twinning-induced plasticity in β-type Ti–15Mo alloy10.1016/j.scriptamat.2013.05.027 ↗
16. A new multi-element beta titanium alloy with a high yield strength exhibiting transformation and twinning induced plasticity effects10.1016/j.scriptamat.2017.10.017 ↗
17. Enhancement of uniform elongation in high strength Ti–Mo based alloys by combination of deformation modes10.1016/j.msea.2011.02.071 ↗
18. Mechanisms underlying enhanced strength-ductility combinations in TRIP/TWIP Ti-12Mo alloy engineered via isothermal omega precipitation
19. In-situ microstructural investigations of the TRIP-to-TWIP evolution in Ti-Mo-Zr alloys as a function of Zr concentration10.1016/j.jmst.2020.04.078 ↗
20. Strengthening strategy for a ductile metastable β-titanium alloy using low-temperature aging10.1080/21663831.2017.1350211 ↗
21. A new titanium alloy with a combination of high strength, high strain hardening and improved ductility10.1016/j.scriptamat.2014.09.005 ↗
22. Effect of quasi-hydrostatic pressure on deformation mechanism in Ti-10Mo alloy10.3390/met10101387 ↗
23. Reversion martensitic phase transformation induced {332}<113> twinning in metastable β-Ti alloys10.1016/j.matlet.2020.127883 ↗
24. High-strength nanostructured Ti–12Mo alloy from ductile metastable beta state precursor10.1016/j.msea.2010.03.044 ↗
25. Martensitic microstructures and mechanical properties of as-quenched metastable β-type Ti–Mo alloys10.1007/s10853-016-9976-6 ↗
26. Deformation behavior of age-hardened Ti-Mo alloys10.1016/0001-6160(74)90057-1 ↗
27. Strong and ductile beta Ti–18Zr–13Mo alloy with multimodal twinning10.1080/21663831.2019.1595763 ↗
28. Understanding cross boundary {332}〈113〉twins in a Ti-15Mo alloy by composite Schmid factor10.1016/j.matchar.2022.112310 ↗
29. Understanding common grain boundary twins in Mg alloys by a composite Schmid factor10.1016/j.ijplas.2019.07.018 ↗
30. Twinning system selection in a metastable β-titanium alloy by Schmid factor analysis10.1016/j.scriptamat.2011.02.033 ↗
31. Stress-induced α″ martensitic phase transformation and martensitic twinning in a metastable β titanium alloy10.1016/j.jallcom.2020.157809 ↗
32. Corrosion behavior of Ti–Mo alloys cold rolled and heat treated10.1016/j.jallcom.2011.03.045 ↗
33. The effects of α″ and ω phases on the superelasticity and shape memory effect of binary Ti-Mo alloys10.1016/j.jallcom.2017.05.299 ↗
34. On the heterogeneous nature of deformation in a strain-transformable beta metastable Ti-V-Cr-Al alloy10.1016/j.actamat.2018.10.003 ↗
35. The role of stress induced martensite in ductile metastable beta Ti-alloys showing combined TRIP/TWIP effects10.1016/j.matpr.2015.07.336 ↗
36. From single phase to dual-phase TRIP-TWIP titanium alloys for the improvement of the yield strength
37. On the effect of chemical composition on yield strength of TWIP steels10.1016/j.msea.2017.01.080 ↗
38. Enhanced yield strength by fine grain strengthening and TRIP/TWIP effect of metastable β-type Ti-4V-2Mo-2Fe alloy with high ductility
39. ω phase strengthened 1.2GPa metastable β titanium alloy with high ductility10.1016/j.scriptamat.2018.10.043 ↗
40. Ultrahigh cryogenic strength and exceptional ductility at 20K in a TWIP Ti–15Mo alloy10.1016/j.scriptamat.2022.114595 ↗
41. Lei Wang, Mechanical properties of materials. 2014.
42. Atomic faulting induced exceptional cryogenic strain hardening in gradient cell–structured alloy10.1126/science.adj3974 ↗
43. Effect of stress-induced α″ martensite on Young's modulus of β Ti–33.6Nb–4Sn alloy10.1016/j.msea.2013.09.053 ↗
44. Effect of oxygen content on the mechanical properties and plastic deformation mechanisms in the TWIP/TRIP Ti–12Mo alloy
45. Study on the deformation mechanism of Ti–10Mo–1Fe solid-solution alloys with different cooling rates10.1016/j.jmrt.2023.02.150 ↗