The energy absorption capacity of a novel dual-sub-fold Miura foldcore subjected to axial crushing
Source abstract
Abstract
A modified Miura foldcore geometry was developed by introducing sub-folds into the cell walls of a conventional Miura foldcore. Similar to other sub-fold Miura foldcores, stable plastic hinge lines were generated at sub-fold sites under the guidance of the sub-folds and transformed into traveling hinge lines or stationary hinge lines in the subsequent crushing process. Therefore, in comparison to the conventional foldcore, the dual-sub-fold Miura foldcore exhibited a higher average crushing force with an improvement of 60.8 % in the optimum case. The dual-sub-fold Miura foldcore exhibited relatively lower stiffness at the sub-fold sites, effectively reducing the initial peak crushing force. This reduction in peak crushing force reached a maximum decrease of 70 %. Moreover, this dual-sub-fold foldcore was glued to two parallel rigid plates (top and bottom), making it more suitable for engineering applications. The parametric study indicated that the dual-sub-fold Miura foldcore exhibited predictable and stable deformation modes. It was found that the average crushing force could be effectively enhanced by reducing the core folding angle, elevating the sub-fold position, decreasing the sub-fold size, and elongating the foldcore. The theoretical model for predicting the energy absorption performance of the foldcore was also established.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Materials and Mechanics · Cellular and Composite Structures · Structural Analysis and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Experimental study on the dynamic responses of foam sandwich panels with different facesheets and core gradients subjected to blast impulse10.1016/j.ijimpeng.2019.103327 ↗
2. Geometrically nonlinear deflection and stress analysis of skew sandwich shell panel using higher-order theory10.1007/s00366-018-0609-3 ↗
3. Crushing responses and optimization of novel sandwich columns10.1016/j.compstruct.2021.113682 ↗
4. Crushing behaviors of the thin-walled sandwich column under axial load10.1016/j.tws.2020.107229 ↗
5. Quasi-static crushing of eggbox, cube, and modified cube foldcore sandwich structures10.1016/j.ijmecsci.2015.08.013 ↗
6. Worst multiple perturbation load approach of stiffened shells with and without cutouts for improved knockdown factors10.1016/j.tws.2014.05.004 ↗
7. Sandwich panel behavior under low-velocity impact with polyurethane core
8. Performance assessment of hybrid fibre-reinforced concrete (frc) under low-speed impact: Experimental analysis and optimized mixture
9. Experimental crashworthiness analysis of corrugated-core sandwich panels under impact loading10.1080/17445302.2024.2329864 ↗
10. Study on low-velocity impact response of kevlar/epoxy-polyurethane sandwich panels10.1088/1402-4896/ad13dd ↗
11. Optimization and investigations of low-velocity bending impact of thin-walled beams
12. A numerical model for bird strike of aluminium foam-based sandwich panels10.1016/j.ijimpeng.2004.09.004 ↗
13. Dynamic response and failure of sandwich plates with PVC foam core subjected to impulsive loading10.1016/j.ijimpeng.2017.06.005 ↗
14. Sandwich structures with textile-reinforced composite foldcores under impact loads10.1016/j.compstruct.2009.11.001 ↗
15. Sandwich materials for wind turbine blades—present and future10.1177/1099636208099710 ↗
16. Experimental investigation of static and fatigue behaviour of composites honeycomb materials using four point bending tests10.1016/j.compstruct.2008.01.015 ↗
17. Blast resistance of auxetic and honeycomb sandwich panels: Comparisons and parametric designs10.1016/j.compstruct.2017.03.018 ↗
18. Low-velocity impact of rectangular multilayer sandwich plates10.1016/j.tws.2019.04.033 ↗
19. Discrete tailored asymmetric sandwich structures10.1016/j.compstruct.2020.111990 ↗
20. Ultra-light asymmetric photovoltaic sandwich structures10.1016/j.compositesa.2009.05.015 ↗
21. Compressive resistance of the bio-inspired cuttlebone-like sandwich structure under quasi-static load10.1016/j.ijmecsci.2023.108222 ↗
22. Vibration analysis of thick-section sandwich structures in thermal environments10.1016/j.ijmecsci.2022.107937 ↗
23. A novel non-probabilistic reliability-based design optimization algorithm using enhanced chaos control method10.1016/j.cma.2017.01.037 ↗
24. Crashworthiness design for functionally graded foam-filled bumper beam10.1016/j.advengsoft.2015.03.005 ↗
25. Synthesis and characterization of honeycomb sandwiched composite material for automobile applications
26. Strength, stiffness, and panel peeling strength of carbon fiber-reinforced composite sandwich structures with aluminum honeycomb cores for vehicle body10.1016/j.compstruct.2017.10.038 ↗
27. Investigation of weight reduction of automotive body structures with the use of sandwich materials10.1016/j.trpro.2016.05.081 ↗
28. Determination of realistic worst imperfection for cylindrical shells using surrogate model10.1007/s00158-013-0922-9 ↗
29. Impact behavior of a cladding sandwich panel with aluminum foam-filled tubular cores10.1016/j.tws.2021.108459 ↗
30. Dewangan · 2022 · 131
31. Dynamic axial crushing of multilayer core structures of folded Chevron patterns10.1504/IJMPT.2004.004750 ↗
32. A continuous folding process for sheet materials10.1504/IJMPT.2004.004753 ↗
33. Parameters of a creasing-bending machine as applied to the scheme of transverse rotary shaping of chevron structures10.3103/S1068799807020122 ↗
34. Miura-base rigid origami: Parameterizations of first-level derivative and piecewise geometries10.1115/1.4025380 ↗
35. Miura-base rigid origami: Parametrizations of curved-crease geometries10.1115/1.4028532 ↗
36. Mechanical properties of Miura-based folded cores under quasi-static loads10.1016/j.tws.2014.05.001 ↗
37. Mechanical tests for foldcore base material properties10.1016/j.compositesa.2009.03.005 ↗
38. Foldcore sandwich structures and their impact behaviour: an overview
39. Aluminium foldcores for sandwich structure application: Mechanical properties and FE-simulation10.1016/j.tws.2015.01.003 ↗
40. Buckling of quasi-perfect cylindrical shell under axial compression: a combined experimental and numerical investigation10.1016/j.ijsolstr.2017.09.029 ↗
41. Tunable bandgaps and acoustic characteristics of perforated Miura-ori phononic structures10.1016/j.ijmecsci.2023.108389 ↗
42. Virtual testing of sandwich core structures using dynamic finite element simulations10.1016/j.commatsci.2008.09.017 ↗
43. Compression Response of Sandwich Structure with M-Type CFRP Foldcore10.4028/www.scientific.net/AMR.1049-1050.1071 ↗
44. Deformation of the Miura-ori patterned sheet10.1016/j.ijmecsci.2015.05.009 ↗
45. Residual strength simulations of sandwich panels after impact
46. Foldcores made of thermoplastic materials: Experimental study and finite element analysis10.1016/j.tws.2015.12.017 ↗
47. Evaluation of the effect of nanomaterials and fibers on the mechanical behavior of polymer-based nanocomposites using Box-Behnken response surface methodology10.1007/s00289-022-04517-3 ↗
48. Statistical predicting and optimization of the tensile properties of natural fiber bio-composites10.1007/s00289-023-04713-9 ↗
49. Virtual process chain for optimization of sandwich foldcores under flatwise compression10.1016/j.tws.2020.107121 ↗
50. Curved-creased origami mechanical metamaterials with programmable stabilities and stiffnesses
51. Modelling the impact behaviour of sandwich structures with folded composite cores10.1016/j.compositesa.2013.10.023 ↗
52. The behaviour of curved-crease foldcores under low-velocity impact loads10.1016/j.ijsolstr.2014.10.019 ↗
53. Design and performance of novel aircraft structures with folded composite cores10.1016/B978-0-08-100137-0.00029-8 ↗
54. Experimental and numerical investigations of residual strength after impact of sandwich panels10.1016/j.ijimpeng.2012.01.001 ↗
55. Low-velocity impact response and damage phenomena of hybrid S-shaped folded sandwich structure
56. Origami metamaterial with two-stage programmable compressive strength under quasi-static loading10.1016/j.ijmecsci.2020.105987 ↗
57. Quasi-static large deformation compressive behaviour of origami-based metamaterials10.1016/j.ijmecsci.2019.01.044 ↗
58. Novel stacked folded cores for blast-resistant sandwich beams10.1016/j.ijsolstr.2014.07.027 ↗
59. An origami-inspired structure with graded stiffness10.1016/j.ijmecsci.2017.12.026 ↗
60. Metallic stacked origami cellular materials: Additive manufacturing, properties, and modelling10.1016/j.ijsolstr.2019.09.007 ↗
61. Investigation on manufacturing and low-velocity impact performance of all-composite sandwich structure with S-type foldcore10.1016/j.compstruct.2022.115539 ↗
62. Experimental study on the flat-wise compression of foldcore sandwich paperboard
63. Quasi-static impact of indented foldcores10.1016/j.ijimpeng.2014.06.001 ↗
64. On the out-of-plane compression of a Miura-ori patterned sheet
65. Gattas · 2013