journal article·2019-06Open access

Influence of austenitizing parameters on microstructure and mechanical properties of Al-Si coated press hardened steel

Lindsay Golem, Lawrence Cho, John G. Speer, Kip O. Findley

Materials & Design· Volume 172

Abstract

The influence of the austenitizing parameters on the microstructure and mechanical behavior of Al-Si coated press hardened 22MnB5 steel was evaluated in this study. Increasing the austenitizing temperature and hold time resulted in microstructural homogenization, an increase in the prior austenite grain size (PAGS), and increased thickness of the substrate-coating interdiffusion layer. The mechanical properties were evaluated using smooth-sided tensile testing, double edge-notch tensile testing, and free bend testing. Refinement of the PAGS was, in general, beneficial for the mechanical performance of the press hardened steel (PHS); i.e. strength, notch displacement, maximum bending load, and bend angle at maximum load all generally increased with decreasing PAGS. The stress and strain state experienced during each type of test influenced the sensitivity of mechanical and fracture behavior of the PHS to austenitizing conditions. Furthermore, the thickening of the substrate-coating interdiffusion layer, composed of brittle intermetallic phases, at higher austenitizing temperature negatively influenced bendability of the PHS. Ductile fracture was commonly observed in the steel matrix composed of a lath martensitic structure. However, quasi-cleavage fracture was observed for the martensitic matrix with the largest PAGS, which implies a loss of toughness, possibly because of the increased substructure size.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Findley · 2018
2. Effect of prior austenite grain size on impact toughness of press hardened steel10.4271/2016-01-0359 ↗
3. Larour · 2015 · 281
4. Enloe · 2016 · 16
5. The influence of austenitization temperature on the mechanical properties of a prehardened mould steel10.4028/www.scientific.net/MSF.706-709.2140 ↗
6. Evolution of microstructure and properties of steel 22MnB5 due to short austenitization with subsequent quenching10.1002/srin.201600086 ↗
7. Effects of austenitizing temperature on microstructure and properties of hot-formed steel10.4028/b-LnIY97 ↗
8. Choi · 2013
9. Effects of untransformed ferrite on charpy impact toughness in 1.8-GPa-grade hot-press-forming steel sheets10.1016/j.msea.2017.09.027 ↗
10. Otani · 2015 · 411
11. Tribological investigation on friction and wear behaviour of coatings for hot sheet metal forming10.1016/j.wear.2011.02.011 ↗
12. Thermo-mechanical behavior of the Al–Si alloy coated hot stamping boron steel10.1016/j.matdes.2014.03.011 ↗
13. Corrosion resistance of different metallic coatings on press-hardened steels for automotive10.1002/srin.201000291 ↗
14. Phase formation at the interface between a boron alloyed steel substrate and an Al-rich coating10.1016/j.surfcoat.2013.03.045 ↗
15. Cracking and interfacial debonding of the Al–Si coating in hot stamping of pre-coated boron steel10.1016/j.apsusc.2014.08.043 ↗
16. ASTM E112-96 · 2004
17. Golem · 2017
18. VDA 238-100 · 2010
19. Microstructures and hardness of as-quenched martensites (0.1–0.5% C)10.1016/j.actamat.2011.05.061 ↗
20. On the plasticity mechanisms of lath martensitic steel10.1016/j.msea.2017.08.024 ↗
21. Absorption/desorption of diffusible hydrogen in aluminized boron steel10.2355/isijinternational.53.1295 ↗
22. Larour · 2013 · 02
23. Effect of boron on the tensile properties of B2 FeAl10.1016/0025-5416(86)90323-X ↗
24. Ductile fracture experiments with locally proportional loading histories10.1016/j.ijplas.2015.08.004 ↗
25. Pape · 2003
26. Notch effect of materials: strengthening or weakening?10.1016/j.jmst.2014.04.014 ↗
27. Fracture of 6056 aluminum sheet materials: effect of specimen thickness and hardening behavior on strain localization and toughness10.1016/j.msea.2004.12.018 ↗
28. Notch ductility of steels for automotive components10.1016/j.engfracmech.2014.06.007 ↗
29. Ductile rupture in thin sheets of two grades of 2024 aluminum alloy10.1016/j.msea.2004.04.008 ↗
30. Effect of block size on the strength of lath martensite in low carbon steels10.1016/j.msea.2005.12.048 ↗
31. Kennett · 2014
32. Effect of microstructural refinement on the toughness of low carbon martensitic steel10.1016/j.scriptamat.2007.10.053 ↗
33. Recent Advances in Ultrahigh-Strength Sheet Steels for Automotive Structural Use
34. Development of niobium alloyed press hardening steel with improved properties for crash performance
35. The Effect of Niobium and Molybdenum Co-addition on Bending Property of Hot Stamping Steels
36. Reverse metallurgical engineering towards sustainable manufacturing of vehicles using Nb and Mo alloyed high performance steels10.1007/s40436-013-0002-9 ↗
37. Characterization of the bendability of press-hardened 22MnB5 steel10.1002/srin.201300276 ↗
38. Effect of austenite pancaking on the microstructure, texture, and bendability of an ultrahigh-strength strip steel10.1007/s11661-013-2062-7 ↗
39. Influence of subsurface microstructure on the bendability of ultrahigh-strength strip steel10.1016/j.msea.2015.12.030 ↗
40. The relation between bendability, tensile properties and particle structure of low-carbon steel
41. Mechanical properties of quasicrystalline and crystalline phases in Al-Cu-Fe alloys10.1016/0022-3093(93)90393-C ↗
42. In-situ investigation on the deformation and damage behaviour of diamond-like carbon coated thin films under uniaxial loading10.1016/j.tsf.2008.09.104 ↗