Self-standing three-dimensional porous NiO/Ni anode materials for high-areal capacity lithium storage
Source abstract
Abstract
The low electron/ion migration rate and the high deformability of conventional two-dimensional (2D) electrodes limit the growing demand for energy storage devices with high areal capacity and stable cycling performance. Designing three-dimensional (3D) electrodes is a promising strategy to improve this defect. Herein, we prepare metallic nickel aerogel via a facile hydrothermal reduction route, which was annealed to obtain a self-standing 3D porous NiO/Ni anode. The electrode material displays a networked porous structure and good electrical conductivity, which mitigates the volume effect during cycling and provides excellent electron transport pathways and conductive ion channels. The unique structure with many electrochemical active sites performs higher areal capacity. When used as the anode of lithium-ion batteries (LIBs), a high reversible areal capacity of 1.93 mAh cm−2 is delivered at a current density of 1 mA cm−2 with a capacity retention ratio of 98.4% after 100 cycles. Remarkably, a large reversible capacity of 1.30 mAh cm−2 is also achieved at a relatively high current density of 6 mA cm−2. The 3D porous NiO/Ni anode material provides a new strategy for enhancing the energy density and stable cycling for practical application in power-type LIBs.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Development of flexible Li-ion batteries for flexible electronics10.1002/inf2.12117 ↗
2. Nano-sized transition-metal oxides as negative-electrode materials for lithium-ion batteries10.1038/35035045 ↗
3. Novel peapod NiO nanoparticles encapsulated in carbon fibers for high-efficiency supercapacitors and lithium-ion batteries10.1039/C5TA09699E ↗
4. Fe3O4 quantum dots embedded in porous carbon microspheres for long-life lithium-ion batteries10.1016/j.mtener.2019.01.012 ↗
5. Co3O4 and its composites for high-performance Li-ion batteries10.1016/j.cej.2018.03.024 ↗
6. Polymorphic Effects on Electrochemical Performance of Conversion-Based MnO2 Anode Materials for Next-Generation Li Batteries
7. Efficient utilisation of rod-like nickel oxalate in lithium-ion batteries: A case of NiO for the anode and LiNiO2 for the cathode10.1016/j.scriptamat.2019.10.051 ↗
8. Rational design of bamboo mat-like 3D Ni foam@NiO@PPy nanoarray electrode for binder-free, high-loading and high-areal capacity lithium storage10.1016/j.jallcom.2021.159957 ↗
9. Thick Binder-Free Electrodes for Li-Ion Battery Fabricated Using Templating Approach and Spark Plasma Sintering Reveals High Areal Capacity10.1002/aenm.201703031 ↗
10. Volume expansion of amorphous silicon electrodes during potentiostatic lithiation of Li-ion batteries10.1016/j.elecom.2020.106738 ↗
11. 1D Building Blocks-Intermingled Heteronanomats as a Platform Architecture For High-Performance Ultrahigh-Capacity Lithium-Ion Battery Cathodes10.1002/aenm.201670008 ↗
12. Interconnected Ni2P nanorods grown on nickel foam for binder free lithium ion batteries10.1016/j.electacta.2016.07.105 ↗
13. Cotton/rGO/carbon-coated SnO2 nanoparticle-composites as superior anode for Lithium ion battery10.1016/j.matdes.2016.11.081 ↗
14. Facile synthesis of three-dimensional MgFe2O4/graphene aerogel composites for high lithium storage performance and its application in full cell10.1016/j.matdes.2019.108043 ↗
15. Lithium Plating and Stripping on Carbon Nanotube Sponge10.1021/acs.nanolett.8b04376 ↗
16. Cotton-derived carbon cloth enabling dendrite-free Li deposition for lithium metal batteries10.1016/j.jpowsour.2020.228291 ↗
17. Controllable hydrogel-thermal synthesis of Mn2O3/CNT aerogels: Shape evolution, growth mechanism and electrochemical properties10.1016/j.matdes.2019.108022 ↗
18. Supramolecular Self-Assembly of 3D Conductive Cellulose Nanofiber Aerogels for Flexible Supercapacitors and Ultrasensitive Sensors10.1021/acsami.9b06527 ↗
19. Enhanced electrochemical performance of porous NiO–Ni nanocomposite anode for lithium ion batteries10.1016/j.jpowsour.2011.06.097 ↗
20. 3D hierarchically porous NiO/Graphene hybrid paper anode for long-life and high rate cycling flexible Li-ion batteries10.1016/j.jechem.2019.11.022 ↗
21. Carbon/Binder-Free NiO@NiO/NF with In Situ Formed Interlayer for High-Areal-Capacity Lithium Storage10.1002/aenm.201902068 ↗
22. Robust yarn electrodes for microbatteries with high areal capacity10.1016/j.matdes.2019.107620 ↗
23. CTAB-assisted growth of self-supported Zn2GeO4 nanosheet network on a conductive foam as a binder-free electrode for long-life lithium-ion batteries10.1039/C7NR05407F ↗
24. Self-supported materials for battery technology-A review10.1016/j.jallcom.2020.154844 ↗
25. Heterolayered, One-Dimensional Nanobuilding Block Mat Batteries10.1021/nl5024029 ↗
26. Influence of molar concentration on structural, optical and magnetic properties of NiO nanoparticles
27. Nanostructured gold films exhibiting almost complete absorption of light at visible wavelengths10.1007/s11705-018-1710-2 ↗
28. Simultaneously enhancing the strength and ductility in titanium matrix composites via discontinuous network structure10.1016/j.compositesa.2020.105971 ↗
29. Fire Alarm Wallpaper Based on Fire-Resistant Hydroxyapatite Nanowire Inorganic Paper and Graphene Oxide Thermosensitive Sensor10.1021/acsnano.8b00047 ↗
30. Formation of one-dimensional nickel wires by chemical reduction of nickel ions under magnetic fields10.1039/b704689h ↗
31. Synthesis and Magnetic Properties of Nickel Nanorods10.1021/nl0100522 ↗
32. Synthesis and One-Dimensional Self-Assembly of Acicular Nickel Nanocrystallites under Magnetic Fields10.1021/jp0361172 ↗
33. Synthesis and Tunable Assembly of Spear-like Nickel Nanocrystallites: From Urchin-like Particles to Prickly Chains10.1021/jp809224j ↗
34. Controlled Synthesis of 3D and 1D Nickel Nanostructures Using an External Magnetic Field Assisted Solution-Phase Approach10.1021/jp073075z ↗
35. Synthesis of coral-like nickel nanocrystallites via a dipolar-interaction-directed self-assembly process10.1016/j.jcrysgro.2004.09.075 ↗
36. Large scaled synthesis of chainlike nickel wires assisted by ligands10.1016/j.jcrysgro.2005.03.053 ↗
37. One-Pot Synthesis of Ultra-Light Nickel Nanofoams Composed of Nanowires and Their Transformation into Various Functional Nanofoams10.1002/smll.201201678 ↗
38. Multilayer Porous Three-Dimensional PM Composite Unbonded Paper Fiber Improves Electrochemical Properties of Nano-Si10.1007/s11837-020-04055-1 ↗
39. Core-Shell (W@WO3) Nanostructure to Improve Electrochemical Performance10.1021/acsaem.8b01869 ↗
40. Recent research of core–shell structured composites with NiCo2O4 as scaffolds for electrochemical capacitors10.1016/j.cej.2020.124747 ↗
41. Comparison of Nanoscaled and Bulk NiO Structural and Environmental Characteristics by XRD, XAFS, and XPS10.1021/cm300739y ↗
42. Facile synthesis of yolk-shelled NiO/Ni composites as cathode material for high-performance hybrid supercapacitors10.1016/j.jpowsour.2019.226977 ↗
43. Vanadium Carbide Based Composite for High Performance Oxygen Reduction Reaction and Lithium Ion Batteries10.1002/slct.201600461 ↗
44. MnOx Nanowires@MnOx Nanosheets Core-Shell Heterostructure Electrode for Superior Performance in Supercapacitor10.1142/S1793292020500149 ↗
45. The preparation of porous graphite and its application in lithium ion batteries as anode material10.1007/s10008-016-3260-1 ↗
46. Toward High-Performance Capacitive Potassium-Ion Storage: A Superior Anode Material from Silicon Carbide-Derived Carbon with a Well-Developed Pore Structure10.1002/adfm.202004348 ↗
47. The influence of different inert gas atmospheres to hierarchical structures and energy storage performances of MnO/C nanowires as anode of lithium-ion batteries10.1016/j.matlet.2021.129522 ↗
48. Advanced Matrixes for Binder-Free Nanostructured Electrodes in Lithium-Ion Batteries
49. Reduced graphene oxide as a multi-functional conductive binder for supercapacitor electrodes10.1016/j.ensm.2017.12.006 ↗
50. In-situ f ormation of Co1−xS hollow polyhedrons anchored on multichannel carbon nanofibers as self-supporting anode for lithium/sodium-ion batteries
51. Physico-Chemical and Electrochemical Properties of Nanoparticulate NiO/C Composites for High Performance Lithium and Sodium Ion Battery Anodes10.3390/nano7120423 ↗
52. Plasma Polymerization Enabled Polymer/Metal–Oxide Hybrid Semiconductors for Wearable Electronics10.1021/acsami.8b11094 ↗
53. Electrochemical investigation on nanoflower-like CuO/Ni composite film as anode for lithium ion batteries10.1016/j.electacta.2008.08.066 ↗
54. Electrochemical properties of NiO–Ni nanocomposite as anode material for lithium ion batteries10.1016/j.jpowsour.2006.03.039 ↗
55. Role of Conductive Carbon in Porous Li-Ion Battery Electrodes Revealed by Electrochemical Impedance Spectroscopy Using a Symmetric Cell10.1021/acs.jpcc.9b11929 ↗
56. Rapid one-step synthesis and electrochemical performance of NiO/Ni with tunable macroporous architectures10.1016/j.nanoen.2013.07.002 ↗
57. Synthesis of NiO Nanofibers Composed of Hollow Nanospheres with Controlled Sizes by the Nanoscale Kirkendall Diffusion Process and Their Electrochemical Properties10.1021/acsami.5b08793 ↗
58. Kinetic behavior of LiFePO4/C cathode material for lithium-ion batteries10.1016/j.electacta.2007.10.069 ↗
59. High temperature electrical energy storage: advances, challenges, and frontiers10.1039/C6CS00012F ↗