journal article·2016-08

Environmental performance of self-reinforced composites in automotive applications — Case study on a heavy truck component

S. Poulikidou, L. Jerpdal, A. Björklund, M. Åkermo

Materials & Design· Volume 103
Publisher page

Abstract

A screening environmental life cycle analysis (LCA) of the novel self-reinforced poly(ethylene therephthalate) (SrPET) is presented in this paper. A truck exterior panel is used as case study where a concept design made by SrPET is assessed and compared to a glass fibre reinforced composite and a thermoplastic blend that are currently used for the selected component. The results showed that the SrPET panel has 25% lower environmental impact compared to the current design, with no significant life cycle trade-offs. SrPET offers possibilities for weight reduction while maintaining good mechanical properties. As the impact during use phase is expected to decrease in the future the relative importance of manufacturing and end-of-life (EOL) will increase. Thus SrPET can be considered a competitive material for replacing existing energy intense non-recyclable composites.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fiber-reinforced polymer composites · Recycling and Waste Management Techniques · Polymer crystallization and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Do fiber-reinforced polymer composites provide environmentally benign alternatives? A life-cycle-assessment-based study10.1557/mrs.2012.33 ↗
2. Model for end of life treatment of polymer composite materials
3. Recycling of composite materials10.1016/j.cep.2011.09.007 ↗
4. European Parliament, Directive 2000/53/EC of the European Parliament and of the Council of 18 September 2000 on end-of life vehicles. 2000 (L269/34).
5. Challenges and alternatives to plastics recycling in the automotive sector10.3390/ma7085883 ↗
6. Energy recovery from heavy ASR by co-incineration in a fluidized bed combustor10.1007/s10098-012-0474-5 ↗
7. An international comparative study of end-of-life vehicle (ELV) recycling systems10.1007/s10163-013-0173-2 ↗
8. Automotive shredder residue (ASR): reviewing its production from end-of-life vehicles (ELVs) and its recycling, energy or chemicals' valorisation10.1016/j.jhazmat.2011.02.088 ↗
9. Self-reinforced polymeric materials: a review10.1016/j.progpolymsci.2010.07.002 ↗
10. Technology and development of self-reinforced polymer composites10.1007/12_2011_159 ↗
11. Single-polymer composites (SPCs): status and future trends10.1016/j.compscitech.2013.12.006 ↗
12. Compression and tensile properties of self-reinforced poly(ethylene terephthalate)-composites10.1016/j.polymertesting.2012.11.002 ↗
13. Influence of fibre shrinkage and stretching on the mechanical properties of self-reinforced poly(ethylene terephthalate) composite10.1177/0731684414541018 ↗
14. A material selection approach to evaluate material substitution for minimizing the life cycle environmental impact of vehicles10.1016/j.matdes.2015.06.079 ↗
15. SMC replacement with engineering thermoplastics in heavy commercial vehicle body panels market space
16. ISO 14040 · 2006
17. CSA Group, SPE-14040-14 · 2014
18. PréConsultants · 2008
19. Dones · 2007
20. DIRECTIVE 2009/33/EC on the promotion of clean and energy-efficient road transport vehicles
21. The ecoinvent database system: a comprehensive web-based LCA database10.1016/j.jclepro.2005.05.002 ↗
22. European Life Cycle Database (ELCD) v2.0. · 2006
23. Comfil ApS · 2014
24. Life cycle assessment of carbon fiber-reinforced polymer composites10.1007/s11367-011-0264-z ↗
25. Zackrisson · 2012
26. Environmental impact analysis of composite use in car manufacturing10.1016/j.cirp.2009.03.077 ↗
27. Connolly · 2013
28. Investigating improved vehicle dismantling and fragmentation technology10.1016/j.jclepro.2013.05.023 ↗
29. Doka · 2003
30. Shonfield · 2008
31. Frischknecht · 2007
32. Cumulative energy demand as predictor for the environmental burden of commodity production10.1021/es902870s ↗
33. Technical summary
34. Open-loop recycling: a LCA case study of PET bottle-to-fibre recycling10.1016/j.resconrec.2010.06.014 ↗
35. Materials selection in the life-cycle design process: a method to integrate mechanical and environmental performances in optimal choice10.1016/j.matdes.2004.04.006 ↗
36. Modelling the environmental performance of composite products: benchmark with traditional materials10.1016/j.matdes.2012.02.027 ↗