journal article·2019-11Open access

Experimental and numerical studies on the compressive mechanical properties of the metallic auxetic reentrant honeycomb

Zhichao Dong, Ying Li, Tian Zhao, Wenwang Wu, Dengbao Xiao, Jun Liang

Materials & Design· Volume 182

Abstract

In this paper, not only the effect of cell-wall thickness on the deformation mode of metallic auxetic reentrant honeycomb was firstly studied, but also the negative Poisson's ratio (NPR) effect on the crushing stress was also clarified by the quasi-static compressive experiments. Firstly, two types of typical reentrant hexagonal honeycombs with thin-walled and thick-walled cells were manufactured and compressive tests were carried out to characterize the deformation modes, negative Poisson's ratio distribution and crushing stress. Experiment results showed that the deformation mode of thin-walled honeycomb was quite different from that of thick-walled honeycomb, which has not been found in the existing reported papers. Secondly, a finite element (FE) model of the reentrant honeycomb was established and the FE results were systematically compared with the experimental results. The effects of honeycomb cell's number on the compressive deformation and the crushing stress of the honeycomb were studied. The results showed that once the honeycomb contained more than four cells in both transverse and horizontal directions, both the compressive deformation and the crushing stress were close to the experimental results. Finally, the energy absorption characteristics of reentrant honeycomb during compression were discussed.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Cellular and Composite Structures · Automotive and Human Injury Biomechanics · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Gibson · 1999
2. The mechanics of two-dimensional cellular materials
3. Foam structures with a negative Poisson's ratio10.1126/science.235.4792.1038 ↗
4. An isotropic three-dimensional structure with Poisson's ratio = −110.1007/BF00042531 ↗
5. On the conical indentation response of elastic auxetic materials: effects of Poisson's ratio, contact friction and cone angle10.1016/j.ijsolstr.2015.10.020 ↗
6. Tunable wave propagation in octa-chiral lattices with local resonators10.1016/j.compstruct.2019.03.076 ↗
7. Mechanical properties and deformation behavior of additively manufactured lattice structures of stainless steel10.1016/j.matdes.2018.02.062 ↗
8. Manufacturing, characterization and applications of lightweight metallic foams for structural applications
9. Compliant hexagonal periodic lattice structures having both high shear strength and high shear strain10.1016/j.matdes.2010.08.029 ↗
10. Dynamic indentation of auxetic and non-auxetic honeycombs under large deformation10.1016/j.compstruct.2018.09.066 ↗
11. The structure response of sandwich beams with metallic auxetic honeycomb cores under localized impulsive loading-experiments and finite element analysis
12. Impact and close-in blast response of auxetic honeycomb-cored sandwich panels: experimental tests and numerical simulations10.1016/j.compstruct.2017.08.020 ↗
13. Dynamic response of sandwich structures with graded auxetic honeycomb cores under blast loading10.1016/j.compositesb.2016.09.037 ↗
14. Effective in-plane elastic properties of auxetic honeycombs with spatial irregularity10.1016/j.mechmat.2016.01.009 ↗
15. Dynamic behaviour of auxetic gradient composite hexagonal honeycombs10.1016/j.compstruct.2016.03.044 ↗
16. Compression behavior of the graded metallic auxetic reentrant honeycomb: experiment and finite element analysis10.1016/j.msea.2019.04.116 ↗
17. In-plane elasticity of a multi re-entrant auxetic honeycomb10.1016/j.compstruct.2017.08.014 ↗
18. The influence of cell micro-structure on the in-plane dynamic crushing of honeycombs with negative Poisson's ratio10.1177/1099636214554180 ↗
19. In-plane dynamic crushing of honeycombs—a finite element study10.1016/S0734-743X(02)00056-8 ↗
20. Dynamic crushing strength analysis of Auxetic honeycombs10.1016/S0894-9166(16)30267-1 ↗
21. In-plane dynamic crushing of re-entrant auxetic cellular structure10.1016/j.matdes.2016.03.086 ↗
22. Tensile behavior of an auxetic structure: analytical modeling and finite element analysis10.1016/j.ijmecsci.2017.12.029 ↗
23. Large deformation of an auxetic structure in tension: experiments and finite element analysis10.1016/j.compstruct.2017.09.076 ↗
24. Three-dimensional modelling of auxetic sandwich panels for localised impact resistance10.1177/1099636215618539 ↗
25. Blast resistance of auxetic and honeycomb sandwich panels: comparisons and parametric designs10.1016/j.compstruct.2017.03.018 ↗
26. Dynamic uniaxial crushing of wood10.1016/S0734-743X(97)00016-X ↗
27. Dynamic crushing response of auxetic honeycombs under large deformation: theoretical analysis and numerical simulation10.1016/j.tws.2018.04.020 ↗
28. Effect of cell-wall angle on the in-plane crushing behaviour of hexagonal honeycombs10.1016/j.matdes.2012.10.050 ↗
29. Effect of auxetic structures on crash behavior of cylindrical tube10.1016/j.compstruct.2018.10.068 ↗
30. Plastic analyses of thin-walled steel honeycombs with re-entrant deformation style10.1016/j.msea.2017.01.056 ↗
31. An investigation of in-plane tensile properties of re-entrant chiral auxetic structure
32. Size effects and micromechanics of a porous solid10.1007/BF00547573 ↗
33. Size effects in ductile cellular solids. Part II: experimental results10.1016/S0020-7403(00)00043-6 ↗
34. Size effects in foams: experiments and modeling10.1016/j.pmatsci.2010.06.001 ↗
35. Significance of cell number on the bulk elastic properties of auxetic reentrant lattices
36. Compressive strain at the onset of densification of cellular solids10.1177/0021955X06063519 ↗