Post-dynamic α to β phase transformation and reverse transformation of Ti-5Al-3V alloy after hot deformation in two phase region
Source abstract
Abstract
The microstructural evolutions and resulted mechanical responses during isothermal holding of multipass hot deformation are essential aspects in the processing of high performance titanium alloys. In this work, isothermal holding testing was performed on a Ti-5Al-3V alloy after hot compression at temperatures of 900 °C, 930 °C and 960 °C, respectively. Stress relaxation, dilatometer measurements, and microstructure examinations (i.e. scanning electron microscope, electron backscatter diffraction and transmission electron microscope) were employed to investigate the phase transformation behaviors. The results showed a flow stress hardening phenomenon during the interrupted isothermal holding in two phase region. The post-dynamic transformation from α to β phase took place first during the early stage of isothermal holding after hot deformation. With longer isothermal holding time, the reverse transformation of meta-stable β phase to α phase was then observed. Under TEM, the reverse transformed α phases were isolated from quenched α' phases. The in-depth mechanisms of post-dynamic α to β phase transformation and reverse transformation were discussed as well.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Accelerated flow softening and dynamic transformation of Ti-6Al-4V alloy in two-phase region during hot deformation via coarsening α grain10.1016/j.jmst.2019.08.005 ↗
2. Dynamic transformation of Ti–6Al–4V during torsion in the two-phase region10.1007/s10853-018-2237-0 ↗
3. Phase transformation and dynamic recrystallization behaviors in a Ti55511 titanium alloy during hot compression10.1016/j.jallcom.2019.04.319 ↗
4. Dynamic transformation of deformed austenite at temperatures above the Ae(3)10.1016/j.pmatsci.2016.04.004 ↗
5. Role of mechanical activation in the dynamic transformation of austenite10.1016/j.actamat.2013.06.054 ↗
6. Determination of the critical stress for the initiation of dynamic transformation in commercially pure titanium10.1016/j.scriptamat.2017.02.022 ↗
7. Ultra-fine-grained ferrite prepared from dynamic reversal austenite during warm deformation
8. An analysis on effect of multipass twist extrusion process of AA6061 alloy10.1016/j.matdes.2013.03.066 ↗
9. Recrystallization in AISI 304 austenitic stainless steel during and after hot deformation10.1016/j.msea.2007.08.026 ↗
10. The dynamic, static and metadynamic recrystallization of a Nb-microalloyed steel10.2355/isijinternational.41.63 ↗
11. Static softening following multistage hot deformation of 7150 aluminum alloy: experiment and modeling10.1016/j.msea.2015.09.063 ↗
12. Dynamic and static softening behaviors of aluminum alloys during multistage hot deformation10.1016/j.jmatprotec.2003.12.020 ↗
13. Microstructural variations and kinetic behaviors during metadynamic recrystallization in a nickel base superalloy with pre-precipitated δ phase10.1016/j.matdes.2019.107584 ↗
14. Effect of hot deformation on γ″ and δ phase precipitation of Inconel 718 alloy during deformation & isothermal treatment10.1016/j.jallcom.2017.05.042 ↗
15. Deformation behavior and microstructure evolution in multistage hot working of TA15 titanium alloy: on the role of recrystallization10.1007/s10853-011-5564-y ↗
16. Strain path dependent evolutions of microstructure and texture in AZ80 magnesium alloy during hot deformation10.1016/j.jallcom.2019.07.262 ↗
17. Effects of holding time and Zener-Hollomon parameters on deformation behavior of cast mg-8Gd-3Y alloy during double-pass hot compression10.1016/j.jmst.2018.03.001 ↗
18. Metadynamic recrystallization behavior of AZ61 magnesium alloy10.1016/j.matdes.2013.12.051 ↗
19. The post-deformation recrystallization behaviour of magnesium alloy Mg–3Al–1Zn10.1016/j.scriptamat.2009.09.002 ↗
20. Effect of initial lamellar structure on globularization of hot multi-forged ELI grade Ti-6Al-4V alloy10.4028/www.scientific.net/MSF.558-559.529 ↗
21. Reverse transformation behavior of Ti-6Al-4V after deformation in the two-phase region10.1007/s11661-017-4403-4 ↗
22. Effect of multipass deformation at elevated temperatures on the flow behavior and microstructural evolution in Ti-6Al-4V10.1016/j.msea.2018.05.058 ↗
23. Microstructural evolution and kinetics for post-dynamic transformation in a plain low carbon steel10.2355/isijinternational.48.994 ↗
24. Dynamic stress–strain properties of Ti–Al–V titanium alloys with various element contents10.1007/s12598-013-0165-3 ↗
25. A metallurgical approach to individually assess the rheology of alpha and beta phases of Ti–6Al–4V in the two-phase domain10.1016/j.matchar.2014.01.001 ↗
26. Dynamic phase transformation during hot-forging process of a powder metallurgy α+β titanium alloy10.2320/matertrans.M2012042 ↗
27. Kinetics of post-dynamic coarsening and reverse transformation in Ti-6Al-4V10.1007/s11661-018-4952-1 ↗
28. Experimental study of dislocation mobility in a Ti–6Al–4V alloy10.1016/j.actamat.2007.07.032 ↗
29. Effect of Mn and Si on the dynamic transformation of austenite above the Ae3 temperature10.1016/j.actamat.2014.08.060 ↗
30. Microstructure and mechanical properties of Ti6321 alloy welded joint by EBW10.1016/j.ijlmm.2018.08.006 ↗
31. Opposing and driving forces associated with the dynamic transformation of Ti-6Al-4V10.1007/s11661-018-4551-1 ↗
32. The role of lattice defects, element partitioning and intrinsic heat effects on the microstructure in selective laser melted Ti-6Al-4V10.1016/j.actamat.2019.01.039 ↗
33. Variant selection and intervariant crystallographic planes distribution in martensite in a Ti–6Al–4V alloy10.1016/j.actamat.2014.06.064 ↗
34. On the process of transition of the cubic-body-centered modification into the hexagonal-close-packed modification of zirconium10.1016/S0031-8914(34)80244-3 ↗
35. Microstructure evolution during alpha-beta heat treatment of Ti-6Al-4V10.1007/s11661-003-0300-0 ↗
36. Formation of Widmanstätten alpha structure in a Ti–6Al–4V alloy10.2320/matertrans1989.35.238 ↗
37. Static globularization kinetics for Ti-17 alloy with initial lamellar microstructure10.1016/j.jallcom.2014.03.082 ↗
38. A stress relaxation method for following carbonitride precipitation in austenite at hot working temperatures10.1007/BF02674014 ↗
39. Effect of test method on stress-relaxation behavior of alloy 71810.1007/s11661-018-5092-3 ↗
40. Stress relaxation behavior and mechanisms in Ti-6Al-4V determined via in situ neutron diffraction: application to additive manufacturing10.1016/j.msea.2017.09.071 ↗