Heat-resistant aluminum alloy design using explainable machine learning
Source abstract
Abstract
The high-temperature strength of aluminum alloys must be enhanced for improving their applicability across industries. This study proposes a machine learning approach for developing heat-resistant aluminum alloys. Using a combination of correlation-based screening and genetic algorithms, feature selection was performed on descriptors derived from the atomic compositions of alloys. Then, alloy compositions and descriptors were used as input variables of the model to improve its robustness and applicability due to the richness of information. Four distinct alloys were discovered by employing Bayesian optimization within the framework of a quaternary alloy system. The best alloy demonstrated an exceptional high-temperature strength of 175 MPa at 300 °C in the absence of heat treatment. Microstructural analyses of these alloys indicated the critical role of vanadium-rich intermetallics in enhancing the high-temperature strength of aluminum alloys. Furthermore, the output of the model was explained using the SHapley Additive exPlanations method. The findings emphasize the critical importance of titanium and vanadium in enhancing the high-temperature strength of aluminum alloys tailored for environments with high thermal stress.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · High Temperature Alloys and Creep · Advanced Materials Characterization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Progress in structural materials for aerospace systems10.1016/j.actamat.2003.08.023 ↗
2. Recent developments in advanced aircraft aluminium alloys10.1016/j.matdes.2013.12.002 ↗
3. Thermo-mechanical analysis of functionally graded wheel-mounted brake disk10.1007/s12206-015-0914-3 ↗
4. Towards high-temperature applications of aluminium alloys enabled by additive manufacturing
5. Degradation of precipitation hardening in 7075 alloy subject to thermal exposure: A Cs-corrected STEM study10.1016/j.jallcom.2018.01.172 ↗
6. Precipitate coarsening and mechanical properties in 6082 aluminium alloy during long-term thermal exposure10.1016/j.jallcom.2022.164819 ↗
7. Theoretical and experimental study of precipitation and coarsening kinetics of θ′ phase in Al–Cu alloy10.1016/j.vacuum.2021.110263 ↗
8. Highly stable coherent nanoprecipitates via diffusion-dominated solute uptake and interstitial ordering10.1038/s41563-022-01420-0 ↗
9. Co-stabilization of θ′-Al2Cu and Al3Sc precipitates in Sc-microalloyed Al–Cu alloy with enhanced creep resistance10.1016/j.mtnano.2019.100035 ↗
10. Synergy of multiple precipitate/matrix interface structures for a heat resistant high-strength Al alloy10.1038/s41467-023-38730-z ↗
11. Effect of Fe Intermetallics on Microstructure and Properties of Al-7Si Alloys10.1007/s11837-019-03444-5 ↗
12. Effect of heat treatment and Fe content on the microstructure and mechanical properties of die-cast Al–Si–Cu alloys10.1016/j.matdes.2015.07.074 ↗
13. Review on Fe-Based Intermetallic Compounds in Al-Si Casting Alloys
14. Effects of trace Mn addition on the elevated temperature tensile strength and microstructure of a low-iron Al–Si piston alloy10.1016/j.matlet.2007.11.035 ↗
15. Cr-induced morphology change of primary Mn-rich phase in Al-Si-Cu-Mn heat resistant aluminum alloys and its contribution to high temperature strength10.1016/j.msea.2017.10.049 ↗
16. Effect of RE addition on solidification process and high-temperature strength of Al−12%Si−4%Cu−1.6%Mn heat-resistant alloy10.1016/S1003-6326(19)65020-X ↗
17. Tensile and fatigue properties of a cast aluminum alloy with Ti, Zr and V additions10.1016/j.msea.2011.07.018 ↗
18. Structure and properties of cast Al–Si based alloy with Zr–V–Ti additions and its evaluation of high temperature performance10.1016/j.jallcom.2013.11.209 ↗
19. Microstructure and high-temperature mechanical properties of new-type heat-resisting aluminum alloy Al6.5Cu2Ni0.5Zr0.3Ti0.25V under the T7 condition10.1016/j.matlet.2022.133503 ↗
20. Dramatically enhanced combination of ultimate tensile strength and electric conductivity of alloys via machine learning screening10.1016/j.actamat.2020.09.068 ↗
21. Machine learning assisted composition effective design for precipitation strengthened copper alloys10.1016/j.actamat.2021.117118 ↗
22. Machine learning–enabled high-entropy alloy discovery10.1126/science.abo4940 ↗
23. Efficient machine-learning model for fast assessment of elastic properties of high-entropy alloys10.1016/j.actamat.2022.117924 ↗
24. Phase prediction in high entropy alloys with a rational selection of materials descriptors and machine learning models10.1016/j.actamat.2019.11.067 ↗
25. Tailoring nanoprecipitates for ultra-strong high-entropy alloys via machine learning and prestrain aging10.1016/j.jmst.2020.07.009 ↗
26. Machine learning assisted design of high entropy alloys with desired property10.1016/j.actamat.2019.03.010 ↗
27. Accelerated discovery of high-strength aluminum alloys by machine learning10.1038/s43246-020-00074-2 ↗
28. Composition design of 7XXX aluminum alloys optimizing stress corrosion cracking resistance using machine learning10.1088/2053-1591/ab8492 ↗
29. High strength aluminum alloys design via explainable artificial intelligence10.1016/j.jallcom.2022.163828 ↗
30. Manipulation of mechanical properties of 7xxx aluminum alloy via a hybrid approach of machine learning and key experiments10.1016/j.jmrt.2022.06.015 ↗
31. Machine learning-aided design of aluminum alloys with high performance
32. Knowledge-aware design of high-strength aviation aluminum alloys via machine learning10.1016/j.jmrt.2023.03.041 ↗
33. A study on high strength, high plasticity
34. P. Shurkin, T. Akopyan, A. Musin, “Promising casting aluminum alloys without requirement for heat treatment” in (METAL, 2019), pp. 1210–1215.10.37904/metal.2019.742 ↗
35. “Diesel Engine: Applications of Aluminum Alloys” in Encyclopedia of Aluminum and Its Alloys (CRC Press
36. F. Pedregosa, G. Varoquaux, A. Gramfort, V. Michel, et al., Scikit-learn: Machine Learning in Python. MACHINE LEARNING IN PYTHON.
37. Extremely randomized trees10.1007/s10994-006-6226-1 ↗
38. C. E. Rasmussen, C. K. I. Williams, Gaussian processes for machine learning (MIT Press, Cambridge, Mass, 2006), Adaptive computation and machine learning.10.7551/mitpress/3206.001.0001 ↗
39. C. K. I. Williams, C. E. Rasmussen, Gaussian Processes for Regression.
40. GPy, GPy: A Gaussian process framework in python (2012), (available at http://github.com/SheffieldML/GPy).
41. T. Chen, C. Guestrin, “XGBoost: A Scalable Tree Boosting System” in Proceedings of the 22nd ACM SIGKDD International Conference on Knowledge Discovery and Data Mining (ACM, San Francisco California USA, 2016; https://dl.acm.org/doi/10.1145/2939672.2939785), pp. 785–794.10.1145/2939672.2939785 ↗
42. M. Abadi, P. Barham, J. Chen, Z. Chen, et al., TensorFlow: A system for large-scale machine learning.
43. F. Chollet, Keras (2015), (available at https://github.com/fchollet/keras).
44. T. Akiba, S. Sano, T. Yanase, T. Ohta, et al., “Optuna: A Next-generation Hyperparameter Optimization Framework” in Proceedings of the 25th ACM SIGKDD International Conference on Knowledge Discovery & Data Mining (ACM, Anchorage AK USA, 2019; https://dl.acm.org/doi/10.1145/3292500.3330701), pp. 2623–2631.10.1145/3292500.3330701 ↗
45. Accelerated discovery of high-performance Cu-Ni-Co-Si alloys through machine learning
46. Predicting the property contour-map and optimum composition of Cu-Co-Si alloys via machine learning
47. S. M. Lundberg, S.-I. Lee, A Unified Approach to Interpreting Model Predictions.
48. AI-V (Aluminum-Vanadium)10.1007/BF02877591 ↗
49. New generation of eutectic Al-Ni casting alloys for elevated temperature services10.1016/j.msea.2017.10.034 ↗
50. Effect of Fe content on the fracture behaviour of Al–Si–Cu cast alloys10.1016/j.matdes.2014.01.037 ↗
51. Elimination of edge cracks and centerline segregation of twin-roll cast aluminum strip by ultrasonic melt treatment10.1016/j.jmrt.2020.03.021 ↗
52. Characterization of intermetallics in aluminum alloy 300410.1016/1044-5803(90)90062-O ↗
53. Removal of Iron From Aluminum: A Review10.1080/08827508.2010.542211 ↗
54. Machine learning-assisted discovery of strong and conductive Cu alloys: data mining from discarded experiments and physical features
55. Criteria for developing castable, creep-resistant aluminum-based alloys – A review
56. Large strain hardening of magnesium containing in situ nanoparticles10.1515/ntrev-2021-0074 ↗
57. Design of heat-resistant Al–Mg –Zn–Cu–Ni quinary alloy: Controlling intermetallic phases and mechanical performance at elevated temperature10.1016/j.msea.2022.144055 ↗
58. A study on the composition optimization and mechanical properties of Al–Mg–Si cast alloys10.1016/j.msea.2010.03.103 ↗
59. Developing high performance mechanical properties at elevated temperature in squeeze cast Al-Cu-Mn-Fe-Ni alloys10.1016/j.matchar.2019.01.022 ↗
60. Elevated temperature ductility dip in an additively manufactured Al-Cu-Ce alloy10.1016/j.actamat.2021.117285 ↗
61. Ca-modified Al–Mg–Sc alloy with high strength at elevated temperatures due to a hierarchical microstructure10.1007/s10853-021-06310-5 ↗
62. Effect of temperature on the mechanical properties of Al–Si–Cu–Mg–Ni–Ce alloy10.1016/j.msea.2021.141762 ↗
63. Microstructure and mechanical properties of novel heat-resistant Al-12Ce-xCu-yMg alloy under laser melting10.1016/j.jallcom.2022.166359 ↗
64. Contributions to high temperature strengthening from three types of heat-resistant phases formed during solidification, solution treatment and ageing treatment of Al-Cu-Mn-Ni alloys respectively10.1016/j.msea.2019.138819 ↗
65. Synergistic effect of joint addition of Sb+Mn on high temperature strengthening in Al–4Cu heat-resistant alloy10.1016/j.msea.2022.143623 ↗