journal article·2022-12Open access

Achieving ultra-high strength rapidly in Ti-3Al-8V-6Cr-4Mo-4Zr alloy processed by directed energy deposition

Kun Zhang, Wen Hao Kan, Yuman Zhu, Samuel Chao Voon Lim, Xiang Gao, Chun Kit Sit, Chunguang Bai, Aijun Huang

Materials & Design· Volume 224

Abstract

This work investigates the viability of fabricating Ti-3Al-8V-6Cr-4Mo-4Zr (Beta-CTM) using laser-based and powder-fed directed energy deposition. To determine an appropriate ageing strategy, heat treatments were conducted at 440 °C and 480 °C over different periods of time and their effectiveness were determined through hardness testing. After identifying an optimal ageing treatment, tensile properties were investigated on the samples in the as-built and aged conditions. The microstructure, hardness and tensile properties of the as-built sample was found to resemble that of a conventionally-manufactured and solution-treated alloy. However, as compared to conventionally-manufactured Ti-3Al-8V-6Cr-4Mo-4Zr subjected to the same ageing temperature, the ageing process was much quicker with the DED-processed alloy because of its high dislocation density. Furthermore, the latter can also achieve much higher strength while also having comparable ductility. To achieve a similar ageing response and tensile behavior, conventionally-manufactured Ti-3Al-8V-6Cr-4Mo-4Zr would require cold-working prior to ageing. Carbon additions were also investigated to further accelerate the ageing response and to refine the β grain size. While the ageing response was much quicker and a much harder alloy can be produced, the carbon amount added was insufficient for β grain refinement, which resulted in reduced ductility without a change in strength.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Additive Manufacturing Materials and Processes · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Thermomechanical processing of beta titanium alloys—an overview10.1016/S0921-5093(97)00783-1 ↗
2. The use of β titanium alloys in the aerospace industry10.1361/105994905X75448 ↗
3. Candidate materials for high-strength fastener applications in both the aerospace and automotive industries10.1361/105994905X75466 ↗
4. A novel nano-particle strengthened titanium alloy with exceptional specific strength10.1038/s41598-019-48139-8 ↗
5. Tribological performance of surface engineered low-cost beta titanium alloy10.1016/j.wear.2019.01.032 ↗
6. Transition between mild and severe wear in titanium alloys10.1016/j.triboint.2015.08.020 ↗
7. Development of low cost and low elastic modulus of Ti-Al-Mo-Fe alloys for automotive applications10.4028/www.scientific.net/KEM.551.114 ↗
8. Beta titanium alloys: the lowest elastic modulus for biomedical applications: a review
9. Effect of solution treatment and aging on microstructure and tensile properties of high strength β titanium alloy, Ti–5Al–5V–5Mo–3Cr10.1016/j.matdes.2014.04.015 ↗
10. 2 - Review of additive manufacturing technologies and applications in the aerospace industry
11. Titanium for aerospace: Rationale and applications10.1007/BF00705316 ↗
12. Machining of aerospace titanium alloys10.1016/S0736-5845(00)00042-9 ↗
13. High strength heat-treatable β-titanium alloy for additive manufacturing10.1016/j.msea.2020.139646 ↗
14. Eliminating segregation defects during additive manufacturing of high strength β-titanium alloys
15. Towards β-fleck defect free additively manufactured titanium alloys by promoting the columnar to equiaxed transition and grain refinement10.1016/j.actamat.2021.117511 ↗
16. Microstructure and mechanical properties of selective laser melted Ti-3Al-8V-6Cr-4Zr-4Mo compared to Ti-6Al-4V10.1016/j.msea.2018.12.100 ↗
17. Ultrastrong nanotwinned titanium alloys through additive manufacturing
18. High stability and high strength β-titanium alloys for additive manufacturing10.1016/j.msea.2021.141326 ↗
19. Directed energy deposition (DED) process: state of the art10.1007/s40684-020-00302-7 ↗
20. An overview of additive manufacturing of titanium components by directed energy deposition: microstructure and mechanical properties10.3390/app7090883 ↗
21. Hybrid manufacturing: a review of the synergy between directed energy deposition and subtractive processes10.1007/s00170-020-06062-7 ↗
22. Hierarchical layered and refined grain structure of Inconel 718 superalloy produced by rolling-assisted directed energy deposition
23. Effects of combining ultrasonic micro-forging treatment with laser metal wire deposition on microstructural and mechanical properties in Ti–6Al–4V alloy10.1016/j.matchar.2020.110187 ↗
24. Hot forging wire and arc additive manufacturing (HF-WAAM)
25. A comprehensive review of the methods and mechanisms for powder feedstock handling in directed energy deposition
26. Impact of metal additive manufacturing parameters on the powder bed fusion and direct energy deposition processes: a comprehensive review10.1007/s40964-021-00180-8 ↗
27. A review on wire and arc additive manufacturing of titanium alloy10.1016/j.jmapro.2021.08.018 ↗
28. A strong and ductile Ti-3Al-8V-6Cr-4Mo-4Zr (Beta-C) alloy achieved by introducing trace carbon addition and cold work10.1016/j.scriptamat.2019.11.021 ↗
29. Microstructural control in a Ti-based alloy by changing laser processing mode and power during direct laser deposition10.1016/j.matlet.2016.05.038 ↗
30. Understanding the mechanical behaviour and the large strength/ductility differences between FCC and BCC AlxCoCrFeNi high entropy alloys10.1016/j.jallcom.2017.08.067 ↗
31. The ageing response of direct laser deposited metastable β-Ti alloy, Ti–5Al–5Mo–5V–3Cr
32. Influence of continuous grain boundary α on ductility of laser melting deposited titanium alloys10.1016/j.msea.2016.03.034 ↗
33. Processing of Ti-5553 with improved mechanical properties via an in-situ heat treatment combining selective laser melting and substrate plate heating10.1016/j.matdes.2017.05.010 ↗
34. Effect of duplex aging on the initiation and propagation of fatigue cracks in the solute-rich metastable β titanium alloy Ti 38–64410.1007/s11661-011-0662-7 ↗
35. Microstructural dependence of strength and ductility in a novel high strength β titanium alloy with Bi-modal structure10.1016/j.msea.2019.138086 ↗
36. Development of a novel metastable beta titanium alloy with ultrahigh yield strength and good ductility based on laser power bed fusion
37. Modelling strengthening mechanisms in beta-type Ti alloys10.1016/j.msea.2019.04.027 ↗
38. Strengthening mechanism and corrosion resistance of beta-type Ti-Nb-Zr-Mn alloys10.1016/j.msec.2020.110728 ↗
39. Effects of heat treatment on microstructures and mechanical properties of Ti-38644 alloy for aerospace fasteners10.4028/www.scientific.net/MSF.913.109 ↗
40. Microstructural tailoring and mechanical properties of a multi-alloyed near β titanium alloy Ti-5321 with various heat treatment10.1016/j.msea.2017.11.029 ↗
41. A low-cost hierarchical nanostructured beta-titanium alloy with high strength10.1038/ncomms11176 ↗
42. Tuning the scale of α precipitates in β-titanium alloys for achieving high strength10.1016/j.scriptamat.2018.05.040 ↗
43. Fatigue properties of duplex-aged Ti 38–644 metastable beta titanium alloy10.1016/j.proeng.2010.03.212 ↗
44. Quick reference guide for β titanium alloys in the 00s10.1361/105994905X75646 ↗
45. C.S. Young, J.C. Durham, Industrial applications of titanium and zirconium: fourth volume: a symposium, ASTM International, 1986.10.1520/STP917-EB ↗
46. The influence of microstructure on mechanical properties in Ti-3AI-8V-6Cr-4Mo-4Zr (Beta-C)10.1007/BF02646879 ↗
47. Titanium alloys and processing for high speed aircraft10.1016/S0921-5093(97)00818-6 ↗
48. The relationship between microstructure and age hardening response in the metastable beta titanium alloy Ti- 11.5 Mo-6 Zr-4.5 Sn (beta III)10.1007/BF02700435 ↗
49. Analytical electron microscopy of C-free and C-containing Ti–15–310.1016/j.actamat.2006.07.002 ↗
50. The influence of carbon on precipitation of α in Ti–5Al–5Mo–5V–3Cr10.1016/j.msea.2010.08.032 ↗
51. The effects produced by the rate of heating on the aging temperature on the structure and hardening of the Ti–10V–2Fe–3Al titanium alloy with different carbon contents10.1134/S0031918X22060084 ↗
52. On the Role of C addition on α precipitation in a β titanium alloy10.1007/s11661-013-2174-0 ↗
53. Effect of boron and carbon addition on microstructure and mechanical properties of metastable beta titanium alloys10.1016/j.matdes.2014.11.004 ↗
54. Morphology, microstructure and decomposition behavior of M2C carbides in high speed steel10.1016/S1006-706X(17)30007-9 ↗
55. Fabrication and characterization of microstructure of stainless steel matrix composites containing up to 25 vol% NbC10.1016/j.matchar.2016.07.019 ↗
56. Influence of tempering temperature on stability of carbide phases in 2.6 Cr-0.7 Mo-0.3 V steel with various carbon content10.1007/BF02647972 ↗
57. W.H. Kan, V. Bhatia, K. Dolman, T. Lucey, X. Tang, L. Chang, G. Proust, J. Cairney, A study on novel AISI 304 stainless steel matrix composites reinforced with (Nb0. 75, Ti0. 25) C, Wear 398 (2018) 220–226.10.1016/j.wear.2017.12.011 ↗
58. Precipitation of (Ti, Zr, Nb, Ta, Hf) C high entropy carbides in a steel matrix10.1016/j.mtla.2019.100540 ↗