journal article·2023-06Open access

Crystalline or amorphous? A critical evaluation of phenomenological phase selection rules

K. Wieczerzak, A. Sharma, C. Hain, J. Michler

Materials & Design· Volume 230

Abstract

In this work, we reviewed the available phase selection rules comprising atomic size and topological aspects, entropies, enthalpies, melting points, valence and itinerant electron concentrations, as well as electronegativity, and validated them using a carefully prepared database of CuTiZr alloys, to assess their strengths and weaknesses. Substantially increasing interest over the last two decades in high-entropy alloys and metallic glasses motivated the search for phase selection rules that could support the designing of new alloys. These rules are most often based on phenomenological correlation between structure and topological-, thermodynamic- and/or electronic structure-related properties of alloy systems. The available phase selection criteria are, therefore, not scientifically derived, but rather statistically constructed from available experimental data. Thus, they contain potential pitfalls, hindering the rational interpretation of obtained results. With this in mind, this work discusses the importance of defining the influence of phase transformation kinetics and synthesis method on an alloy’s final structure, while highlighting the challenges of using phenomenological alloying guidelines. Furthermore, we show that the interpretation of available phase selection criteria without caution may lead to the designing and fabrication of alloys with undesired phases.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · Phase-change materials and chalcogenides · Chalcogenide Semiconductor Thin Films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Cahn · 1996
2. Stabilization of metallic supercooled liquid and bulk amorphous alloys10.1016/S1359-6454(99)00300-6 ↗
3. Confusion by design10.1038/366303a0 ↗
4. Effect of the atomic size distribution on glass forming ability of amorphous metallic alloys10.1016/S0025-5408(01)00715-2 ↗
5. A. Takeuchi, A. Inoue. Calculations of mixing enthalpy and mismatch entropy for ternary amorphous alloys. Mater. Trans. JIM. 41 (2000). 1372–1378. https://doi.org/https://doi.org/10.2320/matertrans1989.41.1372.10.2320/matertrans1989.41.1372 ↗
6. Solid-solution phase formation rules for multi-component alloys10.1002/adem.200700240 ↗
7. Relationship between the widths of supercooled liquid regions and bond parameters of Mg-based bulk metallic glasses10.1016/S0022-3093(03)00155-8 ↗
8. More than entropy in high-entropy alloys: Forming solid solutions or amorphous phase10.1016/j.intermet.2013.05.002 ↗
9. Entropies in alloy design for high-entropy and bulk glassy alloys10.3390/e15093810 ↗
10. Prediction of high-entropy stabilized solid-solution in multi-component alloys10.1016/j.matchemphys.2011.11.021 ↗
11. Atomic-size effect and solid solubility of multicomponent alloys10.1016/j.scriptamat.2014.09.010 ↗
12. Cohesion in alloys - fundamentals of a semi-empirical model10.1016/0378-4363(80)90054-6 ↗
13. Phase stability in high entropy alloys: Formation of solid-solution phase or amorphous phase10.1016/S1002-0071(12)60080-X ↗
14. High-entropy alloy: challenges and prospects10.1016/j.mattod.2015.11.026 ↗
15. Bulk metallic glass formation in Cu-Zr-Ti ternary system10.1016/j.jnoncrysol.2007.05.093 ↗
16. Prediction of the glass forming ability in Cu-Zr binary and Cu-Zr-Ti ternary alloys10.1016/j.intermet.2007.07.008 ↗
17. Glass-forming ability and mechanical properties of Cu50Zr50-xTix alloys10.1016/j.msea.2005.08.207 ↗
18. Microstructural, thermal and mechanical behavior of co-sputtered binary Zr-Cu thin film metallic glasses10.1016/j.tsf.2013.05.177 ↗
19. Composition design and mechanical properties of ternary Cu-Zr-Ti bulk metallic glasses10.1016/j.matdes.2013.10.057 ↗
20. Combinatorial development of bulk metallic glasses10.1038/nmat3939 ↗
21. Combinatorial development of antibacterial Zr-Cu-Al-Ag thin film metallic glasses
22. On the new criterion to assess the glass-forming ability of metallic alloys10.1016/j.msea.2009.01.063 ↗
23. Thermo-Calc and DICTRA, Computational tools for materials science10.1016/S0364-5916(02)00037-8 ↗
24. Thermodynamic assessment of the Cu-Ti-Zr system. III. Cu-Ti-Zr system10.1007/s11106-008-9062-y ↗
25. Thermodynamic approach for predicting the glass forming ability of amorphous alloys10.1016/j.intermet.2004.04.001 ↗
26. M.H. Cohen, D. Turnbull. Composition requirements for glass formation in metallic and ionic systems, Nature. 189 (1961) 131–132. https://doi.org/doi.org/10.1038/189131b0.10.1038/189131b0 ↗
27. Kurz · 1992
28. The scavenging effect of different rare-earth elements in the low-purity Zr50Cu40Al10 alloy10.1007/s11661-022-06714-1 ↗
29. Direct comparison between critical cooling rate and some quantitative parameters for evaluation of glass-forming ability in Pd-Cu-Ni-P alloys10.2320/matertrans.43.1913 ↗
30. Pd30Pt17.5Cu32.5P20 alloy with low critical cooling rate of 0.067 K/s
31. Fabrication and mechanical properties of Mg65Cu15Ag5Pd5Gd10 bulk metallic glass10.2320/matertrans.44.2141 ↗
32. Formation of crystal nuclei in liquid metals10.1063/1.1699435 ↗
33. Under what conditions can a glass be formed?10.1080/00107516908204405 ↗
34. D.R. Uhlmann. A kinetic treatment of glass transition, J. Non. Cryst. Solids. 7 (1972) 337–348. https://doi.org/doi.org/10.1016/0022-3093(72)90269-4.10.1016/0022-3093(72)90269-4 ↗
35. Nucleating heterogeneities and glass formation10.1016/0022-3093(76)90066-1 ↗
36. The kinetics of formation of a Au-Ge-Si metallic glass10.1016/0022-3093(75)90057-5 ↗
37. Metallic glasses and the avoidance of crystallization in metallic melts10.1039/dc9766100100 ↗
38. On the approximation of the free energy change on crystallization10.1016/0001-6160(79)90076-2 ↗
39. The cooling rate dependence of crystallization for liquid copper: A molecular dynamics study10.1063/1.1362292 ↗
40. Ferritic stainless steel welding metallurgy10.4028/www.scientific.net/KEM.69-70.167 ↗
41. Metastable structures in metallurgy10.1007/BF02654454 ↗
42. Photocalorimetric cooling rate measurements on a Ni-5 wt% Al alloy rapidly solidified by melt spinning10.1016/0001-6160(85)90005-7 ↗
43. The effect of the melt-spinning processing parameters on the rate of cooling10.1016/S0921-5093(01)01346-6 ↗
44. Cooling rates in splat cooling10.1016/0025-5416(67)90013-4 ↗
45. The formation, structure and crystallization of non-crystalline nickel produced by splat-quenching10.1007/BF00551430 ↗
46. Synthesis of amorphous niobium-nickel alloys by vapor quenching
47. Effects of system size and cooling rate on the structure and properties of sodium borosilicate glasses from molecular dynamics simulations10.1063/1.5007083 ↗
48. Cooling rate dependence of solidification for liquid aluminium: a large-scale molecular dynamics simulation study10.1039/C6CP02172G ↗
49. Suryanarayana · 2011
50. Cooling rate evaluation during solidification in the suction casting process10.1016/j.jmrt.2020.09.082 ↗
51. Cooling rate evaluation for bulk amorphous alloys from eutectic microstructures in casting processes10.2320/matertrans.43.1670 ↗
52. In-situ characterization of laser-powder interaction and cooling rates through high-speed imaging of powder bed fusion additive manufacturing10.1016/j.matdes.2017.09.044 ↗
53. Subsurface cooling rates and microstructural response during laser based metal additive manufacturing10.1038/s41598-020-58598-z ↗
54. Effect of real-time cooling rate on microstructure in Laser Additive Manufacturing10.1016/j.jmatprotec.2016.01.017 ↗
55. Fusion zone geometries, cooling rates and solidification parameters during wire arc additive manufacturing10.1016/j.ijheatmasstransfer.2018.08.111 ↗
56. Thermal behavior and microstructural evolution during laser deposition with laser-engineered net shaping: Part I. Numerical calculations, Metall. Mater. Trans. A Phys. Metall
57. As-fabricated and heat-treated microstructures of the Ti-6Al-4V alloy processed by selective laser melting10.1007/s11661-011-0731-y ↗
58. Simulation of convection and macrosegregation in a large steel ingot10.1007/s11661-999-0284-5 ↗
59. Numerical simulation of steel ingot solidification process10.1016/j.jmatprotec.2004.07.094 ↗
60. Influence of cooling condition on solidification of large steel ingot D iecasting
61. Comparison of mechanical behavior between bulk and ribbon Cu-based metallic glasses10.1016/j.msea.2006.05.042 ↗
62. Bulk metallic glasses as structural Materials: A review10.1002/adem.201600066 ↗
63. Additive manufacturing of an iron-based bulk metallic glass larger than the critical casting thickness10.1016/j.apmt.2018.02.011 ↗
64. Additive manufacturing of advanced multi-component alloys: bulk metallic glasses and high entropy alloys10.1002/adem.201700874 ↗
65. Groza · 2007
66. Determination of critical cooling rates in metallic glass forming alloy libraries through laser spike annealing10.1038/s41598-017-07719-2 ↗
67. J.E. Lennard-Jones. The interaction of atoms and molecules with solid surfaces-XI—The dispersal of energy from an activated link, Proc. R. Soc. London, Ser. A. 163 (1937). 127–131.10.1098/rspa.1937.0214 ↗
68. The structure of crystal surfaces10.1039/df9592800016 ↗
69. Collision of a gas atom with a cold surface10.1063/1.1730869 ↗
70. The dynamics of simple cubic lattices. I. Applications to the theory of thermal accommodation coefficients10.1016/0022-3697(62)90173-7 ↗
71. The dynamics of simple cubic lattices - II: The effects of surface impurities on the lattice motion10.1016/0022-3697(62)90227-5 ↗
72. Nano-Calphad: Extension of the Calphad method to systems with nano-phases and complexions10.1007/s10853-012-6772-9 ↗
73. 106-Particle molecular-dynamics study of homogeneous nucleation of crystals in a supercooled atomic liquid10.1103/PhysRevB.41.7042 ↗
74. Cooling-rate effects in amorphous silica: A computer-simulation study10.1103/PhysRevB.54.15808 ↗
75. Ultrastable glasses from in silico vapour deposition10.1038/nmat3521 ↗
76. Structural origins of Johari-Goldstein relaxation in a metallic glass
77. Atomic size effect on the formability of metallic glasses10.1016/0022-3093(84)90210-2 ↗
78. A structural model for metallic glasses10.1038/nmat1219 ↗
79. The efficient cluster packing model – An atomic structural model for metallic glasses10.1016/j.actamat.2006.06.002 ↗
80. An assessment of binary metallic glasses: Correlations between structure, glass forming ability and stability10.1179/095066010X12646898728200 ↗
81. Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys10.1063/1.3587228 ↗
82. The linear mixture rule in chemical kinetics. II Thermal dissociation of diatomic molecules10.1016/0301-0104(88)87133-7 ↗
83. Machine learning assisted design of high entropy alloys with desired property10.1016/j.actamat.2019.03.010 ↗
84. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
85. Equation of state for nonattracting rigid spheres10.1063/1.1672048 ↗
86. Equilibrium thermodynamic properties of the mixture of hard spheres10.1063/1.1675048 ↗
87. Thermodynamic considerations on the formation and stability of metallic glasses10.1016/0001-6160(74)90112-6 ↗
88. Separating the configurational and vibrational entropy contributions in metallic glasses Hillary10.1038/nphys4142 ↗
89. The generalized thermodynamic rule for phase selection in multicomponent alloys10.1016/j.intermet.2014.12.011 ↗
90. A geometrical parameter for the formation of disordered solid solutions in multi-component alloys10.1016/j.intermet.2014.04.019 ↗
91. High rate thick film growth10.1146/annurev.ms.07.080177.001323 ↗
92. Quantitative evaluation of critical cooling rate for metallic glasses10.1016/S0921-5093(00)01446-5 ↗
93. Electronic structure of alloys
94. A quantum-mechanical critique of the miedema rules for alloy formation, Solid State Phys. - Adv
95. Entropy and energy, - A universal competition10.3390/e10040462 ↗
96. Design of high entropy alloys: A single-parameter thermodynamic rule10.1016/j.scriptamat.2015.03.023 ↗
97. On the heat of formation of solid alloys10.1016/0022-5088(75)90034-X ↗
98. On the heat of mixing of liquid alloys - I10.1016/0022-5088(76)90270-8 ↗
99. On the heat of mixing of liquid alloys - I10.1016/0022-5088(76)90215-0 ↗
100. Predicting heat effects in alloys10.1016/0378-4363(81)91003-2 ↗