Beta-type Ti-Nb-Zr-Cr alloys with large plasticity and significant strain hardening
Source abstract
Abstract
A series of Ti-25Nb-8Zr-xCr (x = 0, 2, 4, 6, 8 wt%) alloys were designed based on DV-Xα cluster method and e / a ¯ - Δr ¯ diagram with an anticipation to obtain high plasticity and significant strain hardening. The designed alloys were produced through cold crucible levitation melting technique in order to effectively investigate their microstructures and mechanical properties. The addition of Cr significantly enhances the β stability in the microstructures of the Ti-25Nb-8Zr-xCr alloys. Both yield strength and hardness of the studied alloys increase due to the effect of solid-solution strengthening. By constrast, the plasticity, maximum strength and strain hardening rate are influenced by the β stability as well as the distinct deformation mechanisms . None of the alloys comprising Cr fail up to 100 kN (the load capacity used) and all show impressive plasticity (~75%) and superior maximum compressive strength (~4.5 GPa) at 100 kN. Moreover, the deformation bands, which are found around the hardness indentations , are analyzed for all the investigated alloys. The fracture behaviors of the Ti-25Nb-8Zr-xCr alloys are also studied to observe the characteristics related to crack propagation , plastic deformation and the formation of shear bands.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. Early plastic deformation behaviour and energy absorption in porous β-type biomedical titanium produced by selective laser melting10.1016/j.scriptamat.2018.05.010 ↗
2. Corrosion behaviour of selective laser melted Ti-TiB biocomposite in simulated body fluid10.1016/j.electacta.2017.02.112 ↗
3. Additive manufacturing of titanium alloys by electron beam melting: a review10.1002/adem.201700842 ↗
4. On the design of new β-metastable titanium alloys with improved work hardening rate thanks to simultaneous TRIP and TWIP effects10.1016/j.scriptamat.2012.01.049 ↗
5. Microstructure evolution and superelastic behavior in Ti-35Nb-2Ta-3Zr alloy processed by friction stir processing10.1016/j.actamat.2017.03.079 ↗
6. Deformation and strength characteristics of laves phases in titanium alloys10.1016/j.matdes.2019.107891 ↗
7. A review on biomedical titanium alloys: recent progress and prospect10.1002/adem.201801215 ↗
8. High-strength β stabilized Ti-Nb-Fe-Cr alloys with large plasticity10.1016/j.msea.2018.07.031 ↗
9. Compressive and fatigue behavior of beta-type titanium porous structures fabricated by electron beam melting10.1016/j.actamat.2016.12.052 ↗
10. Study of the influence of Zr on the mechanical properties and functional response of Ti-Nb-Ta-Zr-O alloy for orthopedic applications10.1016/j.matdes.2018.107555 ↗
11. Investigations into Ti–(Nb, Ta)–Fe alloys for biomedical applications10.1016/j.actbio.2015.12.010 ↗
12. Development of Ti–Nb–Zr alloys with high elastic admissible strain for temporary orthopedic devices10.1016/j.actbio.2015.03.023 ↗
13. Electron beam melted beta-type Ti–24Nb–4Zr–8Sn porous structures with high strength-to-modulus ratio10.1016/j.jmst.2016.03.020 ↗
14. Mechanical behavior and phase transformation of β-type Ti-35Nb-2Ta-3Zr alloy fabricated by 3D-printing10.1016/j.jallcom.2019.03.138 ↗
15. Effect of α″martensite on the microstructure and mechanical properties of beta-type Ti–Fe–Ta alloys10.1016/j.matdes.2015.03.028 ↗
16. Phase transition, microstructural evolution and mechanical properties of Ti-Nb-Fe alloys induced by Fe addition10.1016/j.matdes.2016.02.094 ↗
17. A new titanium alloy with a combination of high strength, high strain hardening and improved ductility10.1016/j.scriptamat.2014.09.005 ↗
18. A novel high-strength β-Ti alloy with hierarchical distribution of α-phase: the superior combination of strength and ductility10.1016/j.matdes.2019.107640 ↗
19. A semi-empirical approach to the prediction of deformation behaviors of β-Ti alloys10.1016/j.scriptamat.2018.08.035 ↗
20. Transformation-induced plasticity and high strength in beta titanium alloy manufactured by selective laser melting10.1016/j.mtla.2019.100299 ↗
21. First principles theoretical investigations of low Young's modulus beta Ti–Nb and Ti–Nb–Zr alloys compositions for biomedical applications10.1016/j.msec.2015.01.061 ↗
22. Commercially pure titanium (cp-Ti) versus titanium alloy (Ti6Al4V) materials as bone anchored implants—is one truly better than the other?10.1016/j.msec.2016.01.032 ↗
23. Investigation of early stage deformation mechanisms in a metastable β titanium alloy showing combined twinning-induced plasticity and transformation-induced plasticity effects10.1016/j.actamat.2013.07.019 ↗
24. The role of stress induced martensite in ductile metastable beta Ti-alloys showing combined TRIP/TWIP effects
25. Ultrafine grained Ti-based composites with ultrahigh strength and ductility achieved by equiaxing microstructure10.1016/j.matdes.2015.04.032 ↗
26. Theoretical design of b-type titanium alloys, tinanium'92, science and technology
27. General approach to phase stability and elastic properties of β-type Ti-alloys using electronic parameters10.1016/j.scriptamat.2006.04.022 ↗
28. Design and mechanical properties of new β type titanium alloys for implant materials10.1016/S0921-5093(97)00808-3 ↗
29. Mechanical characterization and deformation behavior of β-stabilized Ti-Nb-Sn-Cr alloys10.1016/j.jallcom.2019.04.079 ↗
30. Effect of Nb content on microstructure, property and in vitro apatite-forming capability of Ti-Nb alloys fabricated via selective laser melting10.1016/j.matdes.2017.04.026 ↗
31. Effect of Sn and Zr content on superelastic properties of Ti-Mo-Sn-Zr biomedical alloys10.1016/j.msea.2017.07.097 ↗
32. The effect of Zr on the microstructure and properties of Ti-35Nb-XZr alloy10.1016/j.msea.2016.07.069 ↗
33. The effect of ternary additions on the decomposition of metastable beta-phase titanium alloys10.1007/BF02663337 ↗
34. Structure and mechanical properties of as-cast Ti–5Nb–xCr alloys10.1016/j.matdes.2013.04.001 ↗
35. Microstructure and mechanical properties of Ti–Zr–Cr biomedical alloys10.1016/j.msec.2015.02.028 ↗
36. Deformation mechanisms in a metastable beta titanium twinning induced plasticity alloy with high yield strength and high strain hardening rate10.1016/j.actamat.2018.04.035 ↗
37. Deformation-induced ω phase in modified Ti–29Nb–13Ta–4.6 Zr alloy by Cr addition10.1016/j.actbio.2013.04.032 ↗
38. On the compressive deformation behavior of new beta titanium alloys designed by d-electron method10.1016/j.jallcom.2018.02.212 ↗
39. 1.3 - The molecular orbital approach and its application to biomedical titanium alloy design
40. A new look at biomedical Ti-based shape memory alloys10.1016/j.actbio.2012.01.018 ↗
41. Laves phase precipitation in Ti-Zr-Fe-Cr alloys with high strength and large plasticity10.1016/j.matdes.2018.05.035 ↗
42. Influence of Nb on the β → α″martensitic phase transformation and properties of the newly designed Ti–Fe–Nb alloys10.1016/j.msec.2015.11.072 ↗
43. Chakrabarty · 2000
44. A β-titanium alloy with extra high strain-hardening rate: design and mechanical properties10.1016/j.scriptamat.2015.11.020 ↗
45. The effect of the solute on the structure, selected mechanical properties, and biocompatibility of Ti–Zr system alloys for dental applications10.1016/j.msec.2013.09.032 ↗
46. Development of a new β Ti alloy with low modulus and favorable plasticity for implant material10.1016/j.msec.2015.12.076 ↗
47. Effects of Ta content on Young's modulus and tensile properties of binary Ti–Ta alloys for biomedical applications10.1016/j.msea.2003.12.011 ↗
48. Effects of molybdenum content on the structure and mechanical properties of as-cast Ti–10Zr-based alloys for biomedical applications10.1016/j.msec.2011.12.003 ↗
49. Structure and properties of Ti–7.5Mo–xFe alloys10.1016/S0142-9612(01)00233-2 ↗
50. Phase constitution and mechanical properties of Ti-(Cr, Mn)-Sn biomedical alloys10.4028/www.scientific.net/MSF.654-656.2118 ↗
51. TiZrNbTaMo high-entropy alloy designed for orthopedic implants: as-cast microstructure and mechanical properties10.1016/j.msec.2016.12.057 ↗
52. High strength Ti–Fe–Sn ultrafine composites with large plasticity10.1016/j.scriptamat.2007.03.031 ↗
53. General relationship between strength and hardness10.1016/j.msea.2011.08.061 ↗
54. Development of strength-hardness relationships in additively manufactured titanium alloys10.1016/j.msea.2017.03.102 ↗
55. Improved deformation behavior in Ti-Zr-Fe-Mn alloys comprising the C14 type laves and β phases10.1016/j.matdes.2018.10.049 ↗
56. Evolution of deformation mechanisms of Ti–22.4 Nb–0.73 Ta–2Zr–1.34O alloy during straining10.1016/j.actamat.2010.01.015 ↗
57. ω phase acts as a switch between dislocation channeling and joint twinning- and transformation-induced plasticity in a metastable β titanium alloy10.1016/j.actamat.2018.03.053 ↗
58. Dislocation and twin substructure evolution during strain hardening of an Fe–22 wt% Mn–0.6 wt% C TWIP steel observed by electron channeling contrast imaging10.1016/j.actamat.2011.07.009 ↗
59. Chawla · 1999
60. Super-elastic titanium alloy with unstable plastic deformation10.1063/1.2037192 ↗
61. On the mechanism of {332} twinning in metastable β titanium alloys10.1016/j.actamat.2016.03.040 ↗
62. Hardness and plastic deformation in a bulk metallic glass10.1016/j.actamat.2004.10.023 ↗
63. Phase stability and stress-induced transformations in beta titanium alloys10.1007/s11837-015-1411-y ↗
64. Shear bands in metallic glasses10.1016/j.mser.2013.04.001 ↗
65. Evolution of microstructure and shear-band formation in α-hcp titanium10.1016/0167-6636(94)90058-2 ↗
66. Effects of microstructure on the adiabatic shearing behaviors of titanium alloy10.1016/j.msea.2010.12.068 ↗