Aging precipitation and corrosion resistance of peripheral coarse grained layer and matrix in Al-7.2Zn-1.9Mg-2Cu extruded profiles under multi-stage aging treatments
Source abstract
Abstract
Peripheral coarse-grained (PCG) layers are frequently formed in solution-treated Al-Zn-Mg-Cu alloy profiles, but the distinct aging responses of PCGs and fine matrix grains (FGs) and their effects on corrosion resistance and mechanical properties remain unclear. In this study, the correlation between microstructure and properties was investigated under five aging regimes using TEM, quasi-in-situ tensile testing, quasi-in-situ EBSD, and intergranular corrosion (IGC) tests. The results reveal that IGC susceptibility is governed by precipitates, with grain morphology playing a secondary but non-negligible role. Under peak aging, coarse-grained specimens show lower corrosion resistance due to the greater continuity of grain-boundary precipitates, whereas in the over-aged state they exhibit improved resistance owing to enlarged precipitate spacing. The fine-grained specimen under natural aging exhibits the poorest corrosion resistance. Mechanical properties are mainly controlled by precipitate size and the corresponding dislocation-precipitate interaction. Fine η’ precipitates promote dislocation shearing and strain localization, causing early cleavage in coarse grains, whereas coarsened η precipitates after retrogression and re-aging treatment favor bypassing and multi-slip activation, improving deformation homogeneity and elongation. Among the investigated treatments, the triple-aging regime at 100 °C/6h + 130 °C/12 h + 170 °C/2h achieves the best strength-corrosion synergy by suppressing excessive precipitate coarsening.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (69)
Show source-provided references
1. Effects of Cu concentration on microstructure and tensile properties of high-Zn-content Al-Zn-Mg-Cu alloys10.1016/j.jallcom.2024.174208 ↗
2. Microstructure, mechanical properties, and strengthening mechanisms of ultra-high strength Al-Zn-Mg-Cu alloy prepared by continuous extrusion forming process10.1016/j.matdes.2024.112985 ↗
3. Evolution of precipitate and precipitate/matrix interface in Al-Zn-Mg-Cu (-Ag) alloys10.1016/j.jmst.2022.07.049 ↗
4. Investigation on precipitate behavior and mechanical properties of Al-Zn-Mg-Cu alloys with various Zn/Mg ratios10.1016/j.jmrt.2024.10.237 ↗
5. Effect of Cu content on intergranular corrosion and exfoliation corrosion susceptibility of Al-Zn-Mg-(Cu) alloys10.1016/S1003-6326(23)66236-3 ↗
6. Effect of intermittent non-isothermal aging on the microstructure and properties of Al-Zn-Mg-Cu alloy10.1016/j.matchemphys.2024.129946 ↗
7. Application of friction stir surface treatment for modification of peripheral coarse grain structure and mechanical properties of AZ31 Mg alloy10.1016/j.jmrt.2024.04.241 ↗
8. Application of physical and numerical simulations for interpretation of peripheral coarse grain structure during hot extrusion of AA7020 aluminum alloy10.1016/j.jallcom.2017.06.297 ↗
9. Effect of grain size on the fatigue crack growth behavior of 2524-T3 aluminum alloy10.1016/j.acme.2016.01.004 ↗
10. Aging behavior and precipitate characterization of a high Zn-containing Al-Zn-Mg-Cu alloy with various tempers10.1016/j.matdes.2016.03.150 ↗
11. Achieving high performance by optimized heat treatment in a spray formed Al-Zn-Mg-Cu alloy
12. Enhancing intergranular corrosion resistance of 7055 Al alloy by ultrasonic shot peening
13. The effect of initial alloy temper on corrosion resistance for Al-Zn-Mg-Cu alloy10.1016/j.corsci.2022.110730 ↗
14. W. Zhao, D. Wang, X. Dong, H.-L. Jia, Y.-J. Yang, J. Xu, X. Wang, M. Zha, H.-Y. Wang, Exploring the corrosion behavior of bimodal-grained structured Mg-2.5Zn-0.2Ce alloy with a high strength-ductility synergy, (2025). https://doi.org/10.2139/ssrn.5193436.10.2139/ssrn.5193436 ↗
15. Effect of intermetallic phases and recrystallization on the corrosion and fracture behavior of an Al-Zn-Mg-Cu-Zr-Yb-Cr alloy
16. New insights into intergranular corrosion mechanism of high-strength Al-Zn-Mg-Cu alloys10.1016/j.corsci.2025.113364 ↗
17. Influence of grain boundary precipitates on intergranular corrosion behavior of 7050 Al alloys10.3390/coatings12020249 ↗
18. Controllable precipitation behavior near grain boundaries enabled by artificial strain concentration in age-hardening aluminum alloys
19. Enhanced corrosion performance by controlling grain boundary precipitates in a novel crossover Al-Cu-Zn-Mg alloy by optimizing zn content10.1016/j.matchar.2023.113615 ↗
20. Effect of gradient grain structures on corrosion resistance of extruded Al-Zn-Mg-Cu alloy10.1016/j.jallcom.2020.154911 ↗
21. Reversion and re-aging of a peak aged Al-Zn-Mg-Cu alloy10.1016/j.scriptamat.2020.07.049 ↗
22. Effects of pre-strain on the surface residual stress and corrosion behavior of an Al-Zn-Mg-Cu alloy plate10.1016/j.matchar.2020.110129 ↗
23. Enhancing the corrosion resistance of high-strength Al-Zn-Mg-Cu alloys after equal channel angular pressing by developing retrogression and re-aging strategies10.1016/j.corsci.2025.112736 ↗
24. Precipitate evolution and properties of an Al-Zn-Mg-Cu alloy processed by thermomechanical treatment10.1016/j.msea.2023.144716 ↗
25. Simultaneously enhanced mechanical strength and inter-granular corrosion resistance in high strength 7075 al alloy10.1016/j.jallcom.2018.12.024 ↗
26. The effect of multi-stage aging treatment on the microstructure and properties of 7075 aluminum alloy10.1016/j.jallcom.2025.181143 ↗
27. Effect of heat treatment on microstructure, mechanical properties and corrosion resistance of 7075 aluminum alloys fabricated by improved friction stir additive manufacturing10.1016/j.jallcom.2024.176512 ↗
28. Corrosion behaviour of AA6082 Al-Mg-Si alloy extrusion: recrystallized and non-recrystallized structures10.1016/j.corsci.2018.08.047 ↗
29. Effect of grain size on corrosion of high purity aluminium10.1016/j.electacta.2010.09.023 ↗
30. Intergranular corrosion behavior of the 7075-T6 aluminum alloy under different annealing conditions10.1016/j.matchemphys.2011.01.010 ↗
31. Effect of intermediate-temperature severe plastic deformation on microstructure evolution, mechanical properties and corrosion behavior of an Al-Zn-Mg-Cu alloy10.1016/j.matchar.2023.113248 ↗
32. Pitting corrosion of naturally aged AA 7075 aluminum alloys with bimodal grain size10.1016/j.corsci.2016.09.013 ↗
33. Preparation of bimodal grain size 7075 aviation aluminum alloys and their corrosion properties10.1016/j.cja.2017.06.001 ↗
34. Intergranular corrosion behavior and mechanical properties of Al-Mg-Si alloy profiles: the effect of peripheral coarse grain thickness10.1007/s11665-025-11328-w ↗
35. Formation mechanism of peripheral coarse grains in 2195 Al-Li alloy plate and its influence on static and dynamic corrosion resistance10.1016/j.jallcom.2025.181567 ↗
36. Microstructural and mechanical properties of precipitation-strengthened Al-Mg-Zr-Sc-Er-Y-Si alloys10.1016/j.actamat.2023.119167 ↗
37. Formation and evolution mechanisms of the peripheral coarse-grain layer in Al-Zn-Mg-Cu alloy extrusion profile: synergistic effects of strain, stored energy, and grain boundary10.1016/j.jmst.2025.07.025 ↗
38. Kinetics study of hydration reaction between aluminum powder and water based on an improved multi-stage shrinking core model10.1016/j.ijhydene.2021.07.191 ↗
39. Crevice–galvanic coupling corrosion behavior and mechanism of QC-10 aluminum alloy in chloride-containing solutions10.1016/j.jmst.2024.12.028 ↗
40. Electrochemical impedance spectroscopy as a tool to obtain mechanistic information on the passive behaviour of aluminium10.1016/0013-4686(95)00462-9 ↗
41. Synergistic effect of 3-amino-1,2,4-triazole-5-thiol and cerium chloride on corrosion inhibition of AA2024-T310.1149/2.0621906jes ↗
42. Optimization of tribological properties and corrosion resistance of MAO coatings on LY12 aluminum alloy by co-doping with graphite particles and in situ formation of zinc phosphate10.1016/j.ceramint.2024.08.443 ↗
43. Effect of bypass coupling current on corrosion resistance of twin-wire indirect arc surfacing layer10.1016/j.corsci.2020.108817 ↗
44. Electrochemical noise analysis of corrosion sensitivity of pb-free solders in 5 wt% citric acid solution10.1007/s42114-024-00856-z ↗
45. Synergistic effect of crevice corrosion and galvanic coupling on 304 SS fasteners degradation in chloride environments10.1038/s41529-023-00327-8 ↗
46. Accurate electrochemical measurement of magnesium corrosion rates; a combined impedance, mass-loss and hydrogen collection study10.1016/j.electacta.2013.12.124 ↗
47. The dislocation dynamics study and machine learning approach of the critical stress for dislocation shearing and bypassing precipitates
48. Mechanical properties of Al(Sc,Zr) alloys at ambient and elevated temperatures10.1016/S1359-6454(03)00320-3 ↗
49. Precipitation Strengthening Model of AA 7055 Aluminium Alloy
50. Transmission electron microscopy investigation of separated nucleation and in-situ nucleation in AA7050 aluminium alloy10.1016/j.actamat.2018.02.045 ↗
51. Effect of hot extrusion, novel stepwise-rolling, and heat treatment on microstructure, mechanical properties, and precipitate chemistry of ultra-high strength Al-Zn-Mg-Cu alloy10.1016/j.jallcom.2024.177910 ↗
52. Aging-driven optimization of precipitate phases: enhancing mechanical strength and corrosion resistance in 7075 aluminum alloy10.1016/j.jallcom.2025.182093 ↗
53. Revealing the mechanisms of exfoliation corrosion and stress corrosion cracking for an Al-Zn-Mg-Cu alloy after continuous retrogression and re-ageing treatment10.1016/j.corsci.2024.112474 ↗
54. Effects of secondary phase and coarse grain defects on mechanical behavior of near-equiatomic Al alloy during extrusion at different temperatures and speeds10.1016/j.jmrt.2025.02.186 ↗
55. Effect of thermo-mechanical processing on quench-induced precipitates morphology and mechanical properties in high strength AA7075 aluminum alloy10.1016/j.matchar.2021.111026 ↗
56. Study on the slip mechanism of ultra-low temperature compressive deformation of Al-Mg-Si alloys10.1016/j.jallcom.2025.179463 ↗
57. Deformation mechanisms of Al alloys containing shearable/non-shearable L12 precipitates: a comparative study under varied slip system activations10.1016/j.actamat.2025.121607 ↗
58. The influence of precipitation on plastic deformation in a high mg-containing AlMgZn-based crossover alloy: Slip localization and strain hardening10.1016/j.ijplas.2024.103896 ↗
59. Multi slip activation enabled excellent low-temperature strength-ductility synergy in Al–Cu–Li alloy10.1016/j.vacuum.2022.111328 ↗
60. Healing the high-temperature-retrogression-caused wide precipitation-free zones in Al-Zn-Mg-Cu alloy via strain-aging induced precipitates10.1016/j.msea.2024.147398 ↗
61. Compatibility of deformation in two-phase Ti-Al alloys: dependence on microstructure and orientation relationships10.1007/BF02670762 ↗
62. Combining equal-channel angular pressing and heat treatment to obtain enhanced corrosion resistance in 6061 aluminum alloy10.1016/j.jallcom.2015.05.177 ↗
63. Grain structure-dislocation synergy governing precipitation and corrosion behaviors in high strength Al-Zn-Mg-Cu alloys10.1016/j.electacta.2025.146956 ↗
64. In-situ investigation of slip system activation, intergranular plasticity transfer, and deformation heterogeneity of Al-Zn-Mg-Cu alloy10.1016/j.msea.2024.147604 ↗
65. Grain boundary and twin boundary solute segregations in nanocrystalline Al-Mg alloy10.1016/j.scriptamat.2024.116053 ↗
66. Effect of cooling rate on the composition and chemical heterogeneity of quench-induced grain boundary η-phase precipitates in 7xxx aluminium alloys10.1016/j.actamat.2023.119443 ↗
67. Effect of cooling rate on the heterogeneity of grain boundary η-phase precipitates in 7xxx aluminium alloys following artificial ageing10.1007/s11661-025-07866-6 ↗
68. Mechanism and optimization for the effect of solid solution treatment on microstructure and properties of recycled 7050-T7451 plate10.1016/j.jmrt.2024.07.027 ↗
69. Heat treatment of 7xxx series aluminium alloys—some recent developments10.1016/S1003-6326(14)63306-9 ↗