Effect of intermetallics on the microstructure and tensile properties of aluminum based alloys: Role of Sr, Mg and Be addition
Source abstract
Abstract
Abstract The present work was performed on B357 alloy containing Mg, Fe, Be and Sr. The molten metal was cast in a metallic mold (ASTM B-108). The Mg level of the alloy was increased by adding pure Mg to the alloy melts to obtain Mg levels of 0.4 wt.%, 0.6 wt.% and 0.8 wt.%. Iron and Be were added in the form of Al–25%Fe and Al–5%Be master alloys, respectively, to obtain Fe levels of 0.09 wt.%, 0.2 wt.% and 0.6 wt.% and a Be level of 0.05 wt.%. The beryllium–iron phase is observed to occur in script-like form inside primary α-Al dendrites and close to Fe phases. Increasing both Mg and Fe levels in the alloy increases the amount of the π-Al 8 FeMg 3 Si 6 phase formed. In solution heat-treated alloys, the β-phase platelets are observed to undergo changes in their morphology due to the dissolution, thinning, necking, and fragmentation of these platelets with an increase in solutionizing time. The π-phase is observed to dissolve and/or transform into a cluster of very fine β-Al 5 FeSi phase platelets. Beryllium addition results in a nodular form of the β-phase which decreases the harmful effects of these particles on the mechanical properties. Quality index values increase with an increase in solution heat treatment time, from 5 to 12 h. Raising the Mg content leads to an increase in tensile parameters. Raising the Fe levels, however, leads to a drastic decrease in properties. For the same levels of Fe and/or Mg, Be and Sr help to improve the alloy mechanical properties. This is more prominent in alloys containing low levels of Fe with high levels of Mg.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. ASM Handbook
2. Properties and Selection: Nonferrous ALLOYS and Special-purpose Materials
3. Magnesium effects on the microstructure of unmodified and modified Al–Si alloys10.1080/09534962.1991.11819058 ↗
4. Magnesium effect on the strength of A380.0 and 383.0 aluminum die casting alloys
5. Light alloys metallurgy of light metals
6. King · 1987 · 112
7. The ambient and high temperature deformation behavior of Al–Si–Cu–Mg alloy with minor Ti, Zr, Ni additions10.1016/j.matdes.2014.01.041 ↗
8. Hatch · 1984 · 50
9. Interpretation of tensile results by means of quality index and probable yield strength
10. Metallurgical parameters controlling the microstructure and hardness of Al–Si–Cu–Mg base alloys10.1016/j.matdes.2010.11.040 ↗
11. Elsharkawi · 2011
12. Effect of Mg and Sr additions on the formation of intermetallics in Al-6 Wt Pet Si-3.5 Wt Pet Cu-(0.45) to (0.8) Wt Pet Fe 319-type alloys10.1007/s11661-998-0194-y ↗
13. Influence of Mg content on the microstructure and solid solution chemistry of Al–7Si–Mg casting alloys during solution treatment10.4028/www.scientific.net/MSF.331-337.277 ↗
14. Non-Equilibrium Crystallization of AlFeSi Compound in Melt Superheated Al-Si Alloy Castings
15. Apelian · 2005
16. Dissolution of iron intermetallics in Al–Si alloys through nonequilibrium heat treatment10.1007/BF02670687 ↗
17. Effect of solution treatment on intermetallic phases morphology in AlSi9Cu3 cast alloy
18. Structure and properties of hypoeutectic Al–Si–Mg alloys modified with pure strontium10.1007/BF02643389 ↗
19. Solution treatment effects in Al–Si–Mg casting alloys: part II: solid solution chemistry
20. Solidification and precipitation behaviour of Al–Si–Mg casting alloys10.1023/A:1004801327556 ↗
21. The influence of Fe and Cr on the microstructure of cast Al–Si–Mg alloys10.1007/BF02644441 ↗
22. Ammar · 2010
23. The relationship between fracture toughness and tensile properties of AB357 cast aluminum alloy10.1007/s11661-008-9742-8 ↗
24. Empirical models of mechanical behaviour of Al–Si–Mg cast alloys for high performance engine applications
25. Modeling the T6 heat treatment of Al–Mg–Si alloy by artificial neural network
26. Influence of heat treatment processing parameters on the hardness and the microstructure of semi-solid aluminum alloy AB356
27. Prediction of mechanical properties of the heat treatment by artificial neural networks
28. Influence of aging parameters on the tensile properties and quality index of Al-9 Pct Si-1.8 Pct Cu-0.5 Pct Mg 354-type casting alloys10.1007/s11661-011-0808-7 ↗
29. Influence of beryllium and rare earth additions on ignition-proof magnesium alloys10.1016/S0924-0136(00)00854-2 ↗
30. Sintered magnesium and magnesium–beryllium alloys
31. Effect of the trace additions (Be, Cr, Mn and Co) on the mechanical properties and fracture toughness of Fe-containing Al–7Si–0.3Mg alloy10.1080/09534962.1994.11819149 ↗
32. Hansen · 1958
33. Effects of Mg, Fe, Be additions and solution heat treatment on the π-AlMgFeSi iron intermetallic phase in Al–7Si–Mg alloys10.1007/s10853-009-4118-z ↗
34. Effects of beryllium in Al–Si–Mg–Ti alloy10.1016/S0921-5093(99)00677-2 ↗
35. Effect of iron and combined iron and beryllium addition on the fracture toughness and microstructures of squeeze-cast Al–7Si–0.3Mg alloy10.1007/BF02648843 ↗
36. Ammar · 2012
37. Correlations among microstructure, effect of thermal exposure and mechanical properties
38. Microstructural characteristics of Sr and Na modified Al–Mg–Si alloy
39. Sigworth · 2011 · 1
40. Effect of solution heat treatment and additives on the hardness, tensile properties and fracture behaviour of Al–Si (A413.1) automotive alloys10.1023/A:1027385619114 ↗
41. The role of alloying additives and aging treatment on the impact behavior of 319 cast alloy10.1016/j.matdes.2011.02.047 ↗
42. Paz · 2003
43. Precipitation hardening of Al–Si–Mg alloys
44. Effect of aging temperature on the mechanical properties of Al–6Si–0.5Mg cast alloys with Cu additions treated by T6 heat treatment
45. Influence of fluidized sand bed heat treatment on the performance of Al–Si cast alloys10.1016/j.matdes.2010.10.023 ↗
46. Mechanism for linear and non-linear optical effects in SeBe3O4 crystal10.1063/1.1490335 ↗
47. The Be-Mg (Beryllium-Magnesium) System10.1007/BF02868899 ↗
48. Reviews on the influences of alloying elements on the microstructure and mechanical properties of aluminum alloys and aluminum alloy composites