Design of interfacial Cr3C2 carbide layer via optimization of sintering parameters used to fabricate copper/diamond composites for thermal management applications
Source abstract
Abstract
Abstract To produce metal-diamond composite materials with high thermal conductivity, it is important for a high-quality carbide interface to exist between the metal matrix and diamond. The addition of carbide-forming elements to the matrix positively influences the interfacial thermal conductance (ITC), and is an effective method for improving the bulk thermal conductivity of composite materials. Diamond powder was mixed with Cu0.65Cr alloy powder, using a 1:1 volume ratio. The pulse plasma sintering (PPS) parameters were optimized to control the carbide interface between the diamond and matrix. The microstructures and phase compositions of the fabricated materials were examined using scanning electron microscopy (SEM) and X-ray diffraction (XRD). The interfacial layer was characterized using SEM and focused ion beam (FIB) techniques. The residual Cr content of the matrix was estimated, to determine its influence on the thermal properties of the matrix. To calculate the ITC, differential effective medium (DEM) and Hasselman-Johnson (H–J) models were used. The highest thermal conductivity of 687 W m− 1 K− 1 was achieved by a composite material that was fabricated at 850 °C over a period of 10 min, which had an 81-nm-thick interfacial carbide layer. An ITCDEM value of 5·107 W m− 2 K− 1 was obtained.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Diamond and Carbon-based Materials Research · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (80)
Show source-provided references
1. Effect of rhenium addition on the strengthening of chromium–alumina composite materials10.3139/146.111002 ↗
2. The Influence of Al2O3 Powder Morphology on the Properties of Cu-Al2O3 Composites Designed for Functionally Graded Materials (FGM)10.1007/s11665-016-2204-3 ↗
3. Mechanical properties of a diamond–copper composite with high thermal conductivity10.1016/j.matdes.2015.08.048 ↗
4. Evolution of material properties during the sintering process of Cr-Re-Al2O3 composites10.1016/j.compositesb.2016.04.065 ↗
5. Advances in Composite Materials for Thermal Management in Electronic Packaging
6. The measurement of thermal properties of diamond10.1016/S0925-9635(96)00772-8 ↗
7. Thermal properties of diamond/copper composite material10.1016/S0026-2714(03)00215-4 ↗
8. Thermal conductivity of diamond composites sintered under high pressures10.1016/j.diamond.2007.12.051 ↗
9. Selective interfacial bonding in Al(Si)–diamond composites and its effect on thermal conductivity10.1016/j.compscitech.2006.03.016 ↗
10. The effect of intense plasma pulse pre-treatment on wettability in ceramic–copper system10.1016/j.fusengdes.2007.08.010 ↗
11. Interfacial characteristic and thermal conductivity of Al/diamond composites produced by gas pressure infiltration in a nitrogen atmosphere10.1016/j.matdes.2015.12.098 ↗
12. Alloy development for highly conductive thermal management materials using copper-diamond composites fabricated by field assisted sintering technology10.1007/s10853-012-6868-2 ↗
13. Hugh · 1992
14. On the influence of active element content on the thermal conductivity and thermal expansion of Cu–X (X=Cr, B) diamond composites10.1016/j.scriptamat.2007.08.007 ↗
15. On the thermal conductivity of Cu–Zr/diamond composites10.1016/j.matdes.2012.09.006 ↗
16. High thermal conductivity through interfacial layer optimization in diamond particles dispersed Zr-alloyed Cu matrix composites10.1016/j.scriptamat.2015.07.022 ↗
17. Effects of boron on the microstructure and thermal properties of Cu/diamond composites prepared by pressure infiltration10.1007/s12613-011-0465-2 ↗
18. On critical aspects of infiltrated Al/diamond composites for thermal management: Diamond quality versus processing conditions10.1016/j.compositesa.2014.08.015 ↗
19. Fabrication of diamond/aluminum composites by vacuum hot pressing: Process optimization and thermal properties10.1016/j.compositesb.2012.11.014 ↗
20. Effect of metalloid silicon addition on densification, microstructure and thermal-physical properties of Al/diamond composites consolidated by spark plasma sintering10.1016/j.matdes.2014.06.065 ↗
21. Interfacial design of Cu-based composites prepared by powder metallurgy for heat sink applications10.1016/j.msea.2006.12.146 ↗
22. Influence of interfacial carbide layer characteristics on thermal properties of copper–diamond composites10.1007/s10853-012-6878-0 ↗
23. High thermal conductive diamond/Cu–Ti composites fabricated by pressureless sintering technique
24. High thermal conductivity composites consisting of diamond filler with tungsten coating and copper (silver) matrix10.1007/s10853-010-4938-x ↗
25. Preparation of copper–diamond composites with chromium carbide coatings on diamond particles for heat sink applications10.1016/j.applthermaleng.2013.05.038 ↗
26. Architecting boron nanostructure on the diamond particle surface10.1016/j.apsusc.2013.12.052 ↗
27. Microstructure and Thermoelectric Properties of Bulk Cobalt Antimonide (CoSb3) Skutterudites Obtained by Pulse Plasma Sintering10.1007/s11664-015-4037-5 ↗
28. Effect of coating on the microstructure and thermal conductivities of diamond–Cu composites prepared by powder metallurgy10.1016/j.compscitech.2011.06.012 ↗
29. Enhanced thermal conductivity in diamond/aluminum composites: Comparison between the methods of adding Ti into Al matrix and coating Ti onto diamond surface10.1016/j.surfcoat.2012.11.070 ↗
30. Thermal conductivity enhancement in Cu/diamond composites with surface-roughened diamonds10.1007/s00339-013-8117-1 ↗
31. Enhanced thermal conductivity in diamond/aluminum composites with a tungsten interface nanolayer10.1016/j.matdes.2012.11.061 ↗
32. Thermal conductivity of Cu/diamond composites prepared by a new pretreatment of diamond powder10.1016/j.compositesb.2013.04.017 ↗
33. Diamond–tungsten based coating–copper composites with high thermal conductivity produced by Pulse Plasma Sintering10.1016/j.matdes.2015.03.056 ↗
34. Chawla · 2012
35. Thermal conductivity enhancement of copper–diamond composites by sintering with chromium additive10.1007/s10973-013-3604-3 ↗
36. Physicochemical interaction and structure development during the formation of metal gas-transport coatings on diamond (review). II. Kinetics
37. Thermodynamic and kinetic study on interfacial reaction and diamond graphitization of Cu—Fe-based diamond composite10.1088/1674-1056/22/1/018102 ↗
38. Numerical investigation of the effect of interfacial thermal resistance upon the thermal conductivity of copper/diamond composites10.1016/j.matdes.2015.07.059 ↗
39. ASM International Handbook Committee · 1990
40. Pierson · 1996
41. Maxwell · 1954 · Vol. 1
42. Effect of processing parameters on the microstructure and thermal conductivity of diamond/Ag composites fabricated by spark plasma sintering10.1007/s12598-010-0182-4 ↗
43. Diamond-based metal matrix composites for thermal management made by liquid metal infiltration - Potential and limits10.4028/www.scientific.net/AMR.59.111 ↗
44. Assessing predictive schemes for thermal conductivity against diamond-reinforced silver matrix composites at intermediate phase contrast10.1016/j.scriptamat.2006.11.008 ↗
45. Effects of Ti addition on thermal properties of diamond/Ag–Ti composites fabricated by liquid sintering10.1016/j.matlet.2013.11.001 ↗
46. Optimizing thermal conductivity in gas-pressure infiltrated aluminum/diamond composites by precise processing control10.1016/j.compositesa.2012.12.010 ↗
47. Design of composites for thermal management: Aluminum reinforced with diamond-containing bimodal particle mixtures10.1016/j.compositesa.2014.12.006 ↗
48. Surface modification of diamonds in diamond/Al-matrix composite10.4028/www.scientific.net/AMR.59.125 ↗
49. Finite element simulation and experimental investigation on thermal conductivity of diamond/aluminium composites with imperfect interface10.1016/j.commatsci.2013.11.059 ↗
50. High thermal-conductivity diamond/Al composites fabricated by spark plasma sintering
51. Fabrication of diamond particles reinforced Al-matrix composites by hot-press sintering10.1016/j.ijrmhm.2013.02.007 ↗
52. Thermal conductivity of diamond particle dispersed aluminum matrix composites fabricated in solid–liquid co-existent state by SPS10.1016/j.compositesb.2011.03.028 ↗
53. Interface formation in infiltrated Al(Si)/diamond composites10.1016/j.diamond.2005.09.036 ↗
54. Effect of sintering parameters on the microstructure and thermal conductivity of diamond/Cu composites prepared by high pressure and high temperature infiltration10.1007/s12613-013-0711-x ↗
55. Preparation of high thermal conductivity copper–diamond composites using molybdenum carbide-coated diamond particles10.1007/s10853-013-7409-3 ↗
56. Effect of molybdenum carbide intermediate layers on thermal properties of copper–diamond composites10.1016/j.jallcom.2013.04.121 ↗
57. Improved Thermal Performance of Diamond-Copper Composites with Boron Carbide Coating10.1007/s11665-013-0780-z ↗
58. Low-temperature densification of diamond/Cu composite prepared from dual-layer coated diamond particles10.1007/s10854-014-2381-5 ↗
59. Thermal Diffusion Coating of Diamonds for Improved and Reliable Thermal Properties of Metal Diamond Composites
60. Si-Coated Diamond Particles Reinforced Copper Composites Fabricated by Spark Plasma Sintering Process10.1080/10426914.2012.746789 ↗
61. Thermal conductivity of SPS consolidated Cu/diamond composites with Cr-coated diamond particles10.1016/j.jallcom.2009.10.040 ↗
62. Guillemet · 2012
63. Selective interfacial bonding and thermal conductivity of diamond/Cu-alloy composites prepared by HPHT technique10.1007/s12613-012-0565-7 ↗
64. Effect of boron addition on interface microstructure and thermal conductivity of Cu/diamond composites produced by high temperature-high pressure method10.1002/pssa.201330237 ↗
65. High thermal conductive diamond/Cu–Ti composites fabricated by pressureless sintering technique10.1016/j.applthermaleng.2013.11.065 ↗
66. Effect of diamond surface orientation on the thermal boundary conductance between diamond and aluminum10.1016/j.diamond.2013.06.017 ↗
67. Thermal boundary conductance between refractory metal carbides and diamond10.1016/j.actamat.2014.04.024 ↗
68. The measurement of the adhesion force between ceramic particles and metal matrix in ceramic reinforced-metal matrix composites10.1016/j.compositesa.2015.05.025 ↗
69. Thermal boundary resistance10.1103/RevModPhys.61.605 ↗
70. Modeling the thermal conductivity of diamond reinforced aluminium matrix composites with inhomogeneous interfacial conductance10.1016/j.matdes.2009.04.019 ↗
71. Heat and Mass Transfer
72. Interfacial characterization of Cu/diamond composites prepared by powder metallurgy for heat sink applications10.1016/j.scriptamat.2007.10.011 ↗
73. Synthesis and characterization of the diamond/copper composites produced by the pulse plasma sintering (PPS) method10.1016/j.diamond.2012.05.008 ↗
74. Interfacial microstructure of copper/diamond composites fabricated via a powder metallurgical route10.1016/j.matchar.2014.11.032 ↗
75. M.J. Kruszewski, Ł. Ciupiński, K.J. Kurzydłowski, Copper powder and diamond mixture for producing composite material, comprises copper powder and diamond powder and isopropyl alcohol powder as additive to prevent segregation of components, Patent number: PL403558-A1, 2013.
76. https://www.kupferinstitut.de/en/materials/material-properties/low-alloy-copper-materials.html, (n.d.).
77. Elastic and thermal properties of Zr2Al3C4: Experimental investigations and ab initio calculations10.1063/1.2773679 ↗
78. Atomistic deformation modes and intrinsic brittleness of Al4SiC4: A first-principles investigation10.1103/PhysRevB.74.174112 ↗
79. Elastic and thermodynamic properties of Mo2C polymorphs from first principles calculations10.1016/j.ceramint.2014.10.167 ↗
80. Low-Temperature Elastic Properties of ZrC and TiC10.1063/1.1707923 ↗