Effects of the morphology of grain boundary α-phase on the anisotropic deformation behaviors of additive manufactured Ti–6Al–4V
Source abstract
Abstract
Grain boundary α-phase (GB-α) in titanium alloys is the vulnerable site for failure, while the correlation between deformation behavior and local dislocation motion is still ambiguous. In this study, we made a detailed investigation into the deformation behavior of GB-α with different morphologies in a laser powder bed fusion (LPBF) fabricated Ti-6Al-4V (Ti-64) by using in-situ and interrupted tensile testing, and discussed the underlying mechanisms of dislocation motion. The deformation-induced dislocations were found severely accumulated within the continuous GB-α with the transverse loading direction, which corresponds to the strain localization, while uniformly distributed between the continuous GB-α and surrounding grains with the perpendicular tensile loading. In contrast, discontinuous GB-α could fully accommodate uniform deformation with the matrix microstructure under both loading directions. The new understanding of dislocation motions in GB-α provides a novel perspective to effectively eliminate the tensile property anisotropy with the columnar microstructure present in LPBF Ti-64.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Titanium Alloys Microstructure and Properties · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Additive manufacturing of metallic components – Process, structure and properties10.1016/j.pmatsci.2017.10.001 ↗
2. Effects of defects on mechanical properties in metal additive manufacturing: A review focusing on X-ray tomography insights10.1016/j.matdes.2019.108385 ↗
3. Material-structure-performance integrated laser-metal additive manufacturing10.1126/science.abg1487 ↗
4. In situ tailoring microstructure in additively manufactured Ti-6Al-4V for superior mechanical performance10.1016/j.actamat.2016.12.027 ↗
5. Micro-and meso-structures and their influence on mechanical properties of selectively laser melted Ti-6Al-4V10.1016/j.actamat.2018.05.044 ↗
6. Effect of build geometry on the β-grain structure and texture in additive manufacture of Ti6Al4V by selective electron beam melting10.1016/j.matchar.2013.07.012 ↗
7. Grain structure control during metal 3D printing by high-intensity ultrasound10.1038/s41467-019-13874-z ↗
8. The anisotropy of laser melting deposition additive manufacturing Ti-6.5Al-3.5Mo-1.5Zr-0.3Si titanium alloy10.1016/j.matdes.2014.11.001 ↗
9. Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: A critical review10.1016/j.matdes.2017.11.021 ↗
10. Influence of continuous grain boundary α on ductility of laser melting deposited titanium alloys10.1016/j.msea.2016.03.034 ↗
11. Graded microstructure and mechanical properties of additive manufactured Ti-6Al-4V via electron beam melting10.1016/j.actamat.2015.06.036 ↗
12. Near-threshold fatigue crack growth rates of laser powder bed fusion produced Ti-Aal-4V10.1016/j.actamat.2020.07.049 ↗
13. G. Lutjering, J.C. Williams, Titanium, Springer Berlin Heidelberg, Berlin, Heidelberg, 2007. https://doi.org/10.1007/978-3-540-73036-1.10.1007/978-3-540-73036-1 ↗
14. Variant selection of grain boundary α by special prior β grain boundaries in titanium alloys10.1016/j.actamat.2014.05.003 ↗
15. Effect of Grain Boundary Alpha on Mechanical Properties of Ti5.4Al3Mo1V Alloy10.1007/s11837-015-1443-3 ↗
16. Precipitation of grain boundary α in a laser deposited compositionally graded Ti-8Al-xV alloy - An orientation microscopy study10.1016/j.actamat.2003.09.038 ↗
17. Microstructural effects on the mechanical behavior of B-modified Ti-6Al-4V alloys10.1016/j.actamat.2007.05.009 ↗
18. Experimental assessment of variant selection rules for grain boundary α in titanium alloys10.1016/j.actamat.2015.09.021 ↗
19. Effects of processing parameters on microstructure and mechanical property of selective laser melted Ti6Al4V10.1016/j.matdes.2011.09.051 ↗
20. High cycle fatigue in selective laser melted Ti-6Al-4V10.1016/j.actamat.2020.05.041 ↗
21. Selective laser melting produced Ti-6Al-4V: Post-process heat treatments to achieve superior tensile properties10.3390/ma11010146 ↗
22. Microstructure and tensile properties of additive manufactured Ti-6Al-4V with refined prior-β grain structure obtained by rapid heat treatment10.1016/j.msea.2021.141271 ↗
23. Effect of the build orientation on the mechanical properties and fracture modes of SLM Ti-6Al-4V10.1016/j.msea.2014.07.086 ↗
24. Grain boundary α -phase precipitation and coarsening : Comparing laser powder b e d fusion with as-cast Ti-6Al-4V10.1016/j.scriptamat.2021.114261 ↗
25. Role of martensite decomposition in tensile properties of selective laser melted Ti-6Al-4V10.1016/j.jallcom.2018.02.111 ↗
26. Development of a pre-heat treatment for obtaining discontinuous grain boundary α in laser melting deposited Ti-5Al-5Mo-5V-1Cr-1Fe alloy10.1016/j.msea.2014.03.028 ↗
27. Effects of heat treatments on microstructures and mechanical properties of selective laser melted Ti6Al4V alloy10.3390/met11101593 ↗
28. Microstructural optimization through heat treatment for enhancing the fracture toughness and fatigue crack growth resistance of selective laser melted Ti–6Al–4V alloy10.1016/j.actamat.2019.03.003 ↗
29. Influence of trace boron addition on microstructure, tensile properties and their anisotropy of Ti6Al4V fabricated by laser directed energy deposition10.1016/j.matdes.2019.107943 ↗
30. Effect of trace lanthanum hexaboride and boron additions on microstructure, tensile properties and anisotropy of Ti-6Al-4V produced by additive manufacturing10.1016/j.msea.2018.02.012 ↗
31. Formation of grain boundary α in β Ti alloys: Its role in deformation and fracture behavior of these alloys10.1007/s11661-010-0322-3 ↗
32. Effects of subtransus heat treatments on microstructure features and mechanical properties of wire and arc additive manufactured Ti–6Al–4V alloy10.1016/j.msea.2020.139020 ↗
33. Effects of boron addition on microstructures and mechanical properties of Ti-6Al-4V manufactured by direct laser deposition10.1016/j.matdes.2019.108191 ↗
34. Grain boundary discontinuity and performance improvement mechanism of wire arc additive manufactured Ti–6Al–4V10.1016/j.jallcom.2021.159287 ↗
35. L.A. Giannuzzi, Introduction to Focused Ion Beams: Instrumentation, Theory, Techniques and Practice, Springer Science & Business Media, 2004.10.1007/b101190 ↗
36. Enhanced mechanical properties of Ti6Al4V alloy fabricated by laser additive manufacturing under static magnetic field10.1080/21663831.2022.2064195 ↗
37. Anisotropic tensile behavior of Ti-6Al-4V components fabricated with directed energy deposition additive manufacturing10.1016/j.actamat.2014.12.054 ↗
38. Effects of build direction on tensile and fatigue performance of selective laser melting Ti6Al4V titanium alloy10.1016/j.ijfatigue.2019.105260 ↗
39. Fatigue crack initiation in as forged Ti-6Al-4V bars with macrozones present10.1016/j.ijfatigue.2015.05.020 ↗
40. Effect of the presence of macrozones on short crack propagation in forged two-phase titanium alloys10.1016/j.ijfatigue.2017.07.002 ↗
41. The effect of local textures on microcrack fatigued f. c. c. metals propagation in10.1016/S0921-5093(97)00320-1 ↗
42. Effect of crystallographic orientation and geometrical compatibility on fatigue crack initiation and propagation in rolled Ti-6Al-4V alloy10.1016/j.actamat.2019.07.025 ↗
43. Formation mechanism of the α variant and its influence on the tensile properties of laser solid formed Ti-6Al-4V titanium alloy10.1016/j.msea.2017.03.035 ↗