Synergistic effects of Monel 400 filler wire in gas metal arc welding of CoCrFeMnNi high entropy alloy
Source abstract
Abstract
Weldability plays a crucial role in the journey of high entropy alloys towards their engineering applications. In this study, gas metal arc welding was performed to join an as-rolled CoCrFeMnNi high entropy alloy using Monel 400 as the filler wire. The present research findings demonstrate a favorable metallurgical chemical reaction between the Monel 400 filler and the CoCrFeMnNi high entropy alloy, resulting in compositional mixing within the fusion zone that promotes a solid-solution strengthening effect, counteracting the typical low hardness associated to the fusion zone of these alloys. The weld thermal cycle induced multiple microstructure changes across the joint, including variations in the grain size, existing phases and local texture. The grain size was seen to increase from the base material toward the fusion zone. An FCC matrix and finely sparse Cr-Mn-based oxides existed in both base material and heat affected zone, while in the fusion zone new FCC phases and carbides were formed upon the mixing of the Monel 400 filler. The role of the filler material on the fusion zone microstructure evolution was rationalized using thermodynamic calculations. Texture shifted from a γ-fiber (in the base material) to a strong cubic texture in the fusion zone. Digital image correlation during tensile testing to fracture coupled with microhardness mapping revealed that, stemming from the process-induced microstructure changes, the micro and macromechanical response differed significantly from the original base material. This study successfully established a correlation between the impact of the process on the developed microstructural features and the resultant mechanical behavior, effectively assessing the processing-microstructure-properties relationships towards an improved understanding of the physical metallurgy associated to these advanced engineering alloys. In conclusion, this work provides an important theoretical framework and practical guidance for optimizing the engineering applications of high entropy alloys.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
2. Mechanical behavior of high-entropy alloys10.1016/j.pmatsci.2021.100777 ↗
3. Effect of aging on corrosion resistance of (FeCoNi)86Al7Ti7 high entropy alloys10.1016/j.corsci.2023.111717 ↗
4. Electrochemical corrosion and high temperature hot corrosion behavior of NbTaTiV and CrNbTaTiV high entropy alloy10.1016/j.jmrt.2023.11.247 ↗
5. Enhancing corrosion resistance in CoCrFeNiTa high entropy alloys via Mo addition10.1016/j.electacta.2024.143951 ↗
6. Towards high-entropy alloys with high-temperature corrosion resistance and structural stability10.1016/j.jmst.2023.07.035 ↗
7. Cu alloying enables superior strength-ductility combination and high corrosion resistance of FeMnCoCr high entropy alloy10.1016/j.jallcom.2023.172543 ↗
8. Excellent strength-ductility combination of Cr26Mn20Fe20Co20Ni14 high-entropy alloy at cryogenic temperatures10.1016/j.jmst.2023.01.023 ↗
9. CALPHAD-aided design for superior thermal stability and mechanical behavior in a TiZrHfNb refractory high-entropy alloy10.1016/j.actamat.2023.118728 ↗
10. Micro-mechanical deformation behavior of CoCrFeMnNi high-entropy alloy10.1016/j.jmst.2021.04.079 ↗
11. Welding metallurgy10.22486/iwj.v4i3.150243 ↗
12. Reaching unconventionally large Hall-Petch coefficients in face-centered cubic high-entropy alloys10.1080/21663831.2024.2337211 ↗
13. A short review on welding and joining of high entropy alloys10.3390/met10020212 ↗
14. A critical review on solid-state welding of high entropy alloys– processing, microstructural characteristics and mechanical properties of joints
15. Weldability of high entropy alloys: Microstructure, mechanical property, and corrosion resistance10.1016/j.jmapro.2023.05.049 ↗
16. Weldability of a high entropy CrMnFeCoNi alloy10.1016/j.scriptamat.2016.06.046 ↗
17. Microstructure and mechanical properties of friction stir welded and laser welded high entropy alloy CrMnFeCoNi10.1007/s12540-017-7248-x ↗
18. Effect of post weld heat treatment on weldability of high entropy alloy welds10.1080/13621718.2017.1405564 ↗
19. Laser beam welding of a CoCrFeNiMn-type high entropy alloy produced by self-propagating high-temperature synthesis10.1016/j.intermet.2018.02.014 ↗
20. Friction stir welding of CoCrNi medium-entropy alloy: Recrystallization behaviour and strengthening mechanism10.1016/j.msea.2022.143361 ↗
21. Investigation of microstructure, texture, and mechanical properties of FeCoNiCrMn high entropy alloy during drive friction welding10.1016/j.matchar.2022.111959 ↗
22. Gradient microstructure and interfacial strength of CoCrFeMnNi high-entropy alloy in solid-state ultrasonic welding10.1016/j.msea.2021.141885 ↗
23. Enhanced strength and ductility in a friction stir processing engineered dual phase high entropy alloy10.1038/s41598-017-16509-9 ↗
24. Gas tungsten arc weldability of stainless steel 304 using CoCrFeMnNi filler metals for cryogenic applications10.1080/13621718.2021.1996851 ↗
25. Welding dissimilar alloys of CoCrFeMnNi high-entropy alloy and 304 stainless steel using gas tungsten arc welding10.1007/978-981-99-2392-2 ↗
26. Microstructure and mechanical properties of gas metal arc welded CoCrFeMnNi joints using a 308 stainless steel filler metal10.1016/j.scriptamat.2022.115053 ↗
27. Weldability of cast CoCrFeMnNi high-entropy alloys using various filler metals for cryogenic applications10.1016/j.jallcom.2019.153278 ↗
28. Microstructure and mechanical properties of gas metal arc welded CoCrFeMnNi joints using a 410 stainless steel filler metal10.1016/j.msea.2022.144025 ↗
29. Effect of cold work on hydrogen embrittlement of monel-40010.1007/s11668-023-01836-z ↗
30. The influence of nominal composition on the microstructure, tensile properties, and weldability of cast monel alloys10.1007/s11661-023-07269-5 ↗
31. Revealing the effect of heat treatment on stress corrosion cracking behavior of Monel 400 alloy in hydrofluoric acid vapor environment10.1016/j.corsci.2023.111046 ↗
32. Gas tungsten arc welding of as-rolled CrMnFeCoNi high entropy alloy10.1016/j.matdes.2020.108505 ↗
33. Revisiting fundamental welding concepts to improve additive manufacturing: From theory to practice10.1016/j.pmatsci.2019.100590 ↗
34. Effect of weld reinforcement on tensile and fatigue properties of 5083 aluminum metal inert gas (MIG) welded joint: Experiments and numerical simulations10.1016/j.ijfatigue.2020.106046 ↗
35. Unveiling the microstructure evolution and mechanical properties in a gas tungsten arc-welded Fe–Mn–Si–Cr–Ni shape memory alloy10.1007/s10853-024-09606-4 ↗
36. Influences of solution temperature on microstructures and performance of electron beam welded joints of laser powder bed fusion TC11 thin-walled samples10.1016/j.matchar.2024.113926 ↗
37. Microstructure and mechanical behavior of additively manufactured CoCrFeMnNi high-entropy alloys: Laser directed energy deposition versus powder bed fusion10.1016/j.actamat.2023.118884 ↗
38. Critical microstructures and defects in heterostructured materials and their effects on mechanical properties10.1016/j.actamat.2020.03.001 ↗
39. Nanoscale modulated structures by balanced distribution of atoms and mechanical/structural stabilities in CoCuFeMnNi high entropy alloys10.1016/j.msea.2019.138120 ↗
40. Characterization of the microscale/nanoscale hierarchical microstructure of an as-cast CrMnFeNiCu high-entropy alloy with promising mechanical properties10.1016/j.jallcom.2023.170091 ↗
41. Strengthening and deformation behavior of as-cast CoCrCu1.5MnNi high entropy alloy with micro-/nanoscale precipitation10.1016/j.msea.2022.143729 ↗
42. Formation of Cu-Ni enriched phases during laser processing of non-equiatomic AlSiCrMnFeNiCu high entropy alloy nanoparticles10.1016/j.jallcom.2022.166905 ↗
43. Phase equilibria in equiatomic CoCuFeMnNi high entropy alloy10.1016/j.matchemphys.2017.08.051 ↗
44. Understanding the deformation behavior of CoCuFeMnNi high entropy alloy by investigating mechanical properties of binary ternary and quaternary alloy subsets10.1016/j.matdes.2018.07.046 ↗
45. Cu assisted stabilization and nucleation of L12 precipitates in Al0.3CuFeCrNi2 fcc-based high entropy alloy10.1016/j.actamat.2017.02.053 ↗
46. Contact-reactive brazing of CoCrFeMnNi high-entropy alloy to Zr alloys using Cu interlayer10.1016/j.matchar.2023.113186 ↗
47. Material characterization and mechanical performance of laser diffusion welded joint between titanium alloy and stainless steel10.1016/j.matlet.2023.133927 ↗
48. Inclined θ′ precipitates with terraced Cu/Mn-rich multilayers in Al–Cu alloys10.1016/j.jmrt.2024.03.067 ↗
49. Criteria for predicting twin-induced plasticity in solid solution copper alloys10.1016/j.msea.2017.11.076 ↗
50. Achieving exceptional strength-ductility combination in a novel L12 nanoparticles-strengthened high-entropy alloy via conventional casting10.1016/j.intermet.2023.108160 ↗
51. Microstructure and early-stage oxidation behavior of Co-Cr-Cu-Fe-Mn-Ni high-entropy alloys10.1007/s11837-023-06082-0 ↗
52. Hierarchical structured as-cast CrFeNiMn0.5Cu0.5 high entropy alloy with excellent tensile strength/ductility properties10.1016/j.scriptamat.2021.114473 ↗
53. Alloying effects on the microstructure and properties of CoCrFeMnNiX0.1 high-entropy alloys via rolling and thermal treatment10.1007/s10853-024-09639-9 ↗
54. In-situ EBSD study on the cube texture evolution in 3 wt% Si steel complemented by ex-situ EBSD experiment — From nucleation to grain growth10.1016/j.actamat.2018.11.054 ↗
55. Correlation between formability, ridging and recrystallization texture development in ferritic stainless steel fabricated by introducing intermediate annealing during cold rolling10.1016/j.matchar.2023.113296 ↗
56. Microstructure and texture of heavily cold-rolled and annealed extremely low stacking fault energy Cr26Mn20Fe20Co20Ni14 high entropy alloy: Comparative insights10.1016/j.jallcom.2022.167418 ↗
57. Severe warm-rolling mediated microstructure and texture of equiatomic CoCrFeMnNi high entropy alloy: A comparison with cold-rolling10.1016/j.intermet.2020.107029 ↗
58. Texture formation in face-centered cubic high-entropy alloys10.1016/j.jallcom.2020.154183 ↗
59. High-cycle fatigue induced twinning in CoCrFeNi high-entropy alloy processed by laser powder bed fusion additive manufacturing
60. Microstructures and mechanical properties of a welded CoCrFeMnNi high-entropy alloy10.1080/13621718.2018.1430114 ↗
61. The influence of cooling rate during crystallization on the effective partitioning coefficient in high-entropy alloys from Al-Ti-Co-Ni-Fe system10.1007/s11661-016-3498-3 ↗
62. Influence of micro-segregation on the microstructure, and microhardness of MoNbTaxTi(1–x)W refractory high entropy alloys: Experimental and DFT approach10.1016/j.intermet.2023.108080 ↗
63. Effect of heat treatment on the structure and properties of laser welded joints of aluminum alloy AA202410.1007/s11041-023-00851-z ↗
64. Identifying the Effect of PWHT on strength of laser beam welding joints of AA2024 aluminum alloy10.1115/1.4053496 ↗