One-step synthesis of sandwich-type Cu/graphene/Cu ultrathin foil with enhanced property via electrochemical route
Source abstract
Abstract
A layered structure has a better effect on improving performance of the graphene-reinforced composites due to its unique two-dimensional structure and excellent properties. In this paper, a novel “one-step” electrochemical route was proposed for synthesizing the graphene-reinforced ultrathin copper (Cu) foil with high performance. The process includes: 1) A loose graphene oxide (GO) membrane, was prepared by electrophoresis deposition (EPD), that allows Cu ions passing through; 2) According to the difference of Cu deposition potential on different substrates, a potential step was designed for electrodepositing Cu successively on both sides of the GO membrane, i.e., the bottom Cu layer forms under low over-potential, while the top Cu layer forms under high over-potential. The experimental results show that the foil thickness reaches to as thin as 4–5 μm, and the tensile strength is almost twice as large as that of pure Cu foil. The process is simple, controllable and possible mass production, and expected to further practical applications in fields of Cu clad plate, printed circuit board and lithium-ion battery cathode collector system for saving raw material and also the space. In addition, this work proposes a new idea for preparing the layered composites via electrochemical route.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Graphene research and applications · Aluminum Alloys Composites Properties · Advancements in Battery Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. High-performance lithium-ion batteries with 1.5 μm thin copper nanowire foil as a current collector10.1016/j.jpowsour.2017.02.041 ↗
2. Facile and scalable electrodeposition of copper current collectors for high-performance Li-metal batteries10.1016/j.nanoen.2019.02.048 ↗
3. Engraving copper foil to give large-scale binder-free porous CuO arrays for a high-performance sodium-ion battery anode10.1002/adma.201304469 ↗
4. Electrochemical corrosion properties of commercial ultra-thin copper foils10.1007/s11664-017-5517-6 ↗
5. Synergistic effects of gelatin and convection on copper foil electrodeposition10.1016/j.electacta.2016.06.051 ↗
6. Effect of electrodeposition conditions on the properties of Cu–Si3N4 composite coatings10.1016/j.apsusc.2014.02.021 ↗
7. Impedance studies of copper foil and graphite-coated copper foil electrodes in lithium-ion battery electrolyte10.1016/j.electacta.2005.03.051 ↗
8. Electrodeposition of CNTs/copper composite coatings with enhanced tribological performance from a low concentration CNTs colloidal solution10.1016/j.materresbull.2017.09.062 ↗
9. Acquiring well balanced strength and ductility of Cu/CNTs composites with uniform dispersion of CNTs and strong interfacial bonding10.1016/j.msea.2018.07.046 ↗
10. Direct determination of graphene amount in electrochemical deposited Cu-based composite foil and its enhanced mechanical property10.1039/C6RA25512D ↗
11. Enhanced the thermal conductivity of flexible copper foil by introducing graphene10.1016/j.matdes.2019.108373 ↗
12. The rise of graphene10.1038/nmat1849 ↗
13. Electric field effect in atomically thin carbon films10.1126/science.1102896 ↗
14. A roadmap for graphene10.1038/nature11458 ↗
15. Graphene: status and prospects10.1126/science.1158877 ↗
16. Enhanced mechanical properties of few-layer graphene reinforced titanium alloy matrix nanocomposites with a network architecture10.1016/j.matdes.2019.108330 ↗
17. Electrical conductivity of copper-Cgraphene composite films synthesized by electrochemical deposition with exfoliated graphene platelets10.1116/1.3701701 ↗
18. Preparation of Cu-Graphene composite thin foils via DC electro-deposition and its optimal conditions for highest properties10.1149/2.0121712jes ↗
19. Surfactant-free electrodeposition of reduced graphene oxide/copper composite coatings with enhanced wear resistance10.1016/j.apsusc.2017.10.014 ↗
20. Preparation and characterization of the graphene-Cu composite film by electrodeposition process10.1016/j.mee.2016.02.006 ↗
21. A new electrochemical approach for the synthesis of copper-graphene nanocomposite foils with high hardness10.1038/srep04049 ↗
22. Strengthening effect of single-atomic-layer graphene in metal¨Cgraphene nanolayered composites10.1038/ncomms3114 ↗
23. Microstructure and electrical conductivity of laminated Cu/CNT/Cu composites prepared by electrodeposition10.1016/j.jallcom.2017.05.074 ↗
24. Sandwich-type laminated nanocomposites developed by selective dip-coating of carbon nanotubes10.1002/adma.200600908 ↗
25. Discuss on processing difficulties of ultra-thin copper foil in PCB manufacturing
26. Influence of rare earth on the peeling properties of ultra-thin copper foil with carrier10.4028/www.scientific.net/AMR.652-654.1755 ↗
27. Synthesis of reduced graphene oxide (rGO) films onto carbon steel by cathodic electrophoretic deposition: anticorrosive coating10.1016/j.carbon.2017.06.074 ↗
28. The production of a corrosion resistant graphene reinforced composite coating on copper by electrophoretic deposition10.1016/j.carbon.2013.04.063 ↗
29. Quantitative evaluation of electrophoretic deposition kinetics of graphene oxide10.1016/j.carbon.2013.10.041 ↗
30. Electrophoretic deposition of graphene-related materials: a review of the fundamentals10.1016/j.pmatsci.2016.03.002 ↗
31. Graphene-and-copper artificial nacre fabricated by a preform impregnation process: bioinspired strategy for strengthening-toughening of metal matrix composite10.1021/acsnano.5b01067 ↗
32. Interface structure and strengthening behavior of graphene/CuCr composites10.1016/j.carbon.2018.03.018 ↗
33. Largely enhanced thermal conductivity of graphene/copper composites with highly aligned graphene network10.1016/j.carbon.2017.10.099 ↗
34. Graphene and graphene oxide: synthesis, properties, and applications10.1002/adma.201001068 ↗
35. High yield preparation of macroscopic graphene oxide membranes10.1021/ja807934n ↗
36. Raman spectrum of graphene and graphene layers10.1103/PhysRevLett.97.187401 ↗
37. Raman spectroscopy as a versatile tool for studying the properties of graphene10.1038/nnano.2013.46 ↗
38. Perspectives on carbon nanotubes and graphene Raman spectroscopy10.1021/nl904286r ↗
39. Mechanical properties of carbon nanotube-copper nanocomposites10.1088/0960-1317/18/3/035013 ↗
40. Interface design of graphene/copper composites by matrix alloying with titanium10.1016/j.matdes.2018.02.038 ↗
41. Graphene-boundary strengthening mechanism in Cu/graphene nanocomposites: a molecular dynamics simulation10.1016/j.matdes.2020.108555 ↗
42. Direct electrochemical synthesis of reduced graphene oxide (rGO)/copper composite films and their electrical/electroactive properties10.1021/am500768g ↗
43. Effect of interface structure on the mechanical properties of graphene nanosheets reinforced copper matrix composites10.1021/acsami.8b09799 ↗
44. Optimizing interfacial cross-linking in graphene-derived materials, which balances Intralayer and interlayer load transfer10.1021/acsami.7b04411 ↗
45. Interface interaction and synergistic strengthening behavior in pure copper matrix composites reinforced with functionalized carbon nanotube-graphene hybrids10.1016/j.carbon.2019.02.048 ↗
46. Influence of graphene oxide content on the Zn-Gr composite layer prepared by pulse reverse electro-plating10.1149/2.0431811jes ↗
47. N-doped graphene-based copper nanocomposite with ultralow electrical resistivity and high thermal conductivity10.1038/s41598-018-27667-9 ↗
48. Ultrastrong graphene-copper core-shell wires for high-performance electrical cables10.1021/acsnano.8b00043 ↗
49. Enhanced electrical and thermal conduction in graphene-encapsulated copper nanowires10.1021/nl504889t ↗
50. The influence of interface structure on the electrical conductivity of graphene embedded in aluminum matrix10.1002/admi.201900468 ↗
51. Conductive enhancement of copper/graphene composites based on high-quality graphene10.1039/C5RA15189A ↗