journal article·2023-03Open access

Laser intensity profile as a means to steer microstructure of deposited tracks in Directed Energy Deposition

Scholte J.L. Bremer, Martin Luckabauer, Gert-willem R.B.E. Römer

Materials & Design· Volume 227

Abstract

In Laser-based Directed Energy Deposition (L-DED) the laser-induced spatial and temporal thermal cycles strongly determine the microstructure of deposited layers. The effect of three different laser intensity profiles (beam shapes) on the shape of the melt pool and the resulting microstructure was studied. To this end, thermal gradients and growth rates, derived from measured melt pool emissions, are compared to characteristics of the microstructure in the deposited tracks. These characteristics are obtained using Electron Back Scatter Diffraction (EBSD). It was found that the shape of the laser beam strongly affects the melt pool morphology. Therefore it affects also the solidification characteristics and thus the resulting microstucture. Correlations are found between the thermal gradient - growth rate ratios and the grain shapes and amount of texture. Hence, the beam profile is a tool to steer the microstructure of deposited parts during L-DED.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Gibson · 2015
2. Additive manufacturing of metallic components – Process, structure and properties10.1016/j.pmatsci.2017.10.001 ↗
3. An overview of Direct Laser Deposition for additive manufacturing; Part I: Transport phenomena, modeling and diagnostics
4. An overview of Direct Laser Deposition for additive manufacturing; Part II: Mechanical behavior, process parameter optimization and control
5. Directed energy deposition (DED) additive manufacturing: Physical characteristics, defects, challenges and applications10.1016/j.mattod.2021.03.020 ↗
6. S. Kou. Welding Metallurgy. John Wiley & Sons, Inc, 143–169, 2002. URL https://doi.org/10.1002/0471434027.ch6.10.1002/0471434027.ch6 ↗
7. Thermal Behavior and Microstructural Evolution during Laser Deposition with Laser-Engineered Net Shaping: Part I. Numerical Calculations10.1007/s11661-008-9557-7 ↗
8. Microstructure and properties of laser clad coatings studied by orientation imaging microscopy10.1016/j.actamat.2010.09.002 ↗
9. Understanding the Microstructure Formation of Ti-6Al-4V During Direct Laser Deposition via In-Situ Thermal Monitoring10.1007/s11837-015-1767-z ↗
10. Optical monitoring of high power direct diode laser cladding10.1016/j.optlastec.2014.06.002 ↗
11. In-process measurement of melt pool cross-sectional geometry and grain orientation in a laser directed energy deposition additive manufacturing process10.1016/j.optlastec.2020.106280 ↗
12. Hofman · 2009
13. Development and characterization of multilayer laser cladded high speed steels
14. Influence of intensity distribution on the meltpool and clad shape for laser cladding
15. Hyperspectral and thermal temperature estimation during laser cladding10.2351/1.5096129 ↗
16. Modulation of power density distribution in time and space for high speed laser cladding10.1016/j.jmatprotec.2007.05.052 ↗
17. Study of a hollow laser beam for cladding10.1007/s00170-014-5763-1 ↗
18. Equipment and process windows for laser metal deposition with coaxial wire feeding10.2351/1.5096112 ↗
19. Study of an annular laser beam based axially-fed powder cladding process10.1016/j.cirp.2018.04.082 ↗
20. Laser beam profile modulation for microstructure control in laser cladding of an NiCrBSi alloy10.1016/j.surfcoat.2014.03.018 ↗
21. Weld pool shaping and microstructural control using novel computer generated holographic optic laser welding of steel and stainless steel10.4028/www.scientific.net/MSF.638-642.3673 ↗
22. Grain size control in the weld pool and heat affected zone using holograms10.4028/www.scientific.net/MSF.715-716.340 ↗
23. The use of holographic optical elements (HOE’s) to investigate the use of a flat irradiance profile in the control of heat absorption in wire-fed laser cladding10.1016/j.jmatprotec.2015.01.023 ↗
24. Modulating laser intensity profile ellipticity for microstructural control during metal additive manufacturing10.1016/j.actamat.2017.02.025 ↗
25. Shaped laser beam profiles for heat conduction welding of aluminium-copper alloys10.1016/j.optlaseng.2018.11.025 ↗
26. Holographic diffractive optical elements allow improvements in conduction laser welding of steels. ICALEO 2006–25th Int
27. The influence of laser characteristics on internal flow behaviour in laser melting of metallic substrates10.1016/j.matdes.2022.110385 ↗
28. Beam shaping BrightLine Weld: latest application results
29. Effects of scanning pattern on the grain structure and elastic properties of additively manufactured 316L austenitic stainless steel10.1016/j.msea.2021.142447 ↗
30. Effects of sinusoidal oscillating laser beam on weld formation, melt flow and grain structure during aluminum alloys lap welding10.1016/j.jmatprotec.2021.117314 ↗
31. Solidification prediction of laser cladding 316L by the finite element simulation10.1007/s00170-019-03566-9 ↗