journal article·2018-11

Orthorhombic precipitate variant selection in a Ti2AlNb based alloy

Youping Zheng, Weidong Zeng, Dong Li, Jianwei Xu, Xiong Ma, Xiaobo Liang, Jianwei Zhang

Materials & Design· Volume 158
Publisher page

Abstract

Abstract Variant selections of intragranular and intergranular orthorhombic precipitates in Ti-22Al-25Nb alloy are studied. It was found that strong variant selections occurred when intragranular orthorhombic phases (O phases) precipitated in microstructures with abundant deformation-introduced dislocations. The selected variants grew into parallel O phase lamellae and developed into cluster structures. In the microstructures with low dislocation intensities, all 12 can-be-selected variants could be observed. The interaction energy between the transformation strain and the stress field of prior dislocations were calculated. The results suggested that dislocations could indeed promote variant selections of intragranular O phases. Intergranular O phases (GBO) at high angle boundaries usually select the variants holding the specific orientation relations {001}O//{110}B2 and ⟨1 1 ¯ 0⟩O//⟨ 1 ¯ 11⟩B2 (OBOR here after) with one of the two adjacent B2 grains. In a special case where the adjacent B2 grains share a common {110}B2 plane, the two variants that have their {001}O parallel to the common {110}B2 would be both selected. The two variants keep OBOR with the two B2 grains respectively and form so-called ploy-twins structures. Moreover, O phase colony structures would be formed when a GBO grew inward the adjacent B2 grain that holds OBOR with it.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Titanium Alloys Microstructure and Properties · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. A new ordered orthorhombic phase in a Ti3Al-Nb alloy10.1016/0001-6160(88)90141-1 ↗
2. The intermetallic Ti2AlNb10.1016/S0079-6425(97)00012-1 ↗
3. Part I. The microstructural evolution in Ti-Al-Nb O + Bcc orthorhombic alloys10.1007/s11661-999-0240-4 ↗
4. Microstructure, creep, and tensile behavior of a Ti-21Al-29Nb (at.%) orthorhombic +B2 alloy10.1016/j.intermet.2005.08.006 ↗
5. Tensile behavior of Ti-22Al-24Nb-0.5Mo in the range 25–650 °C10.1016/j.msea.2016.10.047 ↗
6. In situ investigation of the tensile deformation of laser welded Ti2AlNb joints10.1016/j.matchar.2016.11.009 ↗
7. Intermetallic alloys based on orthorhombic titanium aluminide10.1002/1527-2648(200111)3:11<851::AID-ADEM851>3.0.CO;2-G ↗
8. Quantitative analysis on microstructure evolution and tensile property for the isothermally forged Ti2AlNb alloy during heat treatment10.1016/j.msea.2013.03.003 ↗
9. Coarsening behavior of lamellar orthorhombic phase and its effect on tensile properties for the Ti-22Al-25Nb alloy10.1016/j.msea.2014.05.076 ↗
10. Designed bimodal size lamellar O microstructures in Ti2AlNb based alloy: microstructural evolution, tensile and creep properties10.1016/j.msea.2014.09.035 ↗
11. Variant selection in heterogeneous nucleation on defects in diffusional phase transformation and precipitation10.1016/S0921-5093(00)01904-3 ↗
12. Effect of heat treatment on the crystallographic orientation evolution in a near-α titanium alloy Ti6010.1016/j.actamat.2017.04.007 ↗
13. Characterization of the variant selection occurring during the α → β → α phase transformations of a cold rolled titanium sheet10.1016/S1359-6454(01)00351-2 ↗
14. Variant selection during α precipitation in Ti-6Al-4V under the influence of local stress - a simulation study10.1016/j.actamat.2013.06.042 ↗
15. On the process of transition of the cubic-body-centered modification into the hexagonal-close-packed modification of zirconium10.1016/S0031-8914(34)80244-3 ↗
16. Lütjering · 2007 · 23
17. Comosite structure of α phase in metastable β Ti alloys induced by lattice strain during β to α phase transformation10.1016/j.actamat.2017.04.051 ↗
18. Selection of α variants during microstructural evolution in α/β titanium alloys10.1080/14786430701373672 ↗
19. Effect of β (110) texture intensity on α-variant selection and microstructure morphology during β → α phase transformation in near α titanium alloy10.1016/j.actamat.2016.12.069 ↗
20. Investigation of the α- and β-texture evolution of hot rolled Ti-64 products10.1016/S0921-5093(96)10388-9 ↗
21. Study of the β-α phase transformation of a Ti-64 sheet induced from a high-temperature β state and high-temperature α + β state10.1007/s11661-997-0082-x ↗
22. Crystallography of α phase precipitated on dislocations and deformation twin boundaries in a β titanium alloy10.2320/matertrans1989.33.585 ↗
23. Energy consideration for variant selection in precipitation on dislocations10.1016/S1468-6996(01)00010-9 ↗
24. Variant selection by dislocations during α precipitation in α/β titanium alloys10.1016/j.actamat.2014.12.044 ↗
25. Nucleation and variant selection of secondary α plates in a β Ti alloy10.1016/j.actamat.2008.08.016 ↗
26. Variant selection of grain boundary α by special prior β grain boundaries in titanium alloys10.1016/j.actamat.2014.05.003 ↗
27. Experimental assessment of variant selection rules for grain boundary α in titanium alloys10.1016/j.actamat.2015.09.021 ↗
28. B2 grain size refinement and its effect on room temperature tensile properties of a Ti-22Al-25Nb orthorhombic intermetallic alloy10.1016/S1359-6462(02)00462-1 ↗
29. Deformation and microstructure evolution above B2 transus of Ti-22Al-25Nb (at%) orthorhombic alloy10.1016/j.msea.2017.10.100 ↗
30. Oxidation behavior of Zr-containing Ti2AlNb-based alloy at 800 °C10.1016/S1003-6326(15)63664-0 ↗
31. Read · 1953 · 114
32. Hull · 1983 · 71
33. Hot compression of TC8M-1: constitutive equations, processing map, and microstructure evolution10.1007/s11661-016-3493-8 ↗
34. Deformation behavior and microstructure evolution during hot working of a coarse-grained Ti-5Al-5Mo-5V-3Cr-1Zr titanium alloy in beta phase field10.1016/j.msea.2017.03.095 ↗
35. Predicting equilibrium shape of precipitates as function of coherency state10.1016/j.actamat.2012.04.019 ↗
36. Fracture toughness of the bimodal size lamellar O phase microstructures in Ti-22Al-25Nb (at.%) orthorhombic alloy10.1016/j.jallcom.2017.03.184 ↗
37. Transformation of bcc and B2 high temperature phases to hcp and orthorhombic structures in the Ti-Al-Nb system. Part II: experimental TEM study of microstructures10.6028/jres.098.039 ↗