journal article·2024-02Open access

The design optimization of nanostructured hierarchical electrodes for solid oxide cells by artificial impregnation

Davide Cademartori, Maxime Hubert, Peter Cloetens, M. Paola Carpanese, Jérôme Laurencin

Materials & Design· Volume 238

Abstract

Microstructural correlations of impregnated freeze tape cast scaffolds for solid oxide cells are studied by coupling experimental and modelling approaches. The functional and supporting layers of the hierarchical porous backbones are initially reconstructed by synchrotron X-ray micro- and nano-holotomography, respectively. A particle-based model was then built to numerically infiltrate the scaffold walls with hemispherical nanoparticles. The electrode microstructural properties are evaluated on the artificially impregnated electrodes as function of the catalyst loading. A parametric investigation on the effect of the nanoparticle size is performed to analyse the evolution of the electrode characteristics. It has been shown that the volume fraction of the infiltrated phase necessary to reach the percolating threshold is increased while increasing the nanoparticle size. The density of active sites presents a maximum as function of the catalyst loading that depends on the particle size. The volume fraction of infiltrated phase required to reach the percolating threshold in the diffusion layer is one order of magnitude lower than in the functional layer (∼1 vol% compared to 3–8 vol%, respectively). The analyses contained in this paper aim at guiding the manufacturing process to the shaping of innovative electrodes microstructures combining both high activation and mass transfer properties.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Catalytic Processes in Materials Science · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Electrical energy storage for the grid: a battery of choices10.1126/science.1212741 ↗
2. A review of thermal energy storage technologies for seasonal loops10.1016/j.energy.2021.122207 ↗
3. Decarbonising energy: The developing international activity in hydrogen technologies and fuel cells10.1016/j.jechem.2020.03.087 ↗
4. Eliminating degradation in solid oxide electrochemical cells by reversible operation10.1038/nmat4165 ↗
5. Reversible solid oxide systems for energy and chemical applications – Review & perspectives
6. Reversible solid-oxide cells for clean and sustainable energy10.1093/ce/zkz023 ↗
7. B. Yildiz, 6 - Reversible solid oxide electrolytic cells for large-scale energy storage: challenges and opportunities, in: J.A. Kilner, S.J. Skinner, S.J.C. Irvine, P.P. Edwards (Eds.), Functional Materials for Sustainable Energy Applications, Woodhead Publishing2012, pp. 149-179e.10.1533/9780857096371.2.147 ↗
8. Fabrication, microstructure and properties of a YSZ electrolyte for SOFCs10.1016/j.jpowsour.2006.11.054 ↗
9. Investigation on microstructures of NiO–YSZ composite and Ni–YSZ cermet for SOFCs10.1016/j.ijhydene.2010.04.156 ↗
10. Kinetic Monte Carlo (KMC) simulation of sintering of nickel oxide-yttria stabilized zirconia composites: Model, parameter calibration and validation10.1016/j.matdes.2023.112094 ↗
11. Deconvolution of four transmission-line-model impedances in Ni-YSZ/YSZ/LSM solid oxide cells and mechanistic insights10.1016/j.electacta.2015.11.118 ↗
12. Air electrodes and related degradation mechanisms in solid oxide electrolysis and reversible solid oxide cells10.1016/j.rser.2021.110918 ↗
13. Preparation and characterization of 10mol% Gd doped CeO2 (GDC) electrolyte for SOFC applications10.1016/j.ceramint.2012.05.030 ↗
14. Identifiability of the mechanisms governing the reaction kinetics of MIEC electrodes in solid oxide cells10.1016/j.electacta.2023.143418 ↗
15. Electrochemical simulation of planar solid oxide fuel cells with detailed microstructural modeling10.1016/j.electacta.2014.08.120 ↗
16. Microstructural correlations for specific surface area and triple phase boundary length for composite electrodes of solid oxide cells10.1016/j.jpowsour.2018.11.095 ↗
17. Nenning · 2020
18. Effect of calcined parameters on microstructure and electrical conductivity of 10Sc1CeSZ10.1016/j.jallcom.2016.06.039 ↗
19. Microstructural Characterization of SOFC Electrodes: observations and Simulations10.1149/1.3570123 ↗
20. Solid oxide fuel cell: Decade of progress, future perspectives and challenges10.1016/j.ijhydene.2021.06.020 ↗
21. Boosting solid oxide electrolyzer performance by fine tuning the microstructure of electrodes – Preliminary study10.1016/j.ijhydene.2022.04.074 ↗
22. Solid Oxide Electrolysis Cells: Microstructure and Degradation of the Ni/Yttria-Stabilized Zirconia Electrode10.1149/1.2967331 ↗
23. Degradation of Ni-YSZ electrodes in solid oxide cells: impact of polarization and initial microstructure on the Ni Evolution10.1149/2.1261915jes ↗
24. Modelling of solid oxide steam electrolyser: Impact of the operating conditions on hydrogen production10.1016/j.jpowsour.2010.09.054 ↗
25. Novel functionally graded acicular electrode for solid oxide cells fabricated by the freeze-tape-casting process10.1016/j.jpowsour.2012.03.109 ↗
26. The effect of porous composite electrode structure on solid oxide fuel cell performance: I. theoretical analysis10.1149/1.1837360 ↗
27. Microstructure effect on the permeability of the tape-cast open-porous materials10.1016/j.matdes.2019.107639 ↗
28. Manufacturing porous ceramic materials by tape casting—A review10.1016/j.jeurceramsoc.2017.11.047 ↗
29. Screen-printing inks for the fabrication of solid oxide fuel cell films: A review10.1016/j.rser.2016.11.008 ↗
30. Reversible fuel electrode supported solid oxide cells fabricated by aqueous multilayered tape casting
31. Improvement of output performance of solid oxide fuel cell by optimizing the active anode functional layer10.1016/j.electacta.2018.12.078 ↗
32. Influence of pore formers on slurry composition and microstructure of tape cast supporting anodes for SOFCs10.1016/j.jeurceramsoc.2007.10.001 ↗
33. Studies of Solid Oxide Fuel Cell Electrode Evolution Using 3D Tomography10.1002/fuce.201200177 ↗
34. Understanding the processes governing performance and durability of solid oxide electrolysis cells10.1039/C5FD00032G ↗
35. Degradation of solid oxide electrolysis cells: phenomena, mechanisms, and emerging mitigation strategies—A review10.1016/j.jmst.2019.07.026 ↗
36. Tape casting of anode supports for solid oxide fuel cells at forschungszentrum jülich10.1111/j.1744-7402.2012.02839.x ↗
37. A low cost large-area solid oxide cells fabrication technology based on aqueous co-tape casting and co-sintering10.1002/fuce.201300212 ↗
38. Effect of processing parameters on the properties of freeze-cast Ni wick with gradient porosity10.1016/j.matdes.2021.109795 ↗
39. Experimental and numerical investigations for compressive behavior of porous hydroxyapatite bone scaffold fabricated via freeze-gel casting method10.1016/j.matdes.2023.112080 ↗
40. Multi-directional freeze casting of porous ceramics with bone-inspired microstructure10.1016/j.matdes.2022.111344 ↗
41. Fabrication and electrochemical modelling of 8YSZ and GDC10 freeze tape cast scaffolds for solid oxide cells (SOCs)10.1016/j.jeurceramsoc.2023.04.033 ↗
42. Fabrication of functionally graded and aligned porosity in thin ceramic substrates with the novel freeze–tape-casting process10.1111/j.1551-2916.2007.01720.x ↗
43. High performance low temperature solid oxide fuel cells with novel electrode architecture10.1039/c2ra21921b ↗
44. Tailoring the pore structure of cathode supports for improving the electrochemical performance of solid oxide fuel cells10.1007/s10832-018-0112-7 ↗
45. Micro-/nanohoneycomb solid oxide electrolysis cell anodes with ultralarge current tolerance10.1002/aenm.201802203 ↗
46. Microstructural and electrochemical properties of Ni-impregnated GDC10 and 8YSZ freeze tape cast scaffolds as fuel electrodes for solid oxide cells
47. Direct-methane solid oxide fuel cells with hierarchically porous Ni-based anode deposited with nanocatalyst layer10.1016/j.nanoen.2014.08.016 ↗
48. Low temperature solid oxide fuel cells with hierarchically porous cathode nano-network10.1016/j.nanoen.2014.05.010 ↗
49. Hierarchically oriented macroporous anode-supported solid oxide fuel cell with thin ceria electrolyte film10.1021/am5003662 ↗
50. Synthetical designing of solid oxide fuel cell electrodes: effect of particle size and volume fraction10.1016/j.ijhydene.2022.07.071 ↗
51. Modelling the 3D microstructure and performance of solid oxide fuel cell electrodes: computational parameters10.1016/j.electacta.2011.04.065 ↗
52. E. Effori, H. Moussaoui, F. Monaco, R.K. Sharma, J. Debayle, Y. Gavet, G. Delette, G. Si Larbi, E. Siebert, J. Vulliet, L. Dessemond, J. Laurencin, Reaction Mechanism and Impact of Microstructure on Performances for the LSCF-CGO Composite Electrode in Solid Oxide Cells, Fuel Cells 19(4) (2019) 429-444.10.1002/fuce.201800185 ↗
53. Development of a multiscale SOFC model and application to axially-graded electrode design10.1002/fuce.201800170 ↗
54. Impact of Nickel agglomeration on Solid Oxide Cell operated in fuel cell and electrolysis modes10.1016/j.jpowsour.2018.06.097 ↗
55. Impact of particle size ratio and volume fraction on effective material parameters and performance in solid oxide fuel cell electrodes10.1016/j.jpowsour.2012.05.014 ↗
56. Fabrication and characterization of graded anodes for anode-supported solid oxide fuel cells by tape casting and lamination10.1007/s12678-014-0193-2 ↗
57. Materials and manufacturing technologies for solid oxide fuel cells10.1007/s10853-010-4279-9 ↗
58. Microstructure and electrochemical characterization of solid oxide fuel cells fabricated by co-tape casting10.1016/j.jpowsour.2009.02.008 ↗
59. Study of (La, Sr)(Ti, Ni)O3-δ materials for symmetrical Solid Oxide Cell electrode - Part B: conditions of Ni exsolution10.1016/j.ceramint.2019.11.034 ↗
60. Nanoscale and nano-structured electrodes of solid oxide fuel cells by infiltration: advances and challenges10.1016/j.ijhydene.2011.09.067 ↗
61. Recent progress in nanostructured electrodes for solid oxide fuel cells deposited by spray pyrolysis10.1016/j.jpowsour.2021.230277 ↗
62. A critical review of the nano-structured electrodes of solid oxide cells10.1039/D2CC03877C ↗
63. Preparation of hydrogen electrodes of solid oxide cells by infiltration: effects of the preparation procedure on the resulting microstructure
64. Nano-tailoring of infiltrated catalysts for high-temperature solid oxide regenerative fuel cells10.1016/j.nanoen.2017.04.024 ↗
65. Advanced metal oxide infiltrated electrodes for boosting the performance of solid oxide cells10.1039/D1TA07902F ↗
66. Phase transition with in situ exsolution nanoparticles in the reduced Pr0.5Ba0.5Fe0.8Ni0.2O3−δ electrode for symmetric solid oxide cells10.1039/D2TA03395J ↗
67. Exsolution of phase-separated nanoparticles via trigger effect toward reversible solid oxide cell10.1016/j.apenergy.2022.119615 ↗
68. Calcium doping in double perovskite SmBa1−xCaxCo2O5+δ to enhance the electrochemical activity of solid oxide cell reversible oxygen electrode10.1016/j.jallcom.2022.167731 ↗
69. Impregnation of microporous SDC scaffold as stable solid oxide cell BSCF-based air electrode10.1016/j.energy.2021.121514 ↗
70. Engineering the solid oxide fuel cell electrocatalyst infiltration technique for industrial use10.1016/j.ijhydene.2016.06.015 ↗
71. A particle-based model for effective properties in infiltrated solid oxide fuel cell electrodes10.1149/2.0931412jes ↗
72. An effective property model for infiltrated electrodes in solid oxide fuel cells10.1149/2.036401jes ↗
73. High performance finite element simulations of infiltrated solid oxide fuel cell cathode microstructures10.1016/j.jpowsour.2022.231652 ↗
74. Geometric properties of nanostructured solid oxide fuel cell electrodes10.1149/2.057303jes ↗
75. Holotomography: quantitative phase tomography with micrometer resolution using hard synchrotron radiation x rays10.1063/1.125225 ↗
76. Role of microstructure on electrode operating mechanisms for mixed ionic electronic conductors: from synchrotron-based 3D reconstruction to electrochemical modeling10.1016/j.ssi.2016.07.001 ↗
77. Efficient correction of wavefront inhomogeneities in X-ray holographic nanotomography by random sample displacement10.1063/1.5026462 ↗
78. Particle-based model for functional and diffusion layers of solid oxide cells electrodes10.1016/j.powtec.2020.03.040 ↗
79. Characterisation of Solid Oxide Fuel Cell Ni–8YSZ substrate by synchrotron X-ray nano-tomography: from 3D reconstruction to microstructure quantification10.1016/j.jpowsour.2011.09.105 ↗
80. Electrode kinetics of porous Ni-3YSZ cermet operated in fuel cell and electrolysis modes for solid oxide cell application10.1016/j.electacta.2021.138765 ↗
81. Freeze casting of porous materials: review of critical factors in microstructure evolution10.1179/1743280411Y.0000000011 ↗
82. A novel electrolyte-electrode interface structure with directional micro-channel fabricated by freeze casting: A minireview10.1016/j.ijhydene.2017.06.224 ↗
83. A Threshold Selection Method from Gray-Level Histograms10.1109/TSMC.1979.4310076 ↗
84. Freeze-casting for the fabrication of solid oxide fuel cells: A review10.1016/j.mtla.2018.07.005 ↗
85. Freeze casting – A review of processing, microstructure and properties via the open data repository, FreezeCasting.net10.1016/j.pmatsci.2018.01.001 ↗
86. Stochastic geometrical modeling of solid oxide cells electrodes validated on 3D reconstructions10.1016/j.commatsci.2017.11.015 ↗
87. The application of hierarchical structures in energy devices: new insights into the design of solid oxide fuel cells with enhanced mass transport10.1039/C8EE01064A ↗
88. 3D Characterization of diffusivities and its impact on mass flux and concentration overpotential in SOFC Anode10.1149/2.0111704jes ↗
89. Investigation of the active thickness of solid oxide fuel cell electrodes using a 3D microstructure model10.1016/j.electacta.2011.06.105 ↗
90. Investigation of the electrochemical active thickness of solid oxide fuel cell anode10.1016/j.ijhydene.2014.06.108 ↗
91. A high-performance Co-free electrode for solid oxide cells: La0.7Sr0.3Cu0.15Fe0.85O3-δ synthesis and characterisation10.1016/j.jallcom.2023.171334 ↗
92. Pd-YSZ composite cathodes for oxygen reduction reaction of intermediate-temperature solid oxide fuel cells10.1016/j.ijhydene.2011.03.132 ↗
93. Kinetics of Oxidation of H2 and Reduction of H2O in Ni-YSZ based Solid Oxide Cells10.1149/05049.0167ecst ↗
94. Effective modulus and coefficient of thermal expansion of Ni–YSZ porous cermets10.1016/j.jpowsour.2008.03.035 ↗
95. Impact of microstructure and polarization on the degradation of Ni-YSZ electrode: an experimental and modeling approach10.1149/09101.0653ecst ↗
96. Infiltration of nickel and copper catalysts into a GDC backbone assisted by supercritical CO2 for efficient SOFC anodes10.1039/D2SE00251E ↗
97. LSM-YSZ Cathodes with Reaction-Infiltrated Nanoparticles10.1149/1.2192733 ↗
98. Validation of a physically-based solid oxide fuel cell anode model combining 3D tomography and impedance spectroscopy10.1016/j.ijhydene.2016.09.100 ↗
99. Numerical microstructural optimization for the hydrogen electrode of solid oxide cells10.1002/fuce.202300029 ↗
100. Effect of the anode microstructure on the enhanced performance of solid oxide fuel cells10.1016/j.ijhydene.2012.05.007 ↗