journal article·2026-03Open access

Compositionally grading alloy stacking fault energy using autonomous path planning and additive manufacturing with elemental powders

James Hanagan, Nicole Person, Daniel Salas, Marshall Allen, Wenle Xu, Daniel Lewis, Cafer Acemi, Brady Butler, James D. Paramore, George M. Pharr, Ibrahim Karaman, Raymundo Arróyave

Materials & Design· Volume 263

Abstract

Whereas compositionally graded alloys (CGAs) are often proposed for use in structural components where the combination of alloys within a single part can substantially improve performance, this work proposes and demonstrates the rapid design, synthesis, and characterization of CGAs for the purpose of alloy space exploration. To illustrate this, a composition gradient in the CoCrFeNi alloy space was planned between the maximum and minimum stacking fault energy (SFE) predicted by an existing state-of-the-art machine learning model. One of the goals of this study was to investigate the applicability of this model on a large range of output values and compositions. The compositional gradient path was designed to be monotonic in the SFE and to avoid regions that did not meet constraints predicted via CALculation of PHase Diagrams (CALPHAD). Compositions were selected to produce a linear gradient in SFE and built using laser directed energy deposition (L-DED) with elemental powders. The resulting gradient was characterized for microstructure and mechanical properties, including hardness, elastic modulus, and strain rate sensitivity. More broadly, the results of this investigation demonstrate the ability of the methods employed to expose blind spots in alloy models and gain knowledge about alloy design spaces in a high-throughput manner. • Compositionally graded alloys for rapid alloy design space exploration. • Case study: stacking fault energy gradient in the CoCrFeNi alloy space. • Gradient designed with robotics-inspired path planning approach. • Graded sample fabricated via laser directed energy deposition with elemental powders. • Methods rapidly test alloy models and expose predictive blind spots.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (70)

Show source-provided references
1. High-throughput rapid experimental alloy development (HT-READ)10.1016/j.actamat.2021.117352 ↗
2. High-throughput synthesis of Mo-Nb-Ta-W high-entropy alloys via additive manufacturing10.1016/j.matdes.2019.108358 ↗
3. High-throughput synthesis and characterization of a combinatorial materials library in bulk alloys10.1007/s11661-021-06149-0 ↗
4. Multi-objective, multi-constraint high-throughput design, synthesis, and characterization of tungsten-containing refractory multi-principal element alloys10.1016/j.actamat.2024.120379 ↗
5. Design of high-temperature nicutihf shape memory alloys with minimum thermal hysteresis using Bayesian optimization
6. Illustrating an effective workflow for accelerated materials discovery
7. Data-augmented modeling for yield strength of refractory high entropy alloys: a Bayesian approach10.1016/j.actamat.2023.119351 ↗
8. High-throughput exploration of the WMoVTaNbAl refractory multi-principal-element alloys under multiple-property constraints10.1016/j.actamat.2023.118784 ↗
9. Stacking fault energy in concentrated alloys10.1038/s41467-021-23860-z ↗
10. Generalized stacking fault energies, ductilities, and twinnabilities of CoCrFeNi-based face-centered cubic high entropy alloys10.1016/j.scriptamat.2017.06.014 ↗
11. High strength fe–mn–(al, SI) trip/twip steels development—properties—application10.1016/S0749-6419(00)00015-2 ↗
12. Tailoring stacking fault energy for high ductility and high strength in ultrafine grained Cu and its alloy10.1063/1.2356310 ↗
13. Twinning-induced plasticity (TWIP) steels10.1016/j.actamat.2017.06.046 ↗
14. Correlation between stacking fault energy and deformation microstructure in high-interstitial-alloyed austenitic steels10.1016/j.actamat.2010.01.056 ↗
15. Competing mechanisms and modeling of deformation in austenitic stainless steel single crystals with and without nitrogen10.1016/S1359-6454(01)00296-8 ↗
16. Deformation of single crystal hadfield steel by twinning and slip10.1016/S1359-6454(99)00383-3 ↗
17. Modeling the deformation behavior of hadfield steel single and polycrystals due to twinning and slip10.1016/S1359-6454(00)00051-3 ↗
18. Effect of martensitic phase transformation and deformation twinning on mechanical properties of Fe–Mn–Si–Al steels10.1179/mst.1998.14.12.1213 ↗
19. Orientation dependence of the effect of short-range ordering on the plastic deformation of a medium entropy alloy10.1016/j.msea.2023.145309 ↗
20. Towards stacking fault energy engineering in FCC high entropy alloys10.1016/j.actamat.2021.117472 ↗
21. Additive manufacturing of a functionally graded material from ti-6al-4v to Invar: experimental characterization and thermodynamic calculations10.1016/j.actamat.2016.12.070 ↗
22. Functionally graded material of 304L stainless steel and inconel 625 fabricated by directed energy deposition: characterization and thermodynamic modeling10.1016/j.actamat.2016.02.019 ↗
23. Additive fabrication of 316L/Inconel625/Ti6Al4V functionally graded materials by laser synchronous preheating10.1007/s00170-019-04061-x ↗
24. Compositionally graded metals: a new frontier of additive manufacturing10.1557/jmr.2014.208 ↗
25. Design of an additively manufactured functionally graded material of 316 stainless steel and Ti-6Al-4V with Ni-20Cr, Cr, and V intermediate compositions
26. Computational design of gradient paths in additively manufactured functionally graded materials
27. Computational design of compositionally graded alloys for property monotonicity
28. Functionally graded materials through robotics-inspired path planning10.1016/j.matdes.2019.107975 ↗
29. Sampling-based algorithms for optimal motion planning10.1177/0278364911406761 ↗
30. Rapidly-exploring random tree based memory efficient motion planning
31. A Subspace-Inclusive sampling method for the computational design of compositionally graded alloys
32. Uncertainty-aware process-property mapping in laser directed energy deposition of 316L stainless steel
33. Thermo-Calc Software TCHEA High Entropy Alloys Database version 4 (accessed July 2022), https://thermocalc.com/products/databases/high-entropy-alloys/.
34. TCHEA1: a thermodynamic database not limited for “high entropy” alloys10.1007/s11669-017-0570-7 ↗
35. Can experiment determine the stacking fault energy of metastable alloys?10.1016/j.matdes.2020.109396 ↗
36. Development of a process optimization framework for fabricating fully dense advanced high strength steels using laser directed energy deposition
37. A process optimization framework for laser direct energy deposition: densification, microstructure, and mechanical properties of an FeCr alloy10.1016/j.jmapro.2022.11.028 ↗
38. Integrated modeling to control vaporization-induced composition change during additive manufacturing of nickel-based superalloys10.1038/s41524-024-01418-z ↗
39. 2024
40. 2015
41. Advanced nanoindentation testing for studying strain-rate sensitivity and activation volume10.1007/s11837-017-2536-y ↗
42. Indentation power-law creep of high-purity indium10.1007/s11661-999-0051-7 ↗
43. 2023
44. Embedding hidden information in additively manufactured metals via magnetic property grading for traceability
45. Phase diagram of the order-disorder transition in Ni3Fe10.1016/0001-6160(81)90016-X ↗
46. Lattice parameter of ferritic and martensitic Fe-Ni alloys10.1007/BF02811785 ↗
47. A revision of the Fe-Ni phase diagram at low temperatures (<400 ∘c)10.1007/BF02665999 ↗
48. Hansen · 1958
49. Local maxima in martensite start temperatures in the transition region between lath and plate martensite in Fe-Ni alloys10.3390/ma16041549 ↗
50. Thermomechanical characterization of ni-rich niti fabricated by selective laser melting10.1088/0964-1726/25/3/035005 ↗
51. Spatial control of functional response in 4D-printed active metallic structures
52. Phase transformations in Fe–Ni system at mechanical alloying and consequent annealing of elemental powder mixtures10.1016/S0921-4526(01)00473-2 ↗
53. Callister · 2014
54. Influence of retained austenite on the mechanical properties of low carbon martensitic stainless steel castings
55. Revisiting the structure of martensite in iron-carbon steels
56. Effect of austenitizing heat treatment on the microstructure and hardness of martensitic stainless steel AISI 42010.1007/s11665-011-0043-9 ↗
57. Nickel and nickel alloys
58. Multiresolution mechanical characterization of hierarchical materials: spherical nanoindentation on martensitic fe-ni-c steels10.1016/j.actamat.2018.04.063 ↗
59. The origin of negative stacking fault energies and nano-twin formation in face-centered cubic high entropy alloys10.1016/j.scriptamat.2016.11.014 ↗
60. Stacking fault energy in concentrated alloys10.1038/s41467-021-23860-z ↗
61. Strain-rate sensitivity, activation volume and mobile dislocations exhaustion rate in nanocrystalline Cu–11.1 at% al alloy with low stacking fault energy10.1016/j.msea.2014.05.093 ↗
62. Elastic properties of metals and alloys, I. Iron, nickel, and Iron-Nickel alloys10.1063/1.3253127 ↗
63. Low young’s modulus in Ti-Nb-Ta-Zr-O alloys: cold working and oxygen effects10.1016/j.actamat.2011.07.050 ↗
64. A comparative study of elastic constants of Ti-Ni-based alloys prior to martensitic transformation10.1016/S0921-5093(00)01876-1 ↗
65. Elastic constants of Ti50Ni30Cu20 alloy prior to martensitic transformation10.1080/01418619908214272 ↗
66. Understanding the martensitic transformations in TiNi-based alloys by elastic constants measurement10.1016/S0921-5093(99)00368-8 ↗
67. Elastic softening behavior of Ti-Nb single crystal near martensitic transformation temperature10.1063/1.3486212 ↗
68. Study by resonant ultrasound spectroscopy of the elastic constants of theβphase in Cu-Al-Ni shape memory alloys10.1016/j.msea.2003.06.004 ↗
69. Temperature dependence of elastic properties in austenite and martensite of Ni-Mn-Ga epitaxial films10.1016/j.actamat.2017.12.011 ↗
70. Combined effect of structural softening and magneto-elastic coupling on elastic coefficients of NiMnGa austenite10.1016/j.jallcom.2012.01.007 ↗