journal article·2026-03Open access

Improvement of transmittance homogeneity via coating anti-Gaussian chromium films on tapered optical fibre arrays

Yuwen Xing, Juan Liu, Yonggang Huang, Peng Jiao, Yajie Du, Weiwei Cao, Pan Shi, Le Chang, Zhili He, Jinsheng Jia

Materials & Design· Volume 263

Abstract

The transmittance inhomogeneity of Tapered Optical Fibre Arrays (TOFAs) is well-recognized to attenuate edge signal, reduce detective sensitivity and compress dynamic response range. A radial depth-varied coating scheme based on a ‘transmittance-film thickness’ digital correlation model was proposed to improve the transmittance inhomogeneity of TOFA. Considering the characteristic that TOFAs exhibit a Gaussian distribution in their inherent transmittance, a volute mask with spiral gradient openings was first designed. This mask was then integrated with a self-developed rotating coating device to build a dynamically coordinated deposition system. The anti-Gaussian films was successfully fabricated by the integrated depositing system. The microscopic characterization by TEM and SEM illustrates the nonlinear and precise control on the thickness of the metallic chromium film from the center to the edge. The experimental results show the transmittance inhomogeneity of TOFAs coated by anti-Gaussian film is decreased from originally ranging from 4.21% to 11.872% to a minimum of 1.422%. It is confirmed that the prepared high-quality anti-Gaussian film effectively compensate transmittance.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Fiber Optic Sensors · Optical Coatings and Gratings · Photonic Crystal and Fiber Optics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Taking a look at the calibration of a CCD detector with a fiber-optic taper10.1107/S1600576716000431 ↗
2. Charge-coupled-device fiber optic taper array x-ray detector for protein crystallography
3. Wide-field lensless fluorescent microscopy using a tapered fiber-optic faceplate on a chip10.1039/c0an00926a ↗
4. Comparison of lens and fiber-coupled CCD detectorsfor X-ray computed tomography10.1107/S0909049510044523 ↗
5. Wide-field-of-view optical detectors using fused fiber-optic tapers10.1364/OL.423437 ↗
6. Calibration of imaging sensor and fiber optic taper-caused distortion in an X-Ray intensified CMOS camera10.1109/ACCESS.2019.2960259 ↗
7. Optical fiber taper coupling and high-resolution wavelength tuning of microdisk resonators at cryogenic temperatures10.1063/1.2431719 ↗
8. Calibration of imaging sensor and fiber optic taper-caused distortion in an X-ray intensified CMOS camera10.1109/ACCESS.2019.2960259 ↗
9. Unlocking high spatial resolution in neutron imaging through an add-on fibre optics taper10.1364/OE.26.001809 ↗
10. O. Adriani , G. Ambrosi , M. Antonelli ,et al.Performance assessment of the HERD calorimeter with a photo-diode read-out system for high-energy electron beams. 2024. DOI:10.1088/1748-0221/20/02/P02015.10.1088/1748-0221/20/02/P02015 ↗
11. The plastic scintillator detector for the future High Energy cosmic-radiation detection facility on board the chinese space station
12. C. Perrina. The future of the high energy cosmic ray detection: HERD. EPJ Web of Conferences, 2019,209:01040-1-7. DOI:10.1051/EPJCONF/201920901040.10.1051/epjconf/201920901040 ↗
13. In-line variable optical attenuator based on the bending of the tapered single mode fiber10.3807/JOSK.2009.13.3.349 ↗
14. Quantifying loss minimisation in single-mode fibre tapers10.1049/el:19860622 ↗
15. Optical gradient waveguides in photo-thermo-refractive glass formed by ion exchange method10.1109/JLT.2015.2456239 ↗
16. Stress in copper ion-exchanged glass waveguides10.1109/50.754790 ↗
17. Graded-reflectance mirrors for beam quality control in laser resonators10.1364/AO.32.001145 ↗
18. Effects of hard apertures on mode properties of resonators with gaussian reflectivity mirrors10.1109/JQE.1987.1073322 ↗
19. Fabrication and characterization of tuned Gaussian mirrors for the visible and the near infrared10.1364/OL.13.000342 ↗
20. Design of optical fiber path for tapered optical fiber array and improvement of light transmission uniformity10.1016/j.yofte.2022.103149 ↗
21. An investigation of optical transmission trajectories in single tapered fibers of TOFA by numerical simulation and experimental verification10.1016/j.yofte.2024.103883 ↗
22. Float glass surface preparation methods for improved chromium film adhesive bonding
23. Design of baffle and vacuum plating for gradient filter chromium film
24. Tu · 1965 · 47