Design, properties, and weldability of advanced oxidation-resistant FeCrAl alloys
Source abstract
Abstract
Abstract Iron-chromium-aluminum (FeCrAl) alloys are promising as corrosion- and oxidation-resistant materials for high-temperature applications. However, further design and improvement of FeCrAl-based materials require a delicate balance between workability, weldability, and a propensity for α′-phase formation. Here, a series of advanced oxidation-resistant FeCrAl alloys were produced and investigated. FeCrAl variants with aluminum (+ 2%), niobium (+ 1%), and titanium carbide (+ 0.1%, + 0.3%, and + 1%) additions were characterized in detail before and after controlled laser-beam welding; tensile tests with digital image correlation, scanning electron microscopy-electron back scattered diffraction analysis, and fractography analysis were conducted. All investigated alloys demonstrated a yield stress of over 500 MPa in the weldment; no welding-induced cracking was observed. However, it was shown that increasing the aluminum content to over 5% was detrimental to the material's integrity, leading to a brittle fracture mechanism and decreased ductility in the weldment. At the same time, the niobium and titanium carbide additions helped prevent grain growth and reduce local softening (yield stress reduction) in the heat-affected zone. The 1% titanium carbide addition also effectively refined grain size in the weldment.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nuclear Materials and Properties · High Temperature Alloys and Creep · Fusion materials and technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Comparative evaluation of grain refinement in {AISI} 430 {FSS} welds by elemental metal powder addition and cryogenic cooling10.1016/j.matdes.2011.09.066 ↗
2. The effect of repeated repair welding on mechanical and corrosion properties of stainless steel 316L10.1016/j.matdes.2013.08.052 ↗
3. Accident tolerant fuels for LWRs: a perspective10.1016/j.jnucmat.2013.12.005 ↗
4. Design of alumina forming FeCrAl steels for lead or lead–bismuth cooled fast reactors10.1016/j.jnucmat.2012.04.006 ↗
5. Material selection for accident tolerant fuel cladding
6. A study of early corrosion behaviors of FeCrAl alloys in liquid lead–bismuth eutectic environments10.1016/j.jnucmat.2010.10.018 ↗
7. High temperature oxidation of FeCrAl-alloys–influence of Al-concentration on oxide layer characteristics10.1002/maco.200805186 ↗
8. Effect of steam on high temperature oxidation behaviour of alumina-forming alloys10.1179/0960340914Z.00000000058 ↗
9. Nanocavity formation and hardness increase by dual ion beam irradiation of oxide dispersion strengthened FeCrAl alloy10.1016/j.jnucmat.2012.04.029 ↗
10. Void-swelling in irons and ferritic steels: II. An experimental survey of materials irradiated in a fast reactor10.1016/0022-3115(79)90123-5 ↗
11. Deformation behavior of laser welds in high temperature oxidation resistant Fe–Cr–Al alloys for fuel cladding applications10.1016/j.jnucmat.2014.08.013 ↗
12. Chubb · 1958
13. The effect of chromium on the weldability and microstructure of Fe-Cr-Al weld cladding
14. Improving the weldability of fecral weld overlay coatings
15. In situ observations of weld pool solidification using transparent metal-analog systems10.1063/1.1559934 ↗
16. Modeling of fundamental phenomena in welds10.1088/0965-0393/3/2/009 ↗
17. Spatially resolved materials property data from a uniaxial cross-weld tensile test10.1115/1.4000196 ↗
18. Irradiation-enhanced α′ precipitation in model FeCrAl alloys10.1016/j.scriptamat.2016.02.002 ↗
19. Microstructural stability of Fe–Cr–Al alloys at 450–550°C10.1016/j.jnucmat.2014.11.101 ↗
20. Radiation tolerance of neutron-irradiated model Fe–Cr–Al alloys10.1016/j.jnucmat.2015.06.023 ↗
21. Mapping of 475 C embrittlement in ferritic Fe–Cr–Al alloys10.1016/j.scriptamat.2010.08.015 ↗
22. Review of stabilisation of ferritic stainless steels10.1179/mst.1996.12.2.126 ↗
23. Effects of niobium and heat treatment on microstructure and mechanical properties of low carbon cast steels10.1016/j.matdes.2016.05.057 ↗
24. Nb segregation at prior austenite grain boundaries and defects in high strength low alloy steel during cooling10.1016/j.matdes.2016.11.017 ↗
25. Development and property evaluation of nuclear grade wrought FeCrAl fuel cladding for light water reactors10.1016/j.jnucmat.2015.10.019 ↗
26. Suppression of grain refinement in heat-affected zone of 9Cr–3W–3Co–VNb steels10.1016/j.msea.2015.12.095 ↗
27. Ultra-high purity metals. II. Effect of trace amounts of carbon and nitrogen on the high temperature oxidation resistance of high purity FeCrAl alloys10.2320/matertrans.43.168 ↗
28. Experimental observations in support of the dynamic-segregation theory to explain the reactive-element effect10.1007/BF01046818 ↗
29. Sutton · 2009
30. In situ observation of strain and phase transformation in plastically deformed 301 austenitic stainless steel10.1016/j.matdes.2016.09.057 ↗
31. Fatigue behavior of {IN718} microtrusses produced via additive manufacturing10.1016/j.matdes.2016.05.032 ↗
32. Determination of local constitutive properties of aluminium friction stir welds using digital image correlation10.1016/j.matdes.2011.07.009 ↗
33. Experimental and numerical study of strength mismatch in cross-weld tensile testing10.1177/0309324715593699 ↗
34. Effect of coarse grain band on the ridging severity of 409L ferritic stainless steel10.1016/j.matdes.2016.05.100 ↗
35. On the characterization of recrystallized fraction using electron backscatter diffraction: a direct comparison to local hardness in an {IF} steel using nanoindentation10.1016/j.msea.2010.08.063 ↗
36. Orientation selective recrystallization of nonoriented electrical steels10.1007/BF02651889 ↗
37. Texture evolution during the recrystallization of a warm-rolled low-carbon steel10.1016/j.actamat.2006.02.050 ↗
38. Description of strain hardening behavior in neutron-irradiated fcc metals10.1016/j.jnucmat.2012.04.017 ↗
39. Crystal plasticity investigation of the microstructural factors influencing dislocation channeling in a model irradiated bcc material10.1016/j.actamat.2016.03.041 ↗
40. Evolution of microstructure and mechanical properties of a dissimilar aluminium alloy weldment10.1016/j.matdes.2015.10.134 ↗
41. Microstructure characterization and hardness distribution of 13Cr4Ni multipass weld metal10.1016/j.matchar.2015.11.022 ↗
42. Microstructure of a safe-end dissimilar metal weld joint (SA508-52-316L) prepared by narrow-gap GTAW10.1016/j.matchar.2016.11.029 ↗
43. Role of scale factor during tensile testing of small specimens
44. Experiment-based regional characterization of HAZ mechanical properties for laser welding10.1007/s00170-014-6762-y ↗
45. Characterization of gas metal arc welding welds obtained with new high Cr–Mo ferritic stainless steel filler wires10.1016/j.matdes.2013.04.054 ↗
46. Dramatically enhanced impact toughness in welded ultra-ferritic stainless steel by additional nitrogen gas in Ar-based shielding gas10.1557/jmr.2016.379 ↗
47. An experimental study of nitrogen gas influence on the 443 ferritic stainless steel joints by double-shielded welding