Property relations based on the octahedral structure model with body-centered cubic mode for porous metal foams
Source abstract
Abstract
Three-dimensional reticular metal foam is a porous material with excellent comprehensive performance for a wide engineering application. For these porous materials, our investigations on the octahedral structure model with body-centered cubic mode are comprehensively and systemically introduced, as well as the relevant physical models and characterized expressions for their basically physical and mechanical properties. The content relates to the tension, bending, torsion, shearing, fatigue, conduction, specific surface area and multiaxial tension-compression of the porous materials, including the electrical resistivity, tensile strength, elongation rate, elastic modulus, biaxial tension, multiaxial tension-compression, fatigue and specific surface area calculation, as well as the bending, torsion and shearing. From this structural model, a series of analytical models have been derived for the properties of these materials, and resultantly, a number of property relations can be deduced. These researches are well coherent, consistent and systematical, and the theoretical results have been verified to show good practicability by the experiment with the samples produced together with the large-scale production line in a specialized corporation. It can be quite expectant that these works have a good guidance or consultant function to design the material sort selection, preparation process optimization and final performance for this kind of porous materials.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Cellular and Composite Structures · Pickering emulsions and particle stabilization · Nanoporous metals and alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Functional materials of porous metals made by P/M, electroplating and some other techniques10.1023/A:1012483920628 ↗
2. Porous materials with a difference10.1126/science.1078560 ↗
3. Porous metals and metallic foams: current status and recent developments10.1002/adem.200800241 ↗
4. Liu · 2014
5. Solid state porous metal production: a review of the capabilities, characteristics, and challenges10.1002/adem.201700766 ↗
6. Gibson · 1999
7. Microstructure-based experimental and numerical investigations on the sound absorption property of open-cell metallic foams manufactured by a template replication technique10.1016/j.matdes.2017.10.016 ↗
8. Chapter 3: porous materials
9. High temperature compression properties of open-cell Ni-20Cr foams produced by impregnation10.1016/j.matdes.2015.06.167 ↗
10. Effects of calcium on mechanical properties of cellular Al-Cu foams10.1016/j.msea.2014.09.051 ↗
11. Failure by buckling mode of the pore-strut for isotropic three-dimensional reticulated porous metal foams under different compressive loads10.1016/j.matdes.2010.11.073 ↗
12. Fabrication of graded porous titanium-magnesium composite for load-bearing biomedical applications10.1016/j.matdes.2014.12.001 ↗
13. Modeling failure modes of isotropic three-dimensional reticulated porous metal foams under several typical loads10.1016/j.matdes.2011.06.029 ↗
14. Compression behavior of Ti foams with spherical and polyhedral pores10.1002/adem.201600169 ↗
15. Sound absorption performance of various nickel foam-base multi-layer structures in range of low frequency10.1016/S1003-6326(17)60223-1 ↗
16. EMI shielding and thermal conductivity of a high porosity reticular titanium foam10.1016/j.matdes.2015.12.105 ↗
17. Sound absorption characterization of aluminum foam made by press infiltration casting10.1108/MMMS-03-2016-0010 ↗
18. Development of a porous metallic femoral stem: design, manufacturing, simulation and mechanical testing10.1016/j.matdes.2016.10.064 ↗
19. Sound absorption of several various nickel foam multilayer structures at aural frequencies sensitive for human ears10.1016/S1003-6326(18)64771-5 ↗
20. Macroscopic fracture behavior of nickel foam under tension10.1108/MMMS-05-2015-0025 ↗
21. Benefits of metal foams and developments in modelling techniques to assess their materials behaviour: a review10.1179/026708311X13135950699290 ↗
22. Simplified fractal FEA model for the estimation of the Young’s modulus of Ti foams obtained by powder metallurgy10.1016/j.matdes.2015.06.038 ↗
23. On the stability of Kelvin cell foams under compressive loads10.1016/j.jmps.2004.10.007 ↗
24. Microstructural characterization of metal foams: an examination of the applicability of the theoretical models for modeling foams10.1016/j.msea.2011.02.005 ↗
25. Calculation of apparent resistivity of metallic open cell foams by dodecahedron model10.1179/174328407X179683 ↗
26. Electrical conductivity of open-cell metal foams10.1557/JMR.2002.0089 ↗
27. Comments on “Electrical conductivity of open-cell metal foams” by K.P. Dharmasena and H.N.G. Wadley [J. Mater. Res. 17, 625 (2002)]10.1557/JMR.2008.0151 ↗
28. The effects of manufacturing parameters on geometrical and mechanical properties of copper foams produced by space holder technique10.1016/j.matdes.2013.07.047 ↗
29. Numerical modelling of open-cell metal foam with Kelvin cell10.1007/s40314-015-0217-4 ↗
30. Computational model of metal foam’s sound absorption
31. Compressive behavior of tailor-made metallic foams (TMFs): numerical simulation and statistical modeling10.1016/j.matdes.2015.06.116 ↗
32. Calculation of specific surface area of foam metals using dodecahedron model10.1179/174328406X111138 ↗
33. Relationship between electrical resistivity and porosity for porous materials10.1016/S0921-5093(99)00073-8 ↗
34. The tensile strength of porous metals with high porosity
35. Relationship between tensile strength and porosity for high porosity materials10.1007/BF02917065 ↗
36. Relationship between tensile strength and porosity for foamed metals under equal speed biaxial tension10.1179/026708303225004323 ↗
37. Relationship between elongation and porosity for high porosity metals
38. A new analytical model about the relationship between nominal failure stresses and porosity for foamed metals under biaxial tension10.1016/j.matdes.2006.10.018 ↗
39. Application of different theories to foamed metals under biaxial equal-stress tension10.1016/j.msea.2003.07.002 ↗
40. Mechanical relation of foamed metals under uniaxial and biaxial loads of collective tension and compression10.1016/j.msea.2008.11.059 ↗
41. Mechanical model of porous metal foams under multiaxial tensile loads10.1080/09500830903246276 ↗
42. Mechanical relation for porous metal foams under complex loads of triaxial tension and compression10.1016/j.matdes.2009.10.007 ↗
43. Ceramic foams by powder processing10.1016/S0955-2219(98)00063-6 ↗
44. Degischer · 2002
45. Fabrication methods of porous metals for use in orthopaedic applications10.1016/j.biomaterials.2005.12.002 ↗
46. Design, manufacture, and analysis of metal foam electrical resistance heater10.1016/j.ijmecsci.2006.05.006 ↗
47. Highly porous metals and ceramics10.1179/026708310X12756557336157 ↗
48. Analytical and numerical prediction of heat transfer and pressure drop in open-cell metal foams10.1016/j.ijthermalsci.2011.01.007 ↗
49. Reactive sintering of porous tungsten: a cost effective sustainable technique for the manufacturing of high current density cathodes to be used in flashlamps10.1016/j.jmatprotec.2005.05.037 ↗
50. A preparing method of a new porous tungsten foam
51. Preparation and corresponding structure of nickel foam10.1179/026708300101508108 ↗
52. Morphology and elastic properties of aluminum foams produced by a casting technique10.1016/S1359-6462(98)00090-6 ↗
53. http://www.ergaerospace.com [OL], 2012.
54. Preparation of high porosity metal foams10.1007/s11663-000-0021-3 ↗
55. Tensile fracture behavior of foamed metallic materials properties
56. Fracture toughness of brittle cellular solids10.1016/0036-9748(84)90510-6 ↗
57. Failure surfaces for cellular materials under multiaxial loads: I. Modelling10.1016/S0020-7403(89)80001-3 ↗
58. Failure surfaces for cellular materials under multiaxial loads: II. Comparison of models with experiment10.1016/S0020-7403(89)80002-5 ↗
59. Multiaxial failure criteria for brittle foams10.1016/0020-7403(90)90154-B ↗
60. Compressive and tensile behavior of aluminum foams10.1016/S0921-5093(99)00170-7 ↗
61. Creep-buckling of cellular solids10.1016/S1359-6454(00)00139-7 ↗
62. Failure of aluminum foams under multiaxial loads10.1016/S0020-7403(99)00043-0 ↗
63. Flow-through and flow-by porous electrodes of nickel foam: material characterization10.1007/BF01039388 ↗
64. ASM (American Society for Metals) · 1994 · vol.2
65. Evaluating electrical resistivity for high porosity metals10.1179/026708300101507758 ↗
66. Relationship between apparent electrical-conductivity and preparation conditions for nickel foam10.1023/A:1004095410450 ↗
67. Powder metallurgical near-net-shape fabrication of porous NiTi shape memory alloys for use as long-term implants by the combination of the metal injection molding process with the space-holder technique10.1002/adem.200900168 ↗
68. Microstructure and wear behavior of a porous nanocrystalline nickel-free austenitic stainless steel developed by powder metallurgy10.1016/j.matdes.2009.10.008 ↗
69. Thought about the exponential item in formulas calculating tensile strength for high-porosity materials10.1016/S0261-3069(02)00010-9 ↗
70. Tensile properties of open-cell nickel foams10.1016/j.matdes.2009.10.018 ↗
71. Babjak · 1990
72. Relationship between tensile strength and preparation conditions for nickel foam10.1179/026708301101511194 ↗
73. Correction between mechanical properties and porosity of sintered iron and steels—a review
74. Huang · 1997
75. Effect of tensile testing factors on mechanical properties of fine wire
76. Liu · 1986
77. Gong · 1999
78. Isotropic constitutive models for metallic foams10.1016/S0022-5096(99)00082-4 ↗
79. Approximate means for evaluating tensile strength of high porosity materials
80. Relationship between fracturing nominal stress and porosity for metal foams under biaxial tension10.1360/02ye0524 ↗
81. Effect of preparation conditions on relative elongation of nickel foam10.1179/026708304225012260 ↗
82. Ashby · 2000
83. Mechanical analysis and microstructural characterisation of metal foams10.1179/026708302225002056 ↗
84. Investigation on Young’s modulus and Poisson ratio of foamed metals10.1179/174328409X430528 ↗
85. Failure mode of isotropic three-dimensional reticulated porous materials under various compressive loads10.1080/09500839.2010.510449 ↗
86. Analysis of shearing failure mode for porous materials under compression10.7498/aps.59.4849 ↗
87. Mechanical properties and osteoconductivity of porous bioactive titanium10.1016/j.biomaterials.2005.03.019 ↗
88. Structure, metallurgy and mechanical properties of a porous tantalum foam10.1002/1097-4636(2001)58:2<180::AID-JBM1005>3.0.CO;2-5 ↗
89. Mechanical properties of porous titanium compacts prepared by powder sintering10.1016/j.scriptamat.2003.08.018 ↗
90. Deduction and analysis on mechanical relationship of porous open-cell metal foams under shearing loads
91. Mechanical relations for porous metal foams under several typical loads of shearing, torsion and bending10.1016/j.msea.2010.08.027 ↗
92. Characterization of porous open-cell metal foams under torsion
93. Fan · 2012
94. Analysis of porous open-cell metal foams under bending moment
95. Possible failure of pore-strut for open-cell foamed metals under torsion and shearing
96. Analyses of buckling failure mode for porous materials10.7498/aps.59.8801 ↗
97. Investigation on fatigue property of three-dimensional reticulated porous metal foams10.1179/1743284711Y.0000000111 ↗
98. Chen · 2002
99. Xu · 1988
100. Fatigue behavior, strength, and failure of aluminum foam10.1002/(SICI)1527-2648(200004)2:4<215::AID-ADEM215>3.0.CO;2-F ↗