Structural optimization of re-entrant negative Poisson's ratio structure fabricated by selective laser melting
Source abstract
Abstract
Abstract In this paper, a quantitative optimization of a modified re-entrant negative Poisson's ratio (NPR) structure whose overhanging struts were replaced with inclined ones to avoid the support structures which were generally required in the selective laser melting (SLM) process was carried out using finite element analysis (FEA) method. Poisson's ratios of models with inclined links of different strut inclination angles were calculated. The optimal simulated inclination angle of struts was 9° and the corresponding optimum re-entrant angle was 79° while the thickness of the strut was 0.9 mm. The influence of fillet radii on Poisson's ratio and stress concentration was also discussed and the Poisson's ratio decreased and the stress concentration phenomenon remitted to some extent with increased fillet radii. In order to verify the improvement of the manufacturability of structures with inclined links, AlSi10Mg specimens were fabricated by SLM process using different scanning speeds and compression tests were also developed. Experimentally obtained results and simulation predicted ones were in good agreement. Therefore, the custom-tailor service could be accomplished in this way and the modified NPR structure with better surface quality could be obtained.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Manufacturing Process and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Impact resistance of uniform and functionally graded auxetic double arrowhead honeycombs10.1016/j.ijimpeng.2015.04.005 ↗
2. Elasto-static micropolar behavior of a chiral auxetic lattice10.1016/j.jmps.2011.09.012 ↗
3. Flatwise buckling optimization of hexachiral and tetrachiral honeycombs10.1016/j.compscitech.2009.10.022 ↗
4. Mechanical metamaterials with 3D compliant porous structures10.1016/j.compstruct.2015.06.060 ↗
5. Homogenization of periodic auxetic materials10.1016/j.proeng.2011.04.307 ↗
6. Metamaterial and auxetic hybrid composite antennas, antenna technology small antennas and novel metamaterials
7. Deformation behaviors of three-dimensional auxetic spacer fabrics10.1177/0040517514521120 ↗
8. Gibson · 1999
9. Negative Poisson's ratio for extreme states of matter10.1126/science.288.5473.2018 ↗
10. How does negative Poisson's ratio of foam filler affect crashwothiness10.1016/j.matdes.2015.05.050 ↗
11. Auxetic materials: functional materials and structures from lateral thinking10.1002/(SICI)1521-4095(200005)12:9<617::AID-ADMA617>3.0.CO;2-3 ↗
12. The strain dependent indentation resilience of auxetic microporous polyethylene10.1023/A:1004830103411 ↗
13. Fracture toughness of re-entrant foam materials with a negative Poisson's ratio: experiment and analysis10.1007/BF00036481 ↗
14. Laser additive manufacturing of ultrafine TiC particle reinforced Inconel 625 based composite parts: tailored microstructures and enhanced performance10.1016/j.msea.2015.03.043 ↗
15. Microstructure evolution and behavior of CP Ti parts elaborated by self-developed vacuum selective laser melting system10.1016/j.apsusc.2013.04.090 ↗
16. Materials creation adds new dimensions to 3D printing10.1007/s11434-016-1191-y ↗
17. Gu · 2015
18. Laser additive manufacturing of metallic components: materials, processes and mechanisms10.1179/1743280411Y.0000000014 ↗
19. Densification behavior, microstructure evolution, and wear performance of selective laser melting processed commercially pure titanium10.1016/j.actamat.2012.04.006 ↗
20. Selective laser melting (SLM) of AlSi12Mg lattice structures10.1016/j.matdes.2016.02.127 ↗
21. The key metallurgical features of selective laser melting of stainless steel powder for building metallic part10.1007/s11106-011-9311-3 ↗
22. Segregation in cast products10.1007/BF02728476 ↗
23. Auxetic cellular structures through selective electron-beam melting10.1002/pssb.200945513 ↗
24. Role of molten pool mode on formability, microstructure and mechanical properties of selective laser melted Ti-6Al-4V alloy10.1016/j.matdes.2016.08.036 ↗
25. Effect of metallurgical defect and phase transition on geometric accuracy and wear resistance of iron-based parts fabricated by selective laser melting10.1557/jmr.2016.132 ↗
26. The development of TiNi-based negative Poisson's ratio structure using selective laser melting10.1016/j.actamat.2015.12.017 ↗
27. Compressive properties of Ti-6Al-4V auxetic mesh structures made by electron beam melting10.1016/j.actamat.2012.03.015 ↗
28. Comparative study of auxetic geometries by means of computer-aided design and engineering10.1088/0964-1726/21/10/105004 ↗
29. A numerical study of auxetic composite panels under blast loadings10.1016/j.compstruct.2015.09.038 ↗
30. Novel structure with negative Poisson's ratio and enhanced Young's modulus10.1016/j.compstruct.2015.11.036 ↗
31. Effective in-plane elastic properties of auxetic honeycombs with spatial irregularity10.1016/j.mechmat.2016.01.009 ↗
32. Corrigendum to “influence of processing conditions on strut structure and compressive properties of cellular lattice structures fabricated by selective laser melting”10.1016/j.msea.2015.01.031 ↗
33. Additive manufactured AlSi10Mg samples using selective laser melting (SLM): microstructure, high cycle fatigue, and fracture behavior10.1016/j.matdes.2011.07.067 ↗
34. High power selective laser melting (HP SLM) of aluminum parts10.1016/j.phpro.2011.03.035 ↗
35. Mechanical properties of AlSi10Mg produced by selective laser melting10.1016/j.phpro.2012.10.059 ↗
36. Selective laser melting 3D printing of Ni-based superalloy: understanding thermodynamic mechanisms10.1007/s11434-016-1098-7 ↗
37. Thermal evolution behavior and fluid dynamics during laser additive manufacturing of Al-based nanocomposites: underlying role of reinforcement weight fraction10.1063/1.4937905 ↗
38. Optimal topology for additive manufacture: a method for enabling additive manufacture of support-free optimal structures10.1016/j.matdes.2014.06.015 ↗
39. Honeycomb cores with enhanced buckling strength10.1016/j.compstruct.2010.09.021 ↗
40. Investigation on reducing distortion by preheating during manufacture of aluminum components using selective laser melting10.2351/1.4828755 ↗
41. Mechanical properties of 3D re-entrant honeycomb auxetic structures realized via additive manufacturing