journal article·2016-01

Characterization of heat affected zone liquation cracking in laser additive manufacturing of Inconel 718

Yuan Chen, Ke Zhang, Jian Huang, Seyed Reza Elmi Hosseini, Zhuguo Li

Materials & Design· Volume 90
Publisher page

Abstract

Abstract The heat affected zone liquation cracking behavior was studied in laser additive manufactured Inconel 718. Liquation cracking was found initiating from the weak site near the fusion line in the pre-deposited layer, propagating along the interdendritic region with the further deposition proceeding layer by layer. Total cracking length calculation results showed that when controlling the heat input and height increment constant, liquation cracking susceptibility increased with the increase of laser scanning speed; and when controlling the laser scanning speed and height increment constant, liquation cracking susceptibility increased with the increase of heat input. The effect of grain boundary misorientation on susceptibility to liquation cracking was also investigated through electron backscatter diffraction (EBSD) measurement, and the results showed that liquation cracking tendency increased with the increase of grain boundary angle, which was considered to be attributed to the higher stability of liquation film at larger grain boundary during the last stage of solidification.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · Laser-induced spectroscopy and plasma

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Effect of heat input on heat affected zone cracking in laser welded ATI Allvac 718Plus superalloy10.1016/j.msea.2006.11.054 ↗
2. Microstructural analysis of laser-beam-welded directionally solidified INCONEL 73810.1007/s11661-006-9063-8 ↗
3. Contribution of constitutional liquation of gamma prime precipitate to weld HAZ cracking of cast Inconel 738 superalloy10.1016/j.scriptamat.2003.11.025 ↗
4. Microstructural study of weld fusion zone of TIG welded IN 738LC nickel-based superalloy10.1016/j.scriptamat.2004.06.013 ↗
5. Improvement in laser weldability of INCONEL 738 superalloy through microstructural modification10.1007/s11661-009-9962-6 ↗
6. Effect of boron concentration and grain size on weld heat affected zone microfissuring in Inconel 718 base superalloys10.1179/136217199101537761 ↗
7. INCONEL 718: a solidification diagram10.1007/BF02650300 ↗
8. Solidification of the nickel-base superalloy 718: a phase diagram approach10.1007/BF02670181 ↗
9. Control of Laves phase in Inconel 718 GTA welds with current pulsing10.1179/136217104225021788 ↗
10. Improvement of mechanical properties of Inconel 718 electron beam welds—influence of welding techniques and postweld heat treatment10.1007/s00170-008-1751-7 ↗
11. Texture control during laser deposition of nickel-based superalloy10.1016/j.scriptamat.2012.06.014 ↗
12. The effect of laser scanning path on microstructures and mechanical properties of laser solid formed nickel-base superalloy Inconel 71810.1016/j.jallcom.2010.11.176 ↗
13. Laser cladding of aerospace materials10.1016/S0924-0136(01)01121-9 ↗
14. Epitaxial laser metal forming: analysis of microstructure formation10.1016/S0921-5093(99)00202-6 ↗
15. Single-crystal laser deposition of superalloys: processing–microstructure maps10.1016/S1359-6454(00)00367-0 ↗
16. Residual stresses and microstructure in Powder Bed Direct Laser Deposition (PB DLD) samples
17. Koren · 1982 · 349
18. Analysis of laser beam weldability of Inconel 738 superalloy10.1016/j.matchar.2010.02.016 ↗
19. Liquation and post-weld heat treatment cracking in Rene 80 laser repair welds10.1016/j.jmatprotec.2011.09.001 ↗
20. Boundary liquation and interface cracking characterization in laser deposition of Inconel 738 on directionally solidified Ni-based superalloy10.1016/j.scriptamat.2005.03.047 ↗
21. A comparison of the solidification behavior of INCOLOY 909 and INCONEL 71810.1007/BF02782428 ↗
22. Effect of ultrarapid cooling on microstructure of laser cladding IN718 coating10.1179/1743294413Y.0000000142 ↗
23. Solidification of Nb-bearing superalloys: part II. Pseudoternary solidification surfaces10.1007/s11661-998-0320-x ↗
24. Rappaz · 2001
25. Laser-assisted machining of Inconel 718 with an economic analysis10.1016/j.ijmachtools.2005.11.005 ↗
26. Solidification cracking of superalloy single- and bi-crystals10.1016/j.actamat.2004.03.047 ↗
27. Last-stage solidification of alloys: theoretical model of dendrite-arm and grain coalescence10.1007/s11661-003-0083-3 ↗
28. Dislocation models of crystal grain boundaries10.1103/PhysRev.78.275 ↗