Influence of powder characteristics on the microstructure and mechanical properties of HIPped CM247LC Ni superalloy
Source abstract
Abstract
This work investigates the influence of gas atomised powder particle size and characteristics on the microstructure and mechanical properties of hot isostatically pressed (HIPped) CM247LC nickel-base superalloy powders. Three different GA powders (particle size ranges: 53–150 μm; 0–150 μm; 15–53 μm) of very similar compositions were HIPped at the γ' solvus temperature. Microstructural analysis and tensile testing were conducted on as-HIPped samples. It was found that the fine powders promote the formation of prior particle boundaries (PPBs) decorated with carbide and oxy-carbide clusters due to the higher oxygen content per weight in fine powders, which adversely affects the mechanical properties. It was also found that coarse powder particles are beneficial for minimising PPBs and increasing the twin boundaries fraction. Nonetheless, the best balance of high temperature tensile properties was in the wide range powder (0–150 μm). The effect of particle size was further investigated by sieving the wide range powder into two particle size distributions. Tensile testing of these conditions showed that the hot ductility could be further improved by removing the very fine powder particles. Both of the sieved powders exhibited better hot ductility than the wide range powder and also outperformed the 53–150 μm and 15–53 μm powders.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · High-Temperature Coating Behaviors · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Production of net-shape static parts by direct HIPing of nickel base superalloy prealloyed powders10.4028/www.scientific.net/AMR.278.277 ↗
2. High performance and high complexity net shape parts for gas turbines: the ISOPREC® powder metallurgy process10.1016/S0261-3069(99)00093-X ↗
3. Net-shape hot isostatic pressing of a nickel-based powder superalloy
4. 18 - fabrication of near-net-shape cost-effective titanium components by use of prealloyed powders and hot isostatic pressing
5. Effect of oxygen content and heat treatment on carbide precipitation behavior in PM Ni-base superalloys10.1007/s12613-012-0635-x ↗
6. Effect of oxygen content of powder on microstructure and mechanical properties of hot isostatically pressed superalloy Inconel 71810.1016/j.msea.2006.07.053 ↗
7. The effect of ceramic inclusions on the low cycle fatigue life of low carbon astroloy subjected to hot isostatic pressing10.1016/0025-5416(81)90004-5 ↗
8. Influence of hot isostatic pressing temperature on microstructure and tensile properties of a nickel-based superalloy powder10.1016/j.msea.2012.11.084 ↗
9. Nickel-based superalloys for advanced turbine engines: chemistry, microstructure, and properties10.2514/1.18239 ↗
10. Influence of modified processing on structure and properties of hot isostatically pressed superalloy Inconel 71810.1016/j.msea.2005.11.031 ↗
11. The Microstructures and Properties of Powder HIPped Nickel-Based Superalloy CM247LC
12. Thermal evolution behavior of carbides and γ' precipitates in FGH96 superalloy powder10.1016/j.matchar.2012.02.014 ↗
13. TCP phase predictions in Ni-based superalloys: structure maps revisited10.1016/j.actamat.2010.10.013 ↗
14. Alloy design of a new type high-performance P/M turbine disk superalloy10.1016/j.proeng.2011.12.541 ↗
15. Effect of minor additions on the formation of TCP phases in modified RR2086 SX superalloys10.1016/j.msea.2003.09.051 ↗
16. Influence of heat treatment on microstructure and tensile properties of conventionally cast and directionally solidified superalloy CM247LC10.1016/j.matlet.2007.07.058 ↗
17. Characteristics and mechanical properties of polycrystalline CM 247 LC superalloy casting10.2320/matertrans.45.562 ↗
18. Effect of solution-treatment on microstructure and mechanical properties of cast fine-grain CM 247 LC superalloy10.2320/matertrans.45.1360 ↗
19. MAR-M247 derivations—CM247 LC DS alloy, CMSX single crystal alloys, properties and performance
20. Hot tearing of nickel-based superalloys during directional solidification10.1016/S1359-6454(02)00042-3 ↗
21. Selective Laser Melting of Nickel Superalloys for High Temperature Applications
22. Kendall · 1989
23. Heat treatment of UDIMET 720Li: the effect of microstructure on properties10.1016/S0921-5093(98)00867-3 ↗
24. Microstructure and mechanical properties of an advanced nickel-based superalloy in the as-HIP form10.4028/www.scientific.net/AMR.278.265 ↗
25. On the formation of serrated grain boundaries and fan type structures in an advanced polycrystalline nickel-base superalloy10.1016/j.jmatprotec.2008.03.008 ↗
26. On the mechanism of serrated grain boundary formation in Ni-based superalloys10.1016/0001-6160(83)90202-X ↗
27. Loyer, H.D., M. Macia, T Sanders T. H., Khan, T, Mechanisms of formation of serrated grain boundaries in nickel base superalloys. Superalloys, 1996: p. 119–127.
28. Qiu, C.L. and P. Andrews, On the formation of irregular-shaped gamma prime and serrated grain boundaries in a nickel-based superalloy during continuous cooling. Mater. Charact., 2013. 76(0): p. 28–34.10.1016/j.matchar.2012.11.012 ↗
29. Effect of serrated grain boundaries on the creep property of Inconel 718 superalloy10.1016/j.msea.2011.10.014 ↗
30. Grain boundary engineering of powder processed Ni-base superalloy RR1000: influence of the deformation parameters10.1016/j.msea.2014.12.112 ↗
31. Grain boundary control for improved intergranular stress corrosion cracking resistance in austenitic stainless steels: new approach10.1179/174892406X142723 ↗
32. Effect of HIP temperature and post-HIP heat treatments on coincidence site lattices and twin boundaries in IN718
33. Evolution of grain boundary network topology in 316L austenitic stainless steel during powder hot isostatic pressing10.1016/j.actamat.2017.04.068 ↗
34. The influence of grain boundary elements on properties and microstructures of P/M nickel base superalloys10.7449/2004/Superalloys_2004_73_81 ↗