journal article·2025-02Open access

Tailoring the strength of inconel 718: Insights into LPBF parameters and heat treatment synergy

Galina Kasperovich, Joachim Gussone, Guillermo Requena, Norbert Schell, Andreas Stark, Jan Haubrich

Materials & Design· Volume 250

Abstract

• Achieving target properties of LPBF Inconel 718 while optimizing process parameters and minimizing residual porosity. • Tuning strength and ductility through thermomechanical treatments to minimize harmful phases and refine microstructures. • Analysis of texture and its changes after heat treatment and correlation to mechanical behavior. • Assessment of recrystallisation and grain growth linked to texture and strength. The enhancement of mechanical performance in Inconel 718 fabricated via Laser Powder Bed Fusion by optimizing process parameters and various post-processing heat treatments, such as double aging and high-temperature isostatic pressing, are explored. Phase and texture evolution were characterized by high-energy diffraction electron backscatter diffraction analysis, showing a weak Goss-type texture in the as-built condition. Carrying out a homogenization annealing above δ solvus, e.g. at 1155 °C, suppresses its transformation into δ phase and enables an aging treatment to achieve a controlled precipitation of γ’/γ’’ instead. MC-type carbides were detected in different morphologies at grain boundaries and in the matrix. Linking the microstructural changes with trends in the tensile properties along three build orientations, i.e. horizontal, diagonal and vertical to the build platform, we show that texture and anisotropy in the as-built condition can largely be eliminated by an annealing at 1155 °C. The mechanical properties can be adjusted further by adding double-aging or varying the cooling rate after the solvus treatment. The findings reveal a clear correlation between optimized LPBF parameters, heat treatment strategies, microstructural evolution, phase distribution, and the resultant mechanical properties, which contributes to the development of tailored process chains for specific application requirements.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Manufacturing Process and Optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (69)

Show source-provided references
1. Making sense of 3-D printing: Creating a map of additive manufacturing products and services10.1016/j.addma.2014.08.005 ↗
2. Geometric feature reproducibility for laser powder bed fusion (L-PBF) additive manufacturing with Inconel 718
3. Review of selective laser melting: materials and applications10.1063/1.4935926 ↗
4. Additive manufacturing for the aircraft industry: a review
5. A. Uriondo, M. Esperon-Miguez, S. Perinpanayagam, The present and future of additive manufacturing in the aerospace sector: a review of important aspects. J Aerospace Eng (2015) 229(11), 2132– 2147, Doi: 10.1177/0954410014568797.10.1177/0954410014568797 ↗
6. F. Caiazzo, V. Alfieri, G. Corrado, P. Argenio, Laser powder-bed fusion of Inconel 718 to manufacture turbine blades, Int. J. Adv. Manuf. Technol. (2017) 93, 4023–4031 Doi: 10.1007/s00170-017-0839-3.10.1007/s00170-017-0839-3 ↗
7. The effect of build direction and geometric optimization in laser powder bed fusion of Inconel 718 structures with internal channels
8. Roughness related to cooling performance of channels made through additive manufacturing10.1115/1.4064310 ↗
9. Improvement of fatigue resistance and ductility of selective laser molten TiAl6V410.1016/j.jmatprotec.2015.01.025 ↗
10. S. Gialanella, A. Malandruccolo, Aerospace Alloys, Topics in Mining, Metallurgy and Materials Engineering (2020) Springer Nature Switzerland AG, Doi: 10.1007/978-3-030-24440-8.10.1007/978-3-030-24440-8 ↗
11. R.C. Reed, The superalloys: fundamentals and applications, Cambridge University Press, 31.07.2008, 1-392, Doi: 10.1017/CBO9780511541285.10.1017/CBO9780511541285 ↗
12. Review on powder-bed laser additive manufacturing of Inconel 718 parts
13. Microstructural and mechanical approaches of the selective laser melting process applied to a nickel-base superalloy10.1016/j.msea.2011.11.092 ↗
14. Correlation between porosity and processing parameters in TiAl6V4 produced by selective laser melting
15. Microstructural porosity in additive manufacturing: The formation and detection of pores in metal parts fabricated by powder bed fusion
16. Optimizing quality of additively manufactured Inconel 718 using powder bed laser melting process
17. Induced porosity in superalloy 718 through the laser additive manufacturing process: microstructure and mechanical properties10.1016/j.jallcom.2017.07.198 ↗
18. D. Wang, H. Han, B. Sa, K. Li, J. Yan, J. Zhang, J. Liu, Z. He, N. Wang, M Yan, A review and a statistical analysis of porosity in metals additively manufactured by laser powder bed fusion, Opto-Electron Adv. (2022) 5, No 10, Review, Doi: 10.29026/oea.2022.21005.10.29026/oea.2022.210058 ↗
19. The effect of layer thickness at selective laser melting10.1016/j.proeng.2017.01.179 ↗
20. On the relevance of volumetric energy density in the investigation of inconel 718 laser powder bed fusion10.3390/ma13030538 ↗
21. An investigation of process parameter modifications on additively manufactured inconel 718 parts10.1007/s11665-018-3612-3 ↗
22. Some features of anisothermal solid-state transformations in alloy 71810.1016/j.matchar.2010.02.011 ↗
23. Tailoring of the microstructure of laser powder bed fused inconel 718 using solution annealing and aging treatments10.3390/met11060921 ↗
24. M. Calandri, S.Yin, B.Aldwell, F.Calignano, R. Lupoi, D. Ugues, Texture and microstructural features at different length scales in inconel 718 produced by selective laser melting, Materials (Basel) (2019) Apr.12(8),1293, Doi: 10.3390/ma12081293.10.3390/ma12081293 ↗
25. Laves phase control of inconel 718 superalloy fabricated by laser direct energy deposition via δ aging and solution treatment10.1016/j.jmrt.2020.06.061 ↗
26. The influence of Laves phases on the room temperature tensile properties of Inconel 718 fabricated by powder feeding laser additive manufacturing10.1016/j.actamat.2018.10.032 ↗
27. Laves phase control of Inconel 718 alloy using quasi-continuous-wave laser additive manufacturing10.1016/j.matdes.2017.03.004 ↗
28. Anisotropic tensile behavior of in situ precipitation strengthened Inconel 718 fabricated by additive manufacturing10.1016/j.msea.2017.06.098 ↗
29. A lightweight structure redesign method based on selective laser melting10.3390/met6110280 ↗
30. Effect of manufacturing parameters on the microstructure and mechanical properties of metal laser sintering parts of precipitate hardenable metals10.1007/s00170-018-2586-5 ↗
31. The microstructure and mechanical properties of deposited-IN718 by selective laser melting10.1016/j.jallcom.2011.10.107 ↗
32. The effect of interdendritic δ phase on the mechanical properties of Alloy 718 built up by additive manufacturing
33. The effect of γ″ and δ phase precipitation on the mechanical properties of inconel 718 manufactured by selective laser melting: an In Situ neutron diffraction and acoustic emission study10.1007/s11837-020-04463-3 ↗
34. Impact of heat treatment on mechanical behaviour of Inconel 718 processed with tailored microstructure by selective laser melting
35. M.E. Aydinöz, F. Brenne, M. Schaper, C. Schaak, W. Tillmann, J. Nellesen, T. Niendorf, On the microstructural and mechanical properties of post-treated additively manufactured Inconel 718 superalloy under quasi-static and cyclic loading, Mat. Sci. Eng. (2016) A 669, 246–258, Doi: 10.1016/j.msea.2016.05.089.10.1016/j.msea.2016.05.089 ↗
36. Effect of post-processing on microstructure and mechanical properties of Alloy 718 fabricated using powder bed fusion additive manufacturing processes10.1108/RPJ-12-2019-0310 ↗
37. D. Zhang, W. Niu, X. Cao, Z. Liu, Effect of standard heat treatment on the microstructure and mechanical properties of selective laser melting manufactured Inconel 718 superalloy, Mat. Sci. Eng. (2015) A 644 32–40, Doi: 10.1016/j.msea.2015.06.021.10.1016/j.msea.2015.06.021 ↗
38. Phase transformations during continuous cooling in inconel 718 alloys manufactured by laser powder bed fusion and suction casting10.1016/j.matchar.2022.111764 ↗
39. Microstructure and mechanical properties of Inconel 718 produced by selective laser melting: sample orientation dependence and effects of post heat treatments10.1016/j.msea.2017.12.043 ↗
40. Effect of different heat treatments on the microstructure and mechanical properties in selective laser melted INCONEL 718 alloy
41. Improved plasticity of Inconel 718 superalloy fabricated by selective laser melting through a novel heat treatment process
42. Mechanical and microstructural investigation of nickel-based superalloy IN718 manufactured by selective laser melting (SLM)10.1002/adem.201500158 ↗
43. E. Chlebus, K. Gruber, B. Kuźnicka, J. Kurzac, T. Kurzynowski, Effect of heat treatment on the microstructure and mechanical properties of Inconel 718 processed by selective laser melting, Mat. Sci. Eng. (2015) A 639, 647–655, Doi: 10.1016/j.msea.2015.05.035.10.1016/j.msea.2015.05.035 ↗
44. X. Yao, S.K. Moon, B. Y. Lee, G.Bi, Effects of Heat Treatment on Microstructures and Tensile Properties of IN718/TiC Nanocomposite Fabricated by Selective Laser Melting, Int J. Precision Eng. Manuf. (2017), 18, 12, 1693-1701, Doi: 10.1007/s12541-017-0197-y.10.1007/s12541-017-0197-y ↗
45. Characteristics of inconel powders for powder-bed additive manufacturing10.1016/J.ENG.2017.05.012 ↗
46. Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting10.1016/j.actamat.2011.12.032 ↗
47. Microstructure and mechanical properties of selective laser melted Inconel 718 compared to forging and casting10.1016/j.matlet.2015.10.136 ↗
48. E.W. Hovig, A.S. Azar, F. Grytten, K. Sørby, E. Andreassen, Determination of anisotropic mechanical properties for materials processed by laser powder bed fusion, Adv. Mater. Sci. Eng. (2018) Article ID 7650303, 1-20, Doi: 10.1155/2018/7650303.10.1155/2018/7650303 ↗
49. S. Azadian, L.Y. Wei, R. Warren, Delta phase precipitation in Inconel 718, Mater. Charact., (2004), 53, 1, 7-16, Doi: 10.1016/j.matchar.2004.07.004.10.1016/j.matchar.2004.07.004 ↗
50. X. Xie, C. Xu, G. Wang, J. Dong, W. Cao, R. Kennedy, TTT diagram of a newly developed nickel-base superalloy-Allvac® 718PlusTM, Superalloys 718, 625 and Derivatives (2005) 193–202. Doi: 10.7449/2005/superalloys_2005_193_202.10.7449/2005/Superalloys_2005_193_202 ↗
51. Anomalous notch rupture behavior of nickel-based superalloy inconel 718 due to fabrication by additive manufacturing
52. Microstructure and hardness studies of Inconel 718 manufactured by selective laser melting before and after solution heat treatment10.1016/j.msea.2017.02.062 ↗
53. Structure, texture and phases in 3D printed IN718 alloy subjected to homogenization and HIP treatments10.3390/met7060196 ↗
54. M.N. Doğu, K. Davut, M.A. Obeidi, M.A. Yalcın, H. Gu, T.S. E. Low, J. Ginn, D. Brabazon, Recrystallization and grain growth kinetics of IN718 manufactured by laser powder bed fusion (2022) J. Mat. Res. Technol., 19, 4242-4257, Doi: 10.1016/j.jmrt.2022.06.157.10.1016/j.jmrt.2022.06.157 ↗
55. Unique crystallographic texture formation in Inconel 718 by laser powder bed fusion and its effect on mechanical anisotropy10.1016/j.actamat.2021.116876 ↗
56. S. Ghorbanpour, K. Deshmukh, S. Sahu, T. Riemslag, E. Reinton, E. Borisov, A. Popovich, V. Bertolo, Q. Jiang, M.T.Sanchez, M. Knezevic, V. Popovich, Additive manufacturing of functionally graded inconel 718: Effect of heat treatment and building orientation on microstructure and fatigue behavior (2022) J. of Mat. Processing Tech. 306 117573, Doi: 10.1016/j.jmatprotec.2022.117573.10.1016/j.jmatprotec.2022.117573 ↗
57. S.A.E. Aerospace, Aerospace Material Specification: AMS 5662, SAE International, 2009, AMS5662: Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings 52.5Ni 19Cr 3.0Mo 5.1Cb 0.90Ti 0.50Al 18Fe, Consumable Electrode or Vacuum Induction Melted 1775°F (968°C) Solution Heat Treated, Precipitation Hardenable - SAE International.
58. ZEN SP1 (Black Edition)©, Carl Zeiss Microscopy GmbH, 2012 (1997-2013).
59. AnalySIS©, Soft Imaging System GmbH, Muenster, Germany, 2002.
60. Calculation of effective Young's modulus distribution from electron backscatter diffraction results for stochastic analyses in aerospace applications
61. Elastic constants of a monocrystalline nickel-base superalloy10.1007/BF02814240 ↗
62. A.P. Hammersley, FIT2D: a multi-purpose data reduction, analysis and visualization program, Doi: 10.1107/S1600576716000455.10.1107/S1600576716000455 ↗
63. Critical instability at moving keyhole tip generates porosity in laser melting10.1126/science.abd1587 ↗
64. Powder Bed Fusion of nickel-based superalloys: a review10.1016/j.ijmachtools.2021.103729 ↗
65. Effects of the γ́́-Ni3Nb phase on mechanical properties of inconel 718 superalloys with different heat treatments10.3390/ma13010151 ↗
66. Unexpected δ-phase formation in additive-manufactured Ni-based superalloy10.1007/s11837-015-1772-2 ↗
67. The effect of post-processes on the microstructure and creep properties of alloy718 built up by selective laser melting10.3390/ma11060996 ↗
68. Z. Zhou, A.S. Gill, D. Qian, S. Mannava, K. Langer, Y. Wen, V.K. Vasudevan, A finite element study of thermal relaxation of residual stress in laser shock peened in718 superalloy (2011) Int. J. Impact Eng. 38 (2011) 590–596, Doi: 10.1016/j.ijimpeng.2011.02.006.10.1016/j.ijimpeng.2011.02.006 ↗
69. Effect of solution treatment on microstructure and stress rupture properties of precipitation hardened IN718 superalloy fabricated by laser powder-bed fusion process10.1016/j.jmrt.2022.10.047 ↗