Spatter formation in selective laser melting process using multi-laser technology
Source abstract
Abstract
Abstract This study demonstrates the significant role of recoil pressure in selective laser melting (SLM) process using multi-laser technology. High-speed photography is utilized to observe the formation mechanism, and also the behavior of spatter particles during SLM fabrication. A computational image analysis framework is developed to assess the size and the number of induced spatters. The morphology and the composition of spatters and their influence on the surface of the fabricated parts are determined. Unmelted regions, resulting from spatter deposition into the powder or the solidified layer, are found to be a detrimental type of defects on mechanical properties of SLM parts. This is followed by a discussion on demand for developing a meaningful process parameters optimization to enhance the mechanical properties of SLM products.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Gibson · 2010
2. Selective laser melting of high aspect ratio 3D nickel–titanium structures two way trained for MEMS applications10.1007/s10999-007-9032-4 ↗
3. 3-D printing: the new industrial revolution10.1016/j.bushor.2011.11.003 ↗
4. Fabrication of NiTi through additive manufacturing: a review10.1016/j.pmatsci.2016.08.001 ↗
5. Metal additive manufacturing: a review10.1007/s11665-014-0958-z ↗
6. Influence of the structural orientation on the mechanical properties of selective laser melted Ti6Al4V open-porous scaffolds10.1016/j.matdes.2016.01.095 ↗
7. Selective laser melting (SLM) of AlSi12Mg lattice structures10.1016/j.matdes.2016.02.127 ↗
8. Process development and characterization of additively manufactured nickel–titanium shape memory parts10.1177/1045389X16635848 ↗
9. Taheri Andani · 2015
10. Anon · 2014 · 1e9
11. Characteristics of spatter formation under the effects of different laser parameters during laser drilling10.1016/S0924-0136(01)00910-4 ↗
12. Spatter prevention during the laser drilling of selected aerospace materials10.1016/S0924-0136(03)00184-5 ↗
13. Laser powder bed fusion of nickel alloy 625: experimental investigations of effects of process parameters on melt pool size and shape with spatter analysis10.1016/j.ijmachtools.2017.03.004 ↗
14. Laser powder-bed fusion additive manufacturing: physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones10.1016/j.actamat.2016.02.014 ↗
15. A study on the laser spatter and the oxidation reactions during selective laser melting of 316L stainless steel, Al-Si10-Mg, and Ti-6Al-4V10.1007/s11661-015-2882-8 ↗
16. Selective laser melting of thin wall parts using pulse shaping10.1016/j.jmatprotec.2009.09.011 ↗
17. Investigation into spatter behavior during selective laser melting of AISI 316L stainless steel powder10.1016/j.matdes.2015.08.086 ↗
18. An Investigation of Effective Process Parameters on Phase Transformation Temperature of Nitinol Manufactured by Selective Laser Melting10.1115/SMASIS2014-7649 ↗
19. Standard Test Methods for Tension Testing of Metallic Materials
20. Metallic vapor ejection effect on melt pool dynamics in deep penetration laser welding10.2351/1.1642633 ↗
21. Experimental study of the dynamical coupling between the induced vapour plume and the melt pool for Nd–Yag CW laser welding10.1088/0022-3727/39/2/023 ↗
22. Influence of the shielding gas flow on the removal of process by-products in the selective laser melting process10.1016/j.addma.2016.01.004 ↗
23. A threshold selection method from gray-level histograms
24. Effects of building orientation and heat treatment on fatigue behavior of selective laser melted 17-4 PH stainless steel