journal article·2024-02Open access

Surface modification of ultra-high molecular weight polyethylene fibers by an eco-friendly impregnation solution to enhance interfacial adhesion with rubber

Ruiyin Liu, Zepei Yan, Chengyu Ruan, Huan Yan, Minghan Xu, Shugao Zhao, Hongying Zhao, He Wang

Materials & Design· Volume 238

Abstract

A novel environmentally friendly resorcinol–formaldehyde-free impregnation solution was successfully developed to enhance the interfacial adhesion of ultra-high molecular weight polyethylene (UHMWPE) fiber cords with rubber. The UHMWPE fiber cords were first treated by dopamine (DA) and N-(β-aminoethyl)-γ-aminopropylmethyldimethoxysilane (KH602), followed by impregnation in a mixture of glycerol triglycidyl ether (GTE), diethylenetriamine (DETA) and vinyl pyridine latex. Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) were used to characterize the chemical composition of the fiber cords surface. The results showed that the impregnation process successfully modified the surface of the UHMWPE fiber cords and did not deteriorate the fiber strength. The H pull-out results showed that the adhesion strength between the modified UHMWPE fiber cords and the rubber increased by 257 % compared to the untreated cords. In addition, scanning electron microscopy-energy dispersive spectrometry (SEM-EDS) was employed to characterize the interface morphology of the fiber cords/rubber composites. The formation of a transition layer and the migration of the curatives contributed to the improvement in the interfacial adhesive properties.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Fiber-reinforced polymer composites · Polymer crystallization and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Aramid nanofiber reinforced rubber compounds for the application of tire tread with high abrasion resistance and fuel saving efficiency
2. A new eco-friendly dipping system for PA66 fiber cords/rubber composites with strong interfacial adhesion and good fatigue stability
3. Study on theoretical model of burst pressure of fiber reinforced arc-shaped rubber hose with good balance performance10.1177/0967391120949488 ↗
4. Prediction of ply angles of air springs according to airbag positions and their effects on lateral and torsional stiffness10.3390/app122211815 ↗
5. Mechanical properties of surface-modified ultra-high molecular weight polyethylene fiber reinforced natural rubber composites10.1002/pc.23685 ↗
6. Biomimetic surface modification of UHMWPE fibers to enhance interfacial adhesion with rubber matrix via constructing polydopamine functionalization platform and then depositing zinc oxide nanoparticles
7. An effective surface modification of UHMWPE fiber for improving the interfacial adhesion of epoxy resin composites10.1002/pc.25483 ↗
8. Functional interface with polyaniline in UHMWPE fiber-reinforced composites for enhanced interfacial adhesion and damage monitoring10.1002/pc.26375 ↗
9. Ultra-high molecular weight polyethylene fibers/epoxy composites: effect of fiber treatment on properties10.1007/s12221-019-8704-7 ↗
10. Effect of surface treatment with potassium permanganate on ultra-high molecular weight polyethylene fiber reinforced natural rubber composites10.1016/j.polymertesting.2016.08.006 ↗
11. Thickness effects of surface direct fluorination and plasma modification on ultra-high molecular weight polyethylene ultrathin membranes10.1002/mame.202200557 ↗
12. Preparation of ultra-high molecular weight polyethylene (UHMWPE) fiber copper (II) ions adsorbent by radiation grafting10.1007/s10967-022-08597-3 ↗
13. Antimicrobial and photophysical properties of chemically grafted ultra-high-molecular-weight polyethylene10.1016/j.msec.2018.11.066 ↗
14. Enhancement on interlaminar shear strength and tribological properties in water of ultra high molecular weight polyethylene/glass fabric/phenolic laminate composite by surface modification of fillers10.1016/j.matdes.2013.10.053 ↗
15. Modification of ultra-high-molecular weight polyethylene by various fluorinating routes10.1002/pola.24793 ↗
16. Adhesion of RFL-coated aramid fibres to elastomers: The role of elastomer-latex compatibility10.1080/01694243.2013.764145 ↗
17. Mechanistic investigations into the Adhesion between RFL-treated cords and rubber. Part I: The influence of rubber curatives10.5254/1.3548180 ↗
18. Formaldehyde in the indoor environment10.1021/cr800399g ↗
19. Polyester (PET) fabrics coated with environmentally friendly adhesive and its interface structure and adhesive properties with rubber10.1016/j.compscitech.2020.108171 ↗
20. Nylon 66 fibers coated with environmentally friendly dopamine-modified adhesives and their interfacial adhesion with neoprene rubber10.1002/pc.27821 ↗
21. Surface modification of aramid fibers by bio-inspired poly (dopamine) and epoxy functionalized silane grafting10.1021/am507087p ↗
22. Ultrahigh molecular weight polyethylene: Catalysis, structure, properties, processing and applications10.1016/j.progpolymsci.2020.101290 ↗
23. Reinforced UHMWPE composites by grafting TiO2 on ATP nanofibers for improving thermal and tribological properties10.1016/j.triboint.2022.107585 ↗
24. Remarkably improved interfacial adhesion of UHMWPE fibers reinforced composite by constructing a three-dimensional stacked nanoparticles structure at interphase10.1016/j.jiec.2022.03.031 ↗
25. Catechol and epoxy functionalized ultrahigh molecular weight polyethylene (UHMWPE) fibers with improved surface activity and interfacial adhesion10.1016/j.compscitech.2015.03.017 ↗
26. Single-molecule mechanics of mussel adhesion10.1073/pnas.0605552103 ↗
27. Polydopamine and its derivative materials: synthesis and promising applications in energy, environmental, and biomedical fields10.1021/cr400407a ↗
28. Jelena. Zec, Nataša. Z. Tomić, Milorad. Zrilić, Steva. Lević, Aleksandar. Marinković, Radmila. Jančić. Heinemann, Optimization of Al2O3 particle modification and UHMWPE fiber oxidation of EVA based hybrid composites: Compatibility, morphological and mechanical properties, Compos. Part. B-Eng. 153 (2018) 36-48.10.1016/j.compositesb.2018.07.031 ↗
29. Codepositing mussel-inspired nanohybrids onto one-dimensional fibers under “green” conditions for significantly enhanced surface/interfacial properties10.1021/acssuschemeng.8b00290 ↗
30. Surface modification of hybrid-fabric composites with amino silane and polydopamine for enhanced mechanical and tribological behaviors10.1016/j.triboint.2016.11.013 ↗
31. Surface amine-functionalization of UHMWPE fiber by bio-inspired polydopamine and grafted hexamethylene diamine10.1002/sia.6203 ↗
32. Surface modification of UHMWPE fibers by ozone treatment and UV grafting for adhesion improvement10.1080/00218464.2016.1229603 ↗
33. Resorcinol formaldehyde latex (RFL) adhesives and applications
34. Enhanced interfacial and mechanical properties of high-modulus carbon fiber composites: Establishing modulus intermediate layer between fiber and matrix based on tailored-modulus epoxy10.1016/j.compscitech.2018.05.009 ↗
35. Mussel-inspired environmentally friendly dipping system for aramid fiber and its interfacial adhesive mechanism with rubber10.1016/j.polymer.2021.124414 ↗