Fabrication and strengthening mechanism of dual-phased and bimodal-sized (Si3N4p + TiB2p)/6061Al hybrid composite
Source abstract
Abstract
The dual-phased and bimodal-sized (Si3N4p + TiB2p)/6061Al hybrid composites were successfully fabricated. The effects of particle size on microstructure and strengthening mechanisms were clarified. It was found that both Si3N4p and TiB2p stimulated the nucleation of recrystallization and distorted the fibrous distribution of elongated grains. A strong grain refinement effect was realized by introducing fine Si3N4p and fine TiB2p, while the grain aspect ratio was the lowest in the composite reinforced by coarse particles. The texture intensity was weakened by the addition of particles, while the texture types were not changed. Si3N4p and TiB2p were tightly bonded with Al matrix, and MgAl2O4 was formed at the Si3N4p/6061Al and TiB2p/6061Al interfaces, causing a large consumption of Mg element. Hence, the number of precipitates in matrix was reduced, and the precipitation strengthening was weakened. The composite reinforced by fine Si3N4p and coarse TiB2p owned a highest room-temperature strength due to the strengthening of load transfer, thermal mismatch, and precipitates. The combination of fine Si3N4p and fine TiB2p achieved a highest high-temperature strength, and load transfer and pinning effect of particles on grain boundaries became the main strengthening mechanisms.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Dispersion and Damage of Carbon Nanotubes in Carbon Nanotube/7055Al Composites During High-Energy Ball Milling Process10.1007/s40195-020-01138-5 ↗
2. Synthesis of nano- to micrometer-sized B4C particle-reinforced aluminum matrix composites via powder metallurgy and subsequent heat treatment10.1007/s11771-021-4770-2 ↗
3. Improving mechanical anisotropy and corrosion resistance of extruded AA7075 alloy by warm cross rolling and annealing10.1016/j.jallcom.2021.158725 ↗
4. Effect of hot extrusion on microstructure and tribological behavior of Al2O3p reinforced 7075 aluminum-matrix composites10.1007/s11771-021-4768-9 ↗
5. Strengthening mechanism and anisotropy of mechanical properties of Si3N4p/Al-Mg-Si composites fabricated by sintering and extrusion10.1016/j.matdes.2021.110111 ↗
6. Effects of reinforcement content and sequential milling on the microstructural and mechanical properties of TiB2 particulate-reinforced eutectic Al-12.6 wt% Si composites10.1007/s10853-017-1687-0 ↗
7. J.H. Shin, H.J. Choi, D.H. Bae, The structure and properties of 2024 aluminum composites reinforced with TiO2 nanoparticles, Mater. Sci. Eng. A 607 (2014) 605–610.10.1016/j.msea.2014.04.038 ↗
8. Synthesis, mechanical properties and wear behavior of hybrid Al/(TiO2 + CuO) nanocomposites10.1016/j.jallcom.2018.07.363 ↗
9. A novel core-shell TiCx particle by modifying TiCx with B element and the preparation of the (TiCx + AlN)/Al composite10.1016/j.jallcom.2021.162448 ↗
10. Design of an in-situ multi-scale particles reinforced (Al2O3+ZrB2+AlN)/Al composite with high strength, elasticity modulus and thermal stability10.1016/j.msea.2020.138983 ↗
11. Study on mechanical and ballistic performances of boron carbide reinforced Al 6061 aluminum alloy produced by powder metallurgy10.1016/j.compositesb.2018.04.043 ↗
12. High-temperature mechanical properties of aluminium alloys reinforced with titanium diboride (TiB2) particles10.1007/s12598-011-0224-6 ↗
13. 6061 Al reinforced with silicon nitride particles processed by mechanical milling10.1016/S1359-6462(02)00133-1 ↗
14. Preparation and wear resistance properties of thermosetting polyimide composites containing solid lubricant fillers10.1016/j.matchemphys.2019.122034 ↗
15. Microstructure and mechanical properties of an in-situ TiB2/Al-Zn-Mg-Cu-Zr composite fabricated by Melt-SHS process10.1016/j.msea.2018.02.025 ↗
16. Effects of Cu and transition metals on the precipitation behaviors of metastable phases at 523 K in Al-Mg-Si alloys10.2320/matertrans.43.2789 ↗
17. The effect of inhomogeneous microstructures on strength and fatigue properties of an Al-Cu-Li thick plate10.1016/j.msea.2018.06.033 ↗
18. Influence of aging treatment on the microstructure, mechanical properties and anisotropy of hot extruded Al-Mg-Si plate10.1016/j.matdes.2019.107999 ↗
19. Effects of Cu content and preaging on precipitation characteristics in aluminum alloy 602210.1007/s11661-000-0272-2 ↗
20. Structure determination of Mg5Si6 particles in Al by dynamic electron diffraction studies10.1126/science.277.5330.1221 ↗
21. Microstructural characterization and compression mechanical response of glass hollow spheres/Al syntactic foams with different Mg additions10.1016/j.msea.2019.138338 ↗
22. Self-lubricating bidirectional carbon fiber reinforced smart aluminum composites by squeeze infiltration process10.1016/j.jmst.2019.04.034 ↗
23. Fabrication of Al-3 wt pct Mg matrix composites reinforced with Al2O3 and SiC particulates by the pressureless infiltration technique10.1007/s11661-998-0216-9 ↗
24. Effect of interfacial reaction on age-hardening ability of B4C/6061Al composites10.1016/j.msea.2014.10.025 ↗
25. Microstructure and strengthening of metal matrix composites10.1016/S0921-5093(98)00561-9 ↗
26. The influence of particle size and particle fracture on the elastic/plastic deformation of metal matrix composites10.1016/1359-6454(96)00008-0 ↗
27. Mechanical behavior and microstructure evolution during deformation of AA7075-T65110.1016/j.msea.2021.141615 ↗
28. Microstructure evolution of spray deposited and as-cast 2195 Al-Li alloys during homogenization10.1016/j.jmst.2020.12.028 ↗
29. Extrusion textures in Al, 6061 alloy and 6061/SiCp nanocomposites10.1016/j.matchar.2013.11.009 ↗
30. On the strength of discontinuous silicon-carbide reinforced aluminum composites10.1016/0036-9748(86)90210-3 ↗
31. Reactive mechanism and mechanical properties of in situ composites fabricated from an Al-TiO2 system by friction stir processing10.1016/j.actamat.2012.09.016 ↗
32. Work-harding of copper-silica.5. Equilibrium plastic relaxation by secondary dislocations10.1080/14786437608222028 ↗
33. High-temperature mechanical properties of 2024 Al matrix nanocomposite reinforced by TiC network architecture10.1016/j.msea.2019.138121 ↗
34. A process model for age hardening of aluminum-alloys.1. The model10.1016/0956-7151(90)90291-N ↗
35. Effect of combined addition of Ag and Cu on the precipitation behavior for an Al-Mg-Si alloy10.1016/j.matchar.2020.110736 ↗
36. Effect of Ag addition on the precipitation evolution and interfacial segregation for Al-Mg-Si alloy10.1016/j.actamat.2019.09.015 ↗
37. Enhanced mechanical properties of 6082 aluminum alloy via SiC addition combined with squeeze casting10.1016/j.jmst.2021.01.077 ↗
38. Aging precipitation and its effects on mechanical properties of TiB2 particulate reinforced 7075Al composite10.1016/j.msea.2022.142742 ↗
39. A novel heat-resistant Al-Si-Cu-Ni-Mg base material synergistically strengthened by Ni-rich intermetallics and nano-AlNp microskeletons10.1016/j.jmst.2018.09.051 ↗
40. Integrated physically based modeling for the multiple static softening mechanisms following multi-stage hot deformation in Al-Zn-Mg-Cu alloys10.1016/j.ijplas.2020.102809 ↗
41. Microscopic stresses in carbon nanotube reinforced aluminum matrix composites determined by in-situ neutron diffraction10.1016/j.jmst.2020.04.016 ↗
42. Mechanical properties of Al/ω-Al-Cu-Fe composites synthesized by the SPS technique10.1016/j.matchar.2018.09.025 ↗
43. An apparatus for performing microtensile tests at elevated temperatures inside a scanning electron microscope10.1016/j.actamat.2013.08.064 ↗
44. Microstructure and mechanical properties of Al-B4C composite at elevated temperature strengthened with in situ Al2O3 network10.1007/s12598-019-01279-2 ↗
45. Nanoparticulate dispersion, microstructure refinement and strengthening mechanisms in Ni-coated SiCp/Al-Cu nanocomposites10.1016/j.msea.2019.138092 ↗