journal article·2026-07Open access

Localized electrodeposition process and mechanical properties of complex structures

Wanfei Ren, Xiaoli Wang, Zhengyi Yang, Huihui Sun, Zhaoqiang Zou, Liang Cao, Lu Yang

Materials & Design· Volume 267

Abstract

In the field of micro/nano manufacturing, high-precision fabrication of miniature pure metallic components with a characteristic size of 5 µm constitutes a critical demand for the development of advanced microelectronic and biomedical devices. In this work, the potential window for copper electrodeposition was determined as − 0.1 to − 1 V by electrochemical characterization. Subsequently, complex cantilevered pure copper microstructures were directly fabricated without masks or supporting structures using localized electrodeposition-based micro-additive manufacturing (LECD-µAM), verifying the universality and applicability of this technique. To clarify the mechanical properties and strengthening mechanisms, micro-tensile tests and transmission Kikuchi diffraction (TKD) were employed for characterization. The results reveal that the as-fabricated pure copper microstructures achieve a yield strength of 440 MPa. The interior exhibits an ultrafine grained microstructure with an average grain size of 557.7 nm and an initial aspect ratio of 1.53:1. In the micro-tensile deformed region, grains present an elongated morphology with a size increase of up to 133.4%. Microscopic mechanism analysis indicates that the high strength of the microstructures originates from the synergistic effect of grain refinement strengthening and interfacial strengthening.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Electrodeposition and Electroless Coatings · Nanoporous metals and alloys · Anodic Oxide Films and Nanostructures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. 3D-printed soft magnetoelectric microswimmers for delivery and differentiation of neuron-like cells[J]10.1002/adfm.201910323 ↗
2. 3D printed nervous system on a chip[J]10.1039/C5LC01270H ↗
3. Gigahertz electromagnetic structures via direct ink writing for radio-frequency oscillator and transmitter applications[J]10.1002/adma.201605198 ↗
4. Multiprocess 3D printing for increasing component functionality[J]10.1126/science.aaf2093 ↗
5. Piquéa A, Kima H, Auyeunga R C Y, et al. Laser-induced forward transfer (LIFT) of congruent voxels[J]. Applied Surface Science, 2016,374(Jun. 30): 42-48.10.1016/j.apsusc.2015.09.005 ↗
6. Printing functional 3D microdevices by laser-induced forward transfer[J]10.1002/smll.201602553 ↗
7. T T, H N, F I. Three-dimensional microfabrication using local electrophoresis deposition and a laser trapping technique[J]. Optics Express, 2014, 22(23): 28109-28117.10.1364/OE.22.028109 ↗
8. Direct printing of nanostructures by electrostatic autofocussing of ink nanodroplets[J]
9. Three-dimensional printing of silver microarchitectures using newtonian nanoparticle inks[J]10.1021/acsami.7b02581 ↗
10. Tunable 3D nanoresonators for gas-sensing applications[J]10.1002/adfm.201707387 ↗
11. Gas-assisted focused electron beam and ion beam processing and fabrication[J]10.1116/1.2955728 ↗
12. Laser interference lithography-defined electrochemical etching of ordered InP nanopore arrays[J]10.1039/D5NR04686F ↗
13. Effect of [Zn2+]/[Cu2+] ratio of the bath on the composition and property of Cu–Zn alloy micropillars prepared using microanode-guided electroplating[J]
14. Review of additive electrochemical micro-manufacturing technology[J]10.1016/j.ijmachtools.2021.103848 ↗
15. A review: development of the maskless localized electrochemical deposition technology[J]
16. Fabrication of micro-sized copper columns using localized electrochemical deposition with a 20µm diameter micro anode[J]10.1149/2.0111903jss ↗
17. Meniscus-confined three-dimensional electrodeposition for direct writing of wire bonds[J]10.1126/science.1190496 ↗
18. Self-regulated parallel process 3-D array microfabrication with metal direct-write[J]
19. Local surface modification via confined electrochemical deposition with FluidFM[J]10.1039/C5RA07239E ↗
20. Study on scanning probe-induced electrochemical deposition of atomic and close-to-atomic-scale structures[J]10.1007/s41871-024-00246-5 ↗
21. Effect of aliphatic-amine ethoxy sulfonates (AESS) on micro copper columns fabrication by using localized electrochemical deposition[J]10.1088/2053-1591/ab308e ↗
22. Direct 3D microprinting of highly conductive gold structures via localized electrodeposition[J]10.1016/j.matdes.2023.111780 ↗
23. An ultrasensitive bacteria biosensor using “multilayer cake” silver microelectrode based on local high electric field effect[J]10.1063/5.0090107 ↗
24. Electrochemical 3D printing of Ni–Mn and Ni–Co alloy with FluidFM[J]10.1088/1361-6528/ac5a80 ↗
25. Fabrication of Cu-Zn alloy micropillars by potentiostatic localized electrochemical deposition[J]10.1149/2.0501908jes ↗
26. Effect of [Zn2+]/[Cu2+] Ratio of the bath on the composition and property of Cu–Zn alloy micropillars prepared using microanode-guided electroplating[J]
27. Electrochemical 3D printing of superhydrophobic pillars with conical, cylindrical, and inverted conical shapes[J]10.1016/j.colsurfa.2021.126869 ↗
28. Direct writing of shape‐gradient magnetic alloy microwire arrays with meniscus‐confined electrodeposition process[J]10.1002/admt.202200024 ↗
29. A comprehensive research on polyethylene glycol assisted localized electrodeposition micro additive manufacturing method for fabricating high-quality 3D structures[J]10.1016/j.jmapro.2025.01.048 ↗
30. Additive manufacturing of multi‐metal microstructures by localized electrochemical deposition under hydrodynamic confinement[J]10.1002/admt.202301290 ↗
31. A flow-rate-controlled double-nozzles approach for electrochemical additive manufacturing[J]10.1080/17452759.2021.1989751 ↗
32. Liquid bridged deposition for 3D shaping[J]10.1016/j.jmatprotec.2025.118820 ↗
33. A novel strategy for electrochemical additive manufacturing: femtosecond laser-assisted localized electrochemical deposition[J]
34. Localized electrodeposition micro additive manufacturing of pure copper microstructures[J]
35. Localized electrochemical deposition manufacturing of microcantilevers with various tilt angles and simulation analysis[J]10.1016/j.sna.2026.117565 ↗
36. A meniscus morphology modulation method for meniscus-confined electrodeposition[J]
37. A novel method for determining AFM probe tip characteristics using trench-based reference material[J]10.1007/s41871-025-00262-z ↗
38. Accurate AFM calibration of indenter geometry for instrumented indentation[J]10.1007/s41871-025-00261-0 ↗
39. A new kind of atomic force microscopy scan control enabled by artificial intelligence: concept for achieving tip and sample safety through asymmetric control[J]10.1007/s41871-024-00229-6 ↗
40. Self-adjusting voxelated electrochemical three-dimensional printing of metallic microstructures[J]
41. Liquid-infused nanostructured composite as a high-performance thermal interface material for effective cooling[J]10.1038/s41467-025-56163-8 ↗
42. Microscale 3D printing of nanotwinned copper[J]10.1002/adma.201705107 ↗
43. Atomic force microscope-based meniscus-confined three-dimensional electrodeposition[J]10.1002/admt.201900827 ↗
44. Improved structural and optical properties of Cu2ZnSnS4 thin films via optimized potential in single bath electrodeposition[J]10.1016/j.electacta.2014.05.166 ↗
45. Vibration assisted polishing: study of material removal mechanism and construction of near-reality prediction model for surface morphology evolution process[J]10.1016/j.jmapro.2025.10.046 ↗
46. Study on the inhibition mechanism and removal mechanism of non-uniform removal of composite materials by multiphysics coupling polishing method[J]10.1016/j.jmatprotec.2025.118841 ↗
47. Localized pulsed electrodeposition process for threedimensional printing of nanotwinned metallic nanostructures[J]10.1021/acs.nanolett.7b03930 ↗
48. Toward control of microstructure in microscale additive manufacturing of copper using localized electrodeposition[J]10.1002/adem.201800946 ↗
49. Anomalous high strain rate compressive behavior of additively manufactured copper micropillars[J]
50. A B, S D, R M S, et al. Printing of Microscale Nanotwinned Copper Interconnections Using Localized Pulsed Electrodeposition (L-PED), 2018. [C]. ASME 2018 13th International Manufacturing Science and Engineering Conference, American Society of Mechanical Engineers Digital Collection, 2018.
51. Electrochemical gradients driven 3D printing of nano-twinned copper structures by direct current dynamic meniscus confined electrodeposition[J]
52. Jain M, Sharma A, SCHüRCH P, et al. Strengthening of 3D printed Cu micropillar in Cu-Ni core-shell structure[J]. Materials & Design, 2023, 227: 111717.10.1016/j.matdes.2023.111717 ↗
53. Ultralow flexural properties of copper microhelices fabricated via electrodeposition-based three-dimensional direct-writing technology[J]10.1039/C7NR03803H ↗
54. The Roles of Microprobe in Localized Electrodeposition: electrolyte Localized Transport and Force-Displacement sensitivity[J]10.1089/3dp.2022.0238 ↗
55. A unified mechanistic model for Hall–Petch and inverse Hall–Petch relations of nanocrystalline metals based on intragranular dislocation storage[J]10.1016/j.jmps.2021.104530 ↗