Microstructure dependent burst behavior of oxide dispersion–strengthened FeCrAl cladding
Source abstract
Abstract
Oxide dispersion–strengthened (ODS) FeCrAl alloys are an advanced cladding material that combines the high-temperature steam oxidation resistance of conventional wrought FeCrAl with the irradiation resistance and high-temperature strength of nanostructured ferritic alloys. In the present study, the effect of microstructure on the performance of the ODS FeCrAl alloy system in light-water reactor–accident scenarios is evaluated using a combination of experimentation and modeling. ODS FeCrAl alloy with nominal composition Fe-12Cr-6Al-0.3Zr-0.3Y2O3 was produced into a thin-walled tube via high-precision tube rolling. A portion of the as-received (AR) tube was subjected to a full recrystallization heat treatment. Both variants were subjected to burst testing at Oak Ridge National Laboratory’s Severe Accident Test Station. The recrystallized tube exhibited burst temperature margins 200 °C higher than that of C26M, whereas the AR tube only achieved burst properties comparable to the wrought FeCrAl alloy. The burst experiments were simulated in the BISON finite element code through the development of new viscoplastic material databases for each heat treatment condition, informed by high temperature tensile tests of tube specimens and existing literature data on creep mechanisms. Finally, an ODS FeCrAl burst criterion was obtained using simulated burst experiments across the entire range of test conditions.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Nuclear Materials and Properties · Fusion materials and technologies · Nuclear reactor physics and engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Accident tolerant fuels for LWRs: A perspective10.1016/j.jnucmat.2013.12.005 ↗
2. Advanced oxidation-resistant iron-based alloys for LWR fuel cladding10.1016/j.jnucmat.2013.06.041 ↗
3. High temperature oxidation of fuel cladding candidate materials in steam–hydrogen environments10.1016/j.jnucmat.2013.05.047 ↗
4. Uniform corrosion of FeCrAl cladding tubing for accident tolerant fuels in light water reactors10.1016/j.jnucmat.2021.153090 ↗
5. Cladding burst behavior of Fe-based alloys under LOCA10.1016/j.jnucmat.2015.12.018 ↗
6. Strength and rupture geometry of un-irradiated C26M FeCrAl under LOCA burst testing conditions10.1016/j.jnucmat.2021.153242 ↗
7. Alloy Design and Characterization of a Recrystallized FeCrAl-ODS Cladding for Accident-Tolerant BWR Fuels: An Overview of Research Activity in Japan10.1016/j.jnucmat.2023.154508 ↗
8. Modelling FeCrAl cladding thermo-mechanical performance: Part II: Comparative analysis with Zircaloy under LOCA conditions10.1016/j.pnucene.2023.104838 ↗
9. High-temperature creep deformation in FeCrAl-oxide dispersion strengthened alloy cladding10.1016/j.msea.2020.139863 ↗
10. Ultra-high temperature tensile properties of ODS steel claddings under severe accident conditions10.1016/j.jnucmat.2017.02.021 ↗
11. Transmission electron microscopy study of dislocation-dispersoid interaction in deformed incoloy ma95610.1016/S0956-716X(99)80060-0 ↗
12. Dislocation dynamics in the oxide dispersion strengthened alloy INCOLOY MA95610.1016/S0921-5093(99)00471-2 ↗
13. Behavior of FeCrAl-ODS cladding tube under loss-of-coolant accident conditions10.1016/j.jnucmat.2023.154467 ↗
14. Post irradiation examination of nanoprecipitate stability and α′ precipitation in an oxide dispersion strengthened Fe-12Cr-5Al alloy10.1016/j.scriptamat.2018.10.047 ↗
15. Advanced FeCrAl ODS steels for high-temperature structural applications in energy generation systems10.3989/revmetalm.1165 ↗
16. Development of Oxide Dispersion Strengthened Ferritic Steels for FBR Core Application, (I)10.1080/18811248.1997.9733658 ↗
17. Influence of the alloy grain size on the oxidation behaviour of PM2000 alloy10.1016/S0010-938X(01)00182-2 ↗
18. Multiscale investigations of nanoprecipitate nucleation, growth, and coarsening in annealed low-Cr oxide dispersion strengthened FeCrAl powder10.1016/j.actamat.2018.11.062 ↗
19. M. Snead, Y. Yan, M. Howell, J. Keiser, K. Terrani, Severe Accident Test Station Design Document, ORNL/TM-2015/556, Oak Ridge National Laboratory (2015).10.2172/1252142 ↗
20. MOOSE: Enabling massively parallel multiphysics simulation10.1016/j.softx.2020.100430 ↗
21. BISON: A Flexible Code for Advanced Simulation of the Performance of Multiple Nuclear Fuel Forms10.1080/00295450.2020.1836940 ↗
22. K.G. Field, M.A. Snead, Y. Yamamoto, K.A. Terrani, Handbook on the Material Properties of FeCrAl Alloys for Nuclear Power Production Applications (FY18 Version: Revision 1), United States, 2018, p. Medium: ED; Size: 68 p.10.2172/1474581 ↗
23. Grain Boundary Related Deformation in ODS Ferritic Steel during Creep Test10.2320/matertrans.M2012143 ↗
24. Flow stress, subgrain size, and subgrain stability at elevated temperature10.1007/BF02661565 ↗
25. Insights from microstructure and mechanical property comparisons of three pilgered ferritic ODS tubes10.1016/j.matdes.2021.110333 ↗
26. Miller · 2012
27. Development of accident tolerant FeCrAl-ODS fuel cladding for BWRs in Japan10.1016/j.jnucmat.2021.153276 ↗
28. R. Chapman, Multirod Burst Test Program progress report, July--December 1977.[BWR; PWR], Oak Ridge National Lab., Tenn.(USA), 1978.10.2172/5716364 ↗
29. Effect of Cold Rolling on Recrystallization Behavior of Al-Free and Al-Added 15Cr-ODS Ferritic Steels10.3390/cryst9030145 ↗
30. Microstructural and micro-mechanical analysis of 14YWT nanostructured Ferritic alloy after varying thermo-mechanical processing paths into tubing10.1016/j.matchar.2020.110744 ↗
31. Recrystallisation-assisted creep of an austenitic Fe-Ni alloy under low stresses after hot deformation10.1016/j.actamat.2018.04.050 ↗
32. Two-Dimensional observation of grain boundary sliding of ODS ferritic steel in high temperature tension10.2320/matertrans.M2014115 ↗
33. Creep and damage anisotropies of 9%Cr and 14%Cr ODS steel cladding10.1016/j.jnucmat.2019.02.041 ↗
34. Metrics for the technical performance evaluation of light water reactor accident-tolerant fuel10.13182/NT15-149 ↗
35. A critical review of high burnup fuel fragmentation, relocation, and dispersal under loss-of-coolant accident conditions10.1016/j.jnucmat.2020.152750 ↗
36. Post-irradiation fracture toughness characterization of generation II FeCrAl alloys, pressure vessels and piping conference
37. Improved irradiation resistance of accident-tolerant high-strength FeCrAl alloys with heterogeneous structures10.1016/j.actamat.2022.117843 ↗
38. Deconvoluting the effect of chromium and aluminum on the radiation response of wrought FeCrAl alloys after low-dose neutron irradiation10.1016/j.jnucmat.2021.152804 ↗
39. Designing radiation resistance in materials for fusion energy10.1146/annurev-matsci-070813-113627 ↗
40. Theory and experimental background on dimensional changes in irradiated alloys10.1016/0022-3115(94)90009-4 ↗