Precision control of oxygen content in CP-Ti for ultra-high strength through titanium oxide decomposition: An in-situ study
Source abstract
Abstract
Oxygen has been known as an effective strengthening element in titanium (Ti) and its alloys. However, an over-dose of oxygen can also lead to embrittlement of Ti alloys. To precisely control and push the limit of oxygen in Ti and its alloys, we studied the decomposition process of Ti oxides in pure α-Ti matrix using an in-situ high-temperature scanning electron microscope. The experimental results revealed that TiO particles decomposed in α-Ti at elevated temperatures and the oxygen atoms gradually diffused into the matrix, following the Fick’s second law. Then, the samples with different oxygen contents were produced using the aforementioned strategy, for which the oxygen content, microstructure, and mechanical properties were measured. The results revealed that the oxygen content can be precisely controlled, which can achieve an ultra-high tensile strength of close to 1100 MPa, at no expense of elongation-to-failure, with incorporating 0.87 wt% oxygen. An analysis showed that the strength contribution from oxygen follows the Labusch law. These findings offer a novel approach to design high-performance Ti alloys with non-toxic and cheap elements.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. ASB induced phase transformation in high oxygen doped commercial purity Ti10.1016/j.msea.2021.142321 ↗
2. Oxygen diffusion hardening of Ti-Nb-Zr Alloys10.1080/10426919608947472 ↗
3. Titanium coatings and surface modifications: toward clinically useful bioactive implants10.1021/acsbiomaterials.6b00604 ↗
4. In situ EBSD investigation of deformation processes and strain partitioning in bi-modal Ti-6Al-4V using lattice rotations10.1016/j.actamat.2019.04.033 ↗
5. Micro-compression of high oxygen doped single-crystal titanium along different orientations10.1016/j.msea.2021.142449 ↗
6. Titanium alloys for biomedical applications10.1016/j.msec.2005.08.032 ↗
7. Biomedical applications of titanium and its alloys, JOM: the journal of the Minerals10.1007/s11837-008-0031-1 ↗
8. Cytotoxicity of Titanium and Titanium Alloying Elements10.1177/0022034510363675 ↗
9. Microstructure regulation of titanium-oxygen alloy with high strength and excellent ductility for biomedical applications10.1016/j.intermet.2022.107648 ↗
10. Low modulus Ti-Nb-Hf alloy for biomedical applications10.1016/j.msec.2014.06.010 ↗
11. Ti-Mo Alloys Used in Medical Applications
12. Effects of Ta content on Young’s modulus and tensile properties of binary Ti–Ta alloys for biomedical applications10.1016/j.msea.2003.12.011 ↗
13. New Ti-Mo-Si materials for bone prosthesis applications10.1016/j.jmbbm.2020.104198 ↗
14. Baltatu · Promising Materials for Medical Devices, Materials (Basel) · 2021 · 14
15. Ductility improvement of high-strength Ti–O material upon heteromicrostructure formation10.1016/j.msea.2022.143041 ↗
16. The role of nitrogen in the oxidation behaviour of a Ti6242S alloy: a nanoscale investigation by atom probe tomography10.1016/j.actamat.2021.117134 ↗
17. An in-situ study on deformation and cracking initiation in oxygen-doped commercial purity titanium10.1016/j.mechmat.2020.103519 ↗
18. Mechanical property enhancement of high-plasticity powder metallurgy titanium with a high oxygen concentration10.1016/j.jallcom.2021.161006 ↗
19. Fabrication of high-strength Ti materials by in-process solid solution strengthening of oxygen via P/M methods10.1016/j.msea.2012.11.058 ↗
20. Mechanical properties and biocompatibility of titanium with a high oxygen concentration for dental implants10.1016/j.msec.2020.111306 ↗
21. Oxygen solutes induced anomalous hardening, toughening and embrittlement in body-centered cubic vanadium10.1016/j.actamat.2020.06.023 ↗
22. Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes10.1038/s41586-018-0685-y ↗
23. Review of effect of oxygen on room temperature ductility of titanium and titanium alloys10.1179/1743290114Y.0000000108 ↗
24. Mechanistic basis of oxygen sensitivity in titanium, Science
25. Preparation method of low-oxygen Ti-6Al-4V alloy by solid state re-deoxidation using calcium10.1080/02670836.2019.1583846 ↗
26. High oxygen-content titanium and titanium alloys made from powder10.1016/j.jallcom.2020.155526 ↗
27. Study of titanium alloy Ti6242S oxidation behaviour in air at 560°C: Effect of oxygen dissolution on lattice parameters10.1016/j.corsci.2019.06.004 ↗
28. Diffusion of oxygen in β-titanium10.1016/j.scriptamat.2008.05.037 ↗
29. Enhanced work hardening from oxygen-stabilized ω precipitates in an aged metastable β Ti-Nb alloy10.1016/j.actamat.2021.117302 ↗
30. Advanced mechanical properties of powder metallurgy commercially pure titanium with a high oxygen concentration10.1557/jmr.2017.338 ↗
31. Direct diffusion through interpenetrating networks: oxygen in titanium10.1103/PhysRevLett.107.045504 ↗
32. Role of oxygen on the precipitation and deformation behavior of an aged β Ti-15Mo alloy10.1016/j.jallcom.2021.161811 ↗
33. Design of high strength and wear-resistance β-Ti alloy via oxygen-charging10.1016/j.actamat.2022.117686 ↗
34. Literature Survey on Diffusivities of Oxygen, Aluminum, and Vanadium in Alpha Titanium, Beta Titanium, and in Rutile10.1007/BF02628396 ↗
35. Diffusion of Nitrogen and Oxygen in Titanium
36. Low-valence titanium oxides synthesized by electric field control as novel conversion anodes for high performance sodium-ion batteries10.1039/D0TA12552K ↗
37. C. Leyens, M. Peters, Titanium and Titanium Alloys: Fundamentals and Applications, 2003.10.1002/3527602119 ↗
38. Temperature dependence of oxide decomposition on titanium surfaces in ultrahigh vacuum10.1116/1.1500746 ↗
39. Dynamic recrystallization and texture evolution of Ti-22Al-25Nb alloy during plane-strain compression10.1016/j.jallcom.2018.03.372 ↗
40. Origin of dramatic oxygen solute strengthening effect in titanium10.1126/science.1260485 ↗
41. The effect of hydrogen on mechanical properties of oxygen-strengthened titanium10.1016/0036-9748(89)90228-7 ↗
42. The effect of grain size on yield stress and work hardening of polycrystalline titanium at 295 K and 575 K10.1016/0025-5416(78)90171-4 ↗
43. Tensile properties improvement by homogenized nitrogen solid solution strengthening of commercially pure titanium through powder metallurgy process10.1016/j.matchar.2020.110700 ↗
44. Analysis of microstructure and strengthening in pure titanium recycled from machining chips by equal channel angular pressing using electron backscatter diffraction10.1016/j.msea.2012.01.039 ↗
45. Effect of interstitial solutes on the strength and ductility of titanium10.1016/0079-6425(81)90001-3 ↗
46. Thermal activation mechanisms and Labusch-type strengthening analysis for a family of high-entropy and equiatomic solid-solution alloys10.1016/j.actamat.2016.08.047 ↗
47. Solution hardening10.1016/0001-6160(61)90242-5 ↗
48. Solution hardening by tetragonal dist ortions: Application to irradiation hardening in F.C.C. crystals10.1016/0001-6160(62)90098-6 ↗
49. Substitutional solution hardening10.1016/0001-6160(63)90213-X ↗
50. A Statistical Theory of Solid Solution Hardening, Physica Status Solidi B-basic10.1002/pssb.19700410221 ↗
51. Mechanisms of tensile strengthening and oxygen solid solution in single β-phase Ti-35 at.%Ta+O alloys10.1016/j.msea.2020.140677 ↗
52. Quantitative analysis on light elements solution strengthening in pure titanium sintered materials by labusch model using experimental data10.2320/matertrans.Y-M2018849 ↗