Enhanced precipitation strengthening of multi-principal element alloys by κ- and B2-phases
Source abstract
Abstract
Discoveries of new multi-principal element alloys (MPEAs) with outstanding performance have been challenging due to the large complexity of the compositional space. Many existing highly alloyed steels already incorporate MPEA concepts and detailed research is readily available, which can be utilized for a more efficient design approach. Inspired by this consideration, Ni- and Co-additions to the Al14.6C4.9Fe53.6Mn26.9 (at%) high‑manganese steel were assessed to introduce B2-precipitates in addition to the κ-carbides to increase strength. Thermodynamic screening in the Al-C-Co-Fe-Mn-Ni system was performed with a custom calphad database and combined with experimental screening to identify novel MPEAs with enhanced mechanical properties. The selected MPEAs were produced by thermo-mechanical processing and the mechanisms active during annealing and deformation were investigated experimentally. The modification with Co did not result in the formation of B2-precipitates and improved mechanical properties. The Ni-added MPEA, Al14.7C4.7Fe49.9Mn26.4Ni4.2, revealed significant precipitation and dispersion hardening by nanoscale κ- and B2-phases combined with excellent strain hardening capacity due to slip band refinement-induced plasticity (SRIP). A combination of 1 to 1.2 GPa yield strength (21.3 % increase) with a total elongation of 20 to 10 % was achieved. The chosen methodology was efficient in the design of a novel MPEA with an improved strength-ductility synergy.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (70)
Show source-provided references
1. Chapter 1 - a brief history of alloys and the birth of high-entropy alloys
2. Mixed-up metals make for stronger, tougher, stretchier alloys10.1038/533306a ↗
3. Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
4. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
5. High-entropy alloys: a critical review10.1080/21663831.2014.912690 ↗
6. Non-equiatomic high entropy alloys: approach towards rapid alloy screening and property-oriented design10.1016/j.msea.2015.09.010 ↗
7. Exploration and development of high entropy alloys for structural applications10.3390/e16010494 ↗
8. Accelerated exploration of multi-principal element alloys for structural applications10.1016/j.calphad.2015.04.009 ↗
9. Ab initio phase stabilities and mechanical properties of multicomponent alloys: a comprehensive review for high entropy alloys and compositionally complex alloys10.1016/j.matchar.2018.06.019 ↗
10. Impact of interstitial C on phase stability and stacking-fault energy of the CrMnFeCoNi high-entropy alloy10.1103/PhysRevMaterials.3.113603 ↗
11. Combined Al and C alloying enables mechanism-oriented design of multi-principal element alloys: Ab initio calculations and experiments10.1016/j.scriptamat.2019.12.004 ↗
12. Ab initio assisted design of quinary dual-phase high-entropy alloys with transformation-induced plasticity10.1016/j.actamat.2017.07.023 ↗
13. Combinatorial exploration of the high entropy alloy system co-Cr-Fe-Mn-Ni10.1016/j.surfcoat.2017.06.041 ↗
14. Rapid alloy development of extremely high-alloyed metals using powder blends in laser powder bed fusion10.3390/ma12101706 ↗
15. High entropy alloys: a focused review of mechanical properties and deformation mechanisms10.1016/j.actamat.2019.12.015 ↗
16. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
17. A general perspective of Fe–Mn–Al–C steels10.1007/s10853-018-2551-6 ↗
18. New trends in advanced high strength steel developments for automotive application10.4028/www.scientific.net/MSF.638-642.136 ↗
19. Current state of Fe-Mn-Al-C low density steels10.1016/j.pmatsci.2017.05.002 ↗
20. Microband-induced plasticity in a high Mn-Al-C light steel10.1016/j.msea.2008.05.042 ↗
21. Low-density steels: complex metallurgy for automotive applications10.1007/s11837-014-1084-y ↗
22. Combined κ-carbide precipitation and recovery enables ultra-high strength and ductility in light-weight steels10.1016/j.msea.2020.139928 ↗
23. Effects of Al addition on structural evolution and tensile properties of the FeCoNiCrMn high-entropy alloy system10.1016/j.actamat.2013.09.037 ↗
24. Effects of AL addition on microstructure and mechanical properties of AlxCoCrFeNi high-entropy alloy10.1016/j.msea.2015.09.034 ↗
25. Effect of annealing heat treatment on microstructural evolution and tensile behavior of Al0.5CoCrFeMnNi high-entropy alloy10.1016/j.msea.2018.05.041 ↗
26. Brittle intermetallic compound makes ultrastrong low-density steel with large ductility10.1038/nature14144 ↗
27. Strain hardening in Fe–16Mn–10Al–0.86C–5Ni high specific strength steel10.1016/j.actamat.2016.02.044 ↗
28. Effect of Ni alloying on the microstructural evolution and mechanical properties of two duplex light-weight steels during different annealing temperatures: experiment and phase-field simulation10.1016/j.actamat.2017.03.043 ↗
29. Shock and spall behaviors of a high specific strength steel: effects of impact stress and microstructure10.1063/1.4979346 ↗
30. Nano-mechanical properties of Fe-Mn-Al-C lightweight steels10.1038/s41598-018-27345-w ↗
31. Strain hardening of novel high Al low-density steel consisting of austenite matrix and B2-ordered intermetallic second phase in the perspective of non-cell forming face-centered-cubic alloy with high stacking fault energy10.1016/j.scriptamat.2018.09.044 ↗
32. Improvement of strength – ductility balance of B2-strengthened lightweight steel10.1016/j.actamat.2020.03.022 ↗
33. Combining thermodynamic modeling and 3D printing of elemental powder blends for high-throughput investigation of high-entropy alloys – towards rapid alloy screening and design10.1016/j.msea.2017.01.099 ↗
34. On the deformation behavior of κ-carbide-free and κ-carbide-containing high-Mn light-weight steel10.1016/j.actamat.2016.10.006 ↗
35. κ-phase formation in Fe-Mn-Al-C austenitic steels10.1002/srin.201400587 ↗
36. Grain detection from 2d and 3d EBSD data-specification of the MTEX algorithm10.1016/j.ultramic.2011.08.002 ↗
37. Orientations – perfectly colored10.1107/S1600576716012942 ↗
38. Hammersley · 1997
39. Two-dimensional detector software: from real detector to idealised image or two-theta scan10.1080/08957959608201408 ↗
40. Method for the simultaneous determination of anisotropic residual stresses and texture by x-ray diffraction10.1063/1.358006 ↗
41. PTCLab: free and open-source software for calculating phase transformation crystallography10.1107/S1600576716006075 ↗
42. An overview of the effects of alloying elements on the properties of lightweight Fe-(15–35) Mn-(5–12) Al-(0.3–1.2) C steel10.1007/s11837-018-2837-9 ↗
43. Strengthening and strain hardening mechanisms in a precipitation-hardened high-Mn lightweight steel10.1016/j.actamat.2017.08.049 ↗
44. Effect of aging isothermal time on the microstructure and room-temperature impact toughness of Fe–24.8Mn–7.3Al–1.2C austenitic steel with κ-carbides precipitation10.1007/s12540-018-0112-9 ↗
45. Control of inter/intra-granular κ-carbides and its influence on overall mechanical properties of a Fe-11Mn-10Al-1.25C low density steel10.1016/j.msea.2017.12.102 ↗
46. Atomistic study of nano-sized κ-carbide formation and its interaction with dislocations in a cast Si added FeMnAlC lightweight steel10.1016/j.msea.2016.07.029 ↗
47. Influence of κ-carbide interface structure on the formability of lightweight steels10.1016/j.matdes.2016.05.021 ↗
48. Atomistic investigations of κ-carbide precipitation in austenitic Fe-Mn-Al-C lightweight steels and the effect of Mo addition10.1016/j.scriptamat.2016.08.036 ↗
49. High strength and ductile low density austenitic FeMnAlC steels: simplex and alloys strengthened by nanoscale ordered carbides10.1179/1743284714Y.0000000515 ↗
50. Experimental observation of κ-phase formation sequences by in-situ synchrotron diffraction10.1016/j.matlet.2019.01.062 ↗
51. Combined atom probe tomography and density functional theory investigation of the Al off-stoichiometry of κ-carbides in an austenitic Fe-Mn-Al-C low density steel10.1016/j.actamat.2016.01.007 ↗
52. Microstructural evolution and strain hardening behavior during plastic deformation of Fe-12Mn-8Al-0.8C steel10.1016/j.msea.2013.07.023 ↗
53. The fcc-bcc crystallographic orientation relationship in AlxCoCrFeNi high-entropy alloys10.1016/j.matlet.2016.04.086 ↗
54. Novel ultra-high-strength cu-containing medium-Mn duplex lightweight steels10.1016/j.actamat.2017.06.035 ↗
55. Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation10.1038/nature22032 ↗
56. Strain hardening by dynamic slip band refinement in a high-Mn lightweight steel10.1016/j.actamat.2016.06.037 ↗
57. Recrystallization behavior in a low-density high-Mn high-Al austenitic steel undergone thin strip casting process10.1016/j.msea.2018.07.023 ↗
58. Microstructures and mechanical properties of high-strength Fe-Mn-Al-C light-weight TRIPLEX steels10.1002/srin.200606440 ↗
59. Origin of extended tensile ductility of a Fe-28Mn-10Al-1C steel10.1007/s11661-009-9862-9 ↗
60. Tensile deformation behavior analysis of low density Fe-18Mn-10Al-xC steels10.1016/j.msea.2015.11.071 ↗
61. Influence of Al content and precipitation state on the mechanical behavior of austenitic high-Mn low-density steels10.1016/j.scriptamat.2012.08.038 ↗
62. On the origin of planar slip in f.c.c. alloys10.1016/0001-6160(89)90143-0 ↗
63. Combined deformation twinning and short-range ordering causes serrated flow in high-manganese steels10.1016/j.msea.2019.01.042 ↗
64. The effect of carbon on the microstructures, mechanical properties, and deformation mechanisms of thermo-mechanically treated Fe40.4Ni11.3Mn34.8Al7.5Cr6 high entropy alloys10.1016/j.actamat.2016.12.074 ↗
65. Microband induced plasticity and the temperature dependence of the mechanical properties of a carbon-doped FeNiMnAlCr high entropy alloy10.1016/j.matchar.2018.03.017 ↗
66. Effect of aging on the microstructure and deformation behavior of austenite base lightweight Fe-28Mn-9Al-0.8C steel10.1016/j.scriptamat.2010.07.036 ↗
67. Dispersion strengthened aluminum made by mechanical alloying
68. Oxide dispersion-strengthened steels: a comparison of some commercial and experimental alloys10.1016/j.jnucmat.2005.01.017 ↗
69. Raman · 2016
70. Oxide dispersion strengthened CoCrFeNiMn high-entropy alloy10.1016/j.msea.2017.02.068 ↗