journal article·2020-01Open access

Microalloying effects of Mo versus Cr in HSLA steels with ultrafine-grained ferrite microstructures

Carina Ledermueller, Hafsah Indrianita Pratiwi, Richard F. Webster, Mehdi Eizadjou, Simon P. Ringer, Sophie Primig

Materials & Design· Volume 185

Abstract

Thermo-mechanical processing with warm-deformation in the ferrite is a promising pathway towards manufacturing of large volumes of steels with ultrafine grain sizes. We apply this processing to HSLA steels to invoke grain refinement coupled with strengthening arising from microalloying. The aim is to systematically unravel the strengthening via the addition of ‘modern’ microalloying elements Mo versus Cr besides Nb. These elements have been proposed to provide significant additional strengthening during such processing but the mechanisms yet remain unknown. Therefore, three model Fe-1.6Mn-0.04C-0.1Nb+0.5Mo/Cr steels were warm-rolled at ∼600 °C with an overall reduction of 50% followed by ageing. It was found that Mo leads to an increase in hardness of ∼20% compared to the base alloy, whereas Cr provides only a minor hardening increment. SEM, EBSD, TEM and atom probe were used to reveal the beneficial effect of Mo versus Cr. It was found that Mo is more effective delaying dislocation recovery. We also report that Mo partitions into nanoscale Nb–C solute clusters and precipitates of NbC and Fe3C during ageing, retarding the coarsening of these phases. However, Cr was found to partition into Fe3C only, and does not contribute to the nature of the dispersion of clusters and NbC.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Modern HSLA steels and role of non-recrystallisation temperature10.1179/1743280411Y.0000000013 ↗
2. Overview of processing, microstructure and mechanical properties of ultrafine grained bcc steels10.1016/j.msea.2006.08.095 ↗
3. Strain-hardening due to dispersed cementite for low carbon ultrafine-grained steels10.2355/isijinternational.44.1063 ↗
4. A new route to fabricate ultrafine-grained structures in carbon steels without severe plastic deformation10.1016/j.scriptamat.2008.09.002 ↗
5. Improvement of the work hardening rate of ultrafine grained steels through second phase particles10.1016/j.scriptamat.2005.02.016 ↗
6. Engineering hierarchical microstructures via advanced thermo-mechanical processing of a modern HSLA steel10.1007/s11661-018-4934-3 ↗
7. Optimization of advanced thermo-mechanical process design for a modern HSLA steel10.1007/s11661-019-05486-5 ↗
8. Principal effects of Mo in HSLA steels and cross effects with microalloying elements
9. On the strength of microalloyed steels - an interpretive review10.1179/174328409X455233 ↗
10. Microalloyed steels10.1179/1743281215Y.0000000063 ↗
11. Direct observation of niobium segregation to dislocations in steel10.1016/j.actamat.2016.01.070 ↗
12. Akben · 1983 · vol. 31 · 161
13. Quantitative analysis of Mo solute drag effect on ferrite and bainite transformations in Fe-0.4C-0.5Mo alloy10.1016/j.actamat.2019.07.040 ↗
14. Carbide precipitation and high-temperature strength of hot-rolled high-strength, low-alloy steels containing Nb and Mo10.1007/s11661-002-0178-2 ↗
15. AP-FIM study on the effect of Mo addition on microstructure in Ti-Nb steel10.1016/0169-4332(94)90351-4 ↗
16. Precipitation of MC phase and precipitation strengthening in hot rolled Nb-Mo and Nb-Ti steels10.1007/s10853-007-2000-4 ↗
17. Compositional evolution of microalloy carbonitrides in a Mo-bearing microalloyed steel10.1016/j.scriptamat.2012.09.027 ↗
18. Strengthening mechanisms and their relative contributions to the yield strength of microalloyed steels10.1007/s11661-012-1135-3 ↗
19. Interphase precipitation in Ti–Nb and Ti–Nb–Mo bearing steel10.1179/1743284712Y.0000000131 ↗
20. Clustering and precipitation processes in a ferritic titanium-molybdenum microalloyed steel10.1016/j.jallcom.2016.08.146 ↗
21. Strengthening mechanism of hot rolled Ti and Nb microalloyed HSLA steels containing Mo and W with various coiling temperature10.1016/j.msea.2012.09.098 ↗
22. Heat treatment and effects of Cr and Ni in low alloy steel10.1007/s12034-011-0340-9 ↗
23. Pereloma · 2007 · 4214
24. Precipitate characterisation of an advanced high-strength low-alloy (HSLA) steel using atom probe tomography10.1016/j.scriptamat.2006.12.018 ↗
25. Effect of Cr and Al additions on the development of interphase-precipitated carbides strengthened dual-phase Ti-bearing steels10.1016/j.matdes.2017.01.071 ↗
26. On the spheroidizing annealing behavior in Cr/Nb microalloyed medium carbon steels
27. Comparative effect of Mo and Cr on microstructure and mechanical properties in NbV-microalloyed bainitic steels10.3390/met8020134 ↗
28. Gault · 2012
29. A model of continuous dynamic recrystallization10.1016/S1359-6454(03)00078-8 ↗
30. Grain boundary segregation of phosphorus and molybdenum in a Cr – Mo low alloy steel10.1179/026708304225010307 ↗
31. Microstructure characterization of nanometer carbides heterogeneous precipitation in Ti-Nb and Ti-Nb-Mo steel10.1016/j.matchar.2013.11.016 ↗
32. Composition of vanadium carbonitride precipitates in microallyed austenite10.1016/0036-9748(84)90114-5 ↗
33. Influence of deformation on the precipitation behavior of Nb(CN) in austenite and ferrite10.1007/s11661-014-2373-3 ↗
34. Stability of (Ti, M)C (M = Nb, V, Mo and W) carbide in steels using first-principles calculations10.1016/j.actamat.2011.09.051 ↗
35. Energy for the interface system of (Nb, Mo)C/γ-Fe10.1007/s00339-017-1120-1 ↗
36. Precipitation and clustering in a Ti-Mo steel investigated using atom probe tomography and small-angle neutron scattering10.1016/j.msea.2018.01.070 ↗
37. Microstructural characterization of warm rolled Cr-containing low carbon steel10.1016/j.scriptamat.2006.11.027 ↗
38. Strengthening from Nb-rich clusters in a Nb-microalloyed steel10.1016/j.scriptamat.2012.01.029 ↗