Structural properties of MgO–ZrO2 ceramics obtained by conventional sintering, arc melting and field assisted sintering technique
Source abstract
Abstract
Abstract MgO–ZrO2 ceramics were obtained by three different methods: conventional sintering, arc melting and field assisted sintering. The present study was undertaken in order to determine the influence of the different sintering techniques on the structural properties of MgO–ZrO2 ceramics. The phase compositions of the obtained samples consisted of MgO and ZrO2 cub. ss (doped by MgO). The amount of all phases in the final product and their average crystallite sizes are strongly influenced by the sintering method. The smallest crystallites were realized for ceramics consolidated by the field assisted sintering method (20.1 ± 2.5 nm for MgO and 27.0 ± 2.7 nm for ZrO2 cub. ss). About ten times larger crystallites resulted by conventional sintering. The average crystallite size in the material obtained by arc melting technique was around 116 ± 20.4 nm. It was observed that the microstructures of the samples prepared by arc melting and field assisted sintering are similar.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Magnesium Oxide Properties and Applications · Microwave Dielectric Ceramics Synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Review zirconia as a ceramic biomaterial10.1016/S0142-9612(98)00010-6 ↗
2. Theoretical calculations of thermodynamic properties of tetragonal ZrO210.1016/j.commatsci.2012.07.008 ↗
3. Microstructure and phase composition of ZrO2–MgO structural ceramic after high-temperature deformation10.1016/S0254-0584(02)00590-4 ↗
4. In-situ TEM observations of tetragonal to monoclinic phase transformation in ZrO2–2mol% Y2O3 ceramics10.1016/S0272-8842(97)00016-3 ↗
5. Transformation behaviour of tetragonal zirconia: role of dopant content and distribution10.1016/j.msea.2003.08.063 ↗
6. Influence of Fe doping on magnetic properties of ZrO2 nanocrystals10.1016/j.jallcom.2015.01.257 ↗
7. Facile synthesis and characterization of monocrystalline cubic ZrO2 nanoparticles10.1016/j.solidstatesciences.2007.07.033 ↗
8. Influence of yttria content on phase composition and mechanical properties of Y-PSZ10.1016/0272-8842(85)90251-2 ↗
9. Determination of CaO activity in the mixture {xCaO+(1−x)ZrO2} at the temperature 1270K by a galvanic cell involving calcium-ion conducting solid electrolyte10.1006/jcht.1995.0075 ↗
10. Zirconia stabilized with a mixture of the rare earth oxides10.1016/0955-2219(92)90020-E ↗
11. CaO-containing tetragonal ZrO2 polycrystals (Ca-TZP)10.1016/0272-8842(87)90048-4 ↗
12. The obtainment and properties of calcia-TZP10.1016/0272-8842(88)90028-4 ↗
13. High energy X-ray diffraction study of a dental ceramics-titanium functional gradient material prepared by field assisted sintering technique10.1016/j.matchar.2014.06.018 ↗
14. Structures of the ZrO2 polymorph at room temperature by high-resolution neutron powder diffraction10.1107/S0108768187010279 ↗
15. Nanocrystalline growth activation energy of zirconia polymorphs synthesized by mechanochemical technique10.1016/j.jmst.2013.10.012 ↗
16. Pure cubic ZrO2 nanoparticles by thermolysis of a new precursor10.1016/j.poly.2009.06.032 ↗
17. Low temperature synthesis of pure cubic ZrO2 nanopowder: structural and luminescence studies10.1016/j.saa.2013.11.043 ↗
18. Densification and properties of zirconia prepared by three different sintering techniques10.1016/j.ceramint.2006.07.005 ↗
19. Current-activated, pressure-assisted densification of materials10.1146/annurev-matsci-070909-104433 ↗
20. Electric current activation of sintering: a review of the pulsed electric current sintering process10.1111/j.1551-2916.2010.04210.x ↗
21. SEM-assisted thermophysical and mechanical properties of sintered MgO–ZrO2 composite10.1016/j.egypro.2013.07.100 ↗
22. Crystallographic and microchemical characterization of the early stages of eutectoid decomposition in MgO–partially stabilized ZrO210.1016/S0955-2219(01)00239-4 ↗
23. Ionic conductivity of fully stabilized ZrO: MgO and blocking effects10.1016/0955-2219(95)91299-4 ↗
24. Dual phase MgO–ZrO2 ceramics for use in LWR inert matrix fuel10.1016/j.jnucmat.2005.03.017 ↗
25. Thermal conductivity and acid dissolution behavior of MgO–ZrO2 ceramics for use in LWR inert matrix fuel10.1016/j.jnucmat.2005.10.009 ↗
26. Environmental behavior of ZrO2–MgO ceramics containing UO210.1524/ract.2011.1884 ↗
27. Effects of residual stress on thickness and interlayer of thermal barrier ceramic MgO–ZrO coatings on Ni and AlSi substrates using finite element method10.1016/S0261-3069(02)00047-X ↗
28. Fabrication and stabilization of nanocrystalline ordered mesoporous MgO–ZrO2 solid solution10.1016/j.micromeso.2011.03.015 ↗
29. Fundamental investigations on the spark plasma sintering/synthesis process: II modeling of current and temperature distributions10.1016/j.msea.2004.11.019 ↗
30. Finite element modeling of electric current-activated sintering: the effect of coupled electrical potential, temperature and stress10.1016/j.actamat.2007.02.022 ↗
31. A profile refinement method for nuclear and magnetic structures10.1107/S0021889869006558 ↗
32. Recent advances in magnetic structure determination by neutron powder10.1016/0921-4526(93)90108-I ↗
33. Bestimmung der Größe und der inneren Struktur von Kolloidteilchen mittels Röntgenstrahlen
34. Optimization and calculation of the ZrO2–MgO system10.1016/0364-5916(91)90026-G ↗
35. Study on thermal expansion and thermal shock resistance of MgO–PSZ10.1016/S0167-2738(98)00529-3 ↗
36. The adsorption of human serum albumin (HSA) on CO2 laser modified magnesia partially stabilised zirconia (MgO–PSZ)10.1016/j.colsurfb.2003.12.008 ↗
37. Fatigue behaviour of hot pressed austenitic TWIP steel and TWIP steel/Mg–PSZ composite materials10.1016/j.ijfatigue.2013.11.025 ↗
38. Mechanical and thermal shock properties of size graded MgO–PSZ refractory10.1016/S0955-2219(99)00243-5 ↗
39. Liquidus curve measurements in the ZrO2–MgO system with the solar Furnace10.1246/bcsj.41.1583 ↗
40. Experimental determination and thermodynamic calculation of the zirconia–calcia–magnesia system at 1600°, 1700°, and 1750°C10.1111/j.1151-2916.2004.tb07503.x ↗
41. Phase relation in the ZrO2–MgO system10.1111/j.1151-2916.1967.tb15111.x ↗
42. Optimization and calculation of the ZrO2–MgO system
43. Temperature and common-ion effect on magnesium oxide (MgO) hydration10.1016/j.ceramint.2009.12.009 ↗
44. Chelants to inhibit magnesia (MgO) hydration10.1016/j.ceramint.2011.01.030 ↗
45. A novel approach for magnesia hydration assessment in refractory castables10.1016/j.ceramint.2006.01.004 ↗
46. Kinetic study of the hydration of magnesium oxide for a chemical heat pump10.1016/1359-4311(96)00009-9 ↗
47. The analysis of magnesium oxide hydration in three-phase reaction system10.1016/j.jssc.2014.01.036 ↗
48. Kinetics of vapor-phase hydration of magnesium oxide10.1111/j.1151-2916.1963.tb14602.x ↗
49. An experimental study on hydration of various magnesia raw materials
50. Investigation on performance of zirconia and magnesia–zirconia stationary phases in hydrophilic interaction chromatography10.1016/j.talanta.2014.06.016 ↗
51. Mechanical behavior characterization of high zirconia fused-cast refractories at high temperature: influence of the cooling stage on microstructural changes10.1016/j.jeurceramsoc.2012.04.043 ↗