Predicting processing parameters in high temperature laser sintering (HT-LS) from powder properties
Source abstract
Abstract
Abstract New materials for laser sintering (LS) are usually developed using a trial and-error approach that consists of a series of builds within LS systems. This strategy is time consuming, costly and focuses only on the optimisation of the processing parameters, ignoring the powder properties of the materials under examination. Being able to predict processing parameters on the basis of the powder material properties would enable a faster development of new materials and new applications, while acknowledging a more in-depth understanding of the mechanisms involved in LS. This paper provides new results into the prediction of processing conditions from the material properties. It is here shown that high temperature polymers such as poly ether ether ketone (PEEK) and poly aryl ether ketone (PEK) can be successfully used in LS despite the lack of a super-cooling window. The evaluation of the stable sintering region of PEEK 450PF and the application of the energy melt ratio parameter in relation to the mechanical performance of laser sintered PEEK samples are also provided. Lastly, a new method for estimating the powder bed temperature is proposed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Additive Manufacturing Materials and Processes · Injection Molding Process and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. EOS, EOSINT P 800 manual.
2. Hopkinson · 2006
3. Effects of energy density on morphology and properties of selective laser sintered polycarbonate10.1016/S0924-0136(99)00007-2 ↗
4. Effects on the density distribution of SLS-parts10.1016/j.phpro.2012.10.066 ↗
5. Development of a characterization approach for the sintering behavior of new thermoplastics for selective laser sintering10.1016/j.phpro.2010.08.081 ↗
6. Dependence of mechanical properties of polyamide components on build parameters in the SLS process10.1016/j.jmatprotec.2006.09.007 ↗
7. Experimental analysis of selective laser sintering of polyamide powders: an energy perspective10.1016/j.jclepro.2010.07.018 ↗
8. Characterization of laser energy consumption in sintering of polymer based powders10.1016/j.jmatprotec.2011.12.003 ↗
9. Methods for quantifying the stable sintering region in laser sintered polyamide-1210.1002/pen.23386 ↗
10. Processability of PEEK, a new polymer for high temperature laser sintering (HT-LS)10.1016/j.eurpolymj.2015.04.003 ↗
11. Selective laser sintering of PEEK10.1016/j.cirp.2007.05.097 ↗
12. Scaffold development using selective laser sintering of polyetheretherketone–hydroxyapatite biocomposite blends10.1016/S0142-9612(03)00131-5 ↗
13. Additive processing of polymers10.1002/mame.200800121 ↗
14. Laser sintering of polyamides and other polymers10.1016/j.pmatsci.2011.04.001 ↗
15. Consolidation phenomena in laser and powder-bed based layered manufacturing10.1016/j.cirp.2007.10.004 ↗
16. Lasers and materials in selective laser sintering10.1108/01445150310698652 ↗
17. Binding mechanisms in selective laser sintering and selective laser melting10.1108/13552540510573365 ↗
18. Vasquez · 2012
19. The effect of process conditions on mechanical properties of laser-sintered nylon10.1108/13552541111184143 ↗
20. Characterization and thermal degradation of polyimide and polyamide liquid crystalline polymers10.1016/S0141-3910(99)00138-X ↗
21. Margolis · 1985
22. EOS
23. Victrex
24. Victrex, PEEK 450 PF datasheet.
25. Leuterer · 2012
26. Berretta · 2015
27. EOS. PA 2200 material datasheet.
28. EOS, EOSINT P 100 manual.
29. MettlerToledo, STARe software manual.
30. Bailey · 1997
31. Victrex, PEEK 450 G Datasheet.
32. Flowability of powders for selective laser sintering (SLS) investigated by round robin test
33. PEEK biomaterials in trauma, orthopedic, and spinal implants10.1016/j.biomaterials.2007.07.013 ↗
34. Use of first and second derivatives to accurately determine key parameters of DSC thermographs in lipid crystallization studies10.1016/j.tca.2005.09.013 ↗
35. Gabbott · 2008
36. On crystallization phenomena in PEEK10.1016/0032-3861(88)90386-2 ↗
37. Time-resolved X-ray study of poly(aryl ether ether ketone) crystallization and melting behaviour: 1. Crystallization10.1016/0032-3861(93)90658-W ↗
38. Time-resolved X-ray study of poly(aryl ether ether ketone) crystallization and melting behaviour: 2. Melting10.1016/0032-3861(93)90659-X ↗
39. Unusual crystalline morphology of poly aryl ether ketones (PAEKs)10.1039/C5RA17110E ↗
40. Fabrication and characterization of three-dimensional poly (ether-ether-ketone)/hydroxyapatite biocomposite scaffolds using laser sintering10.1243/095441105X9345 ↗
41. Sichina
42. Mechanism of thermal decomposition of poly(ether ether ketone) (PEEK) from a review of decomposition studies10.1016/j.polymdegradstab.2010.01.024 ↗
43. Thermal degradation of poly(aryl-ether-ether-ketone): experimental evaluation of crosslinking reactions10.1002/app.1990.070400917 ↗
44. InvibioBiomaterialSolutions