journal article·2019-02Open access

A novel optimization design method of additive manufacturing oriented porous structures and experimental validation

Jiaqi Zhao, Ming Zhang, Yu Zhu, Xin Li, Leijie Wang, Jinchun Hu

Materials & Design· Volume 163

Abstract

The development and application of inhomogeneous porous structures have greatly benefitted from the emergence of additive manufacturing (AM) techniques. At the same time, the inherent constraints of AM techniques have highlighted the importance of design for AM. In this paper, a novel method is proposed to optimize the design of AM oriented porous structures and improve their structural performance. In particular, this method optimizes porous structures using embedded voids and incorporates two novel filters, one of which satisfies the minimum feature size constraint while the other facilitates a support-free manufacturing process. The performance of the method was validated via numerical analyses and experiments, the results of which confirmed the excellent stiffness properties and adaptability to the AM constraints of the designed porous structure.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Topology Optimization in Engineering · Cellular and Composite Structures · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. Gibson · 1997 · 1997
2. Mechanical metamaterials: smaller and stronger10.1038/nmat4591 ↗
3. The design process of additive manufactured meso-scale lattice structures: a review10.1115/1.4040131 ↗
4. Manufacture, characterisation and application of cellular metals and metal foams10.1016/S0079-6425(00)00002-5 ↗
5. Fabrication methods of porous metals for use in orthopaedic applications10.1016/j.biomaterials.2005.12.002 ↗
6. Gibson · 2010
7. Gibson · 2015
8. Bridging topology optimization and additive manufacturing10.1007/s00158-015-1274-4 ↗
9. Topology optimization for additive manufacturing
10. Design for manufacture and design for “X”: concepts, applications, and perspectives10.1016/S0360-8352(01)00045-6 ↗
11. Design and analysis of lattice structures for additive manufacturing10.1115/1.4033957 ↗
12. Design and analysis of strut-based lattice structures for vibration isolation10.1016/j.precisioneng.2017.09.010 ↗
13. Design of materials using topology optimization and energy-based homogenization approach in Matlab10.1007/s00158-015-1294-0 ↗
14. Experimental-assisted design development for an octahedral cellular structure using additive manufacturing10.1108/RPJ-12-2014-0178 ↗
15. Topological derivative for multi-scale linear elasticity models applied to the synthesis of microstructures10.1002/nme.2922 ↗
16. An improved lattice structure design optimization framework considering additive manufacturing constraints10.1108/RPJ-10-2015-0139 ↗
17. Automatic design of optimal structures
18. Optimization of lattice structures for additive manufacturing technologies10.1007/978-3-319-45781-9_22 ↗
19. Design of truss-like cellular structures using relative density mapping method10.1016/j.matdes.2015.06.180 ↗
20. Design of truss-like cellular structures using relative density mapping method
21. A novel design method for nonuniform lattice structures based on topology optimization10.1115/1.4040546 ↗
22. Efficient design-optimization of variable-density hexagonal cellular structure by additive manufacturing: theory and validation10.1115/1.4028724 ↗
23. Multiphase topology optimization of lattice injection molds10.1016/j.compstruc.2017.07.007 ↗
24. Efficient design optimization of variable-density cellular structures for additive manufacturing: theory and experimental validation10.1108/RPJ-04-2016-0069 ↗
25. Natural frequency optimization of variable-density additively manufactured lattice structure: theory and experimental validation10.1115/1.4040622 ↗
26. Coupling lattice structure topology optimization with design-dependent feature evolution for additive manufactured heat conduction design10.1016/j.cma.2017.12.024 ↗
27. Integrated design of cellular composites using a level-set topology optimization method10.1016/j.cma.2016.06.012 ↗
28. Design of graded lattice structure with optimized mesostructures for additive manufacturing
29. Design for Additive Manufacturing: trends, opportunities, considerations, and constraints10.1016/j.cirp.2016.05.004 ↗
30. A survey of manufacturing oriented topology optimization methods10.1016/j.advengsoft.2016.07.017 ↗
31. An identification method for enclosed voids restriction in manufacturability design for additive manufacturing structures10.1007/s11465-015-0340-3 ↗
32. Design for additive manufacturing of cellular structures10.3722/cadaps.2008.686-696 ↗
33. An additive manufacturing filter for topology optimization of print-ready designs10.1007/s00158-016-1522-2 ↗
34. Self-supporting structure design in additive manufacturing through explicit topology optimization10.1016/j.cma.2017.05.003 ↗
35. Support structure constrained topology optimization for additive manufacturing10.1016/j.cad.2016.08.006 ↗
36. Topology optimization considering overhang constraints: eliminating sacrificial support material in additive manufacturing through design10.1007/s00158-016-1551-x ↗
37. Optimal topology for additive manufacture: a method for enabling additive manufacture of support-free optimal structures10.1016/j.matdes.2014.06.015 ↗
38. Combined optimization of part topology, support structure layout and build orientation for additive manufacturing10.1007/s00158-017-1877-z ↗
39. Continuous front propagation-based overhang control for topology optimization with additive manufacturing10.1007/s00158-017-1880-4 ↗
40. Asymptotic analysis for periodic structures
41. A review of homogenization and topology optimization I - homogenization theory for media with periodic structure10.1016/S0045-7949(98)00131-X ↗
42. Effective properties of composite materials with periodic microstructure: a computational approach10.1016/S0045-7825(98)00227-8 ↗
43. Asymptotic homogenization of composite materials and structures10.1115/1.3090830 ↗
44. Bendsøe · 2003
45. Topology optimization approaches: a comparative review10.1007/s00158-013-0978-6 ↗
46. A voxel-based method of constructing and skinning conformal and functionally graded lattice structures suitable for additive manufacturing10.1016/j.addma.2016.10.006 ↗
47. Material interpolation schemes in topology optimization10.1007/s004190050248 ↗
48. Topology optimization of coated structures and material interface problems10.1016/j.cma.2015.02.011 ↗
49. Volume preserving nonlinear density filter based on heaviside functions10.1007/s00158-009-0452-7 ↗
50. Benchmarking optimization solvers for structural topology optimization10.1007/s00158-015-1250-z ↗
51. The development of design rules for selective laser melting
52. Numerical instabilities in topology optimization: a survey on procedures dealing with checkerboards, mesh-dependencies and local minima
53. The method of moving asymptotes? A new method for structural optimization10.1002/nme.1620240207 ↗
54. Efficient topology optimization in MATLAB using 88 lines of code10.1007/s00158-010-0594-7 ↗
55. Topology optimization of continuum structures under buckling constraints10.1016/j.compstruc.2015.05.020 ↗
56. Ferrari · 2018