Element diffusion model of bimetallic hot deformation in metallurgical bonding process
Source abstract
Abstract
Abstract The effect of process parameters on the diffusion behavior of different elements in the metallurgical bonding process of bimetallic hot deformation is investigated. The diffusion distance of different elements increases with the effective strain, deformation and holding temperatures, deformation and holding times. On the other hand, it decreases with the increase of effective strain rate. In addition, an element diffusion model considering the influences of different processing parameters on element diffusion behavior is proposed to predict element concentration values near the metallurgical bonding interface. The proposed element diffusion model is based on the Fick's second law for unidirectional flow under non-steady state condition and is applied to the finite element simulation to investigate the diffusion behavior of different elements in metallurgical bonding process. The study shows that the modified model can predict the concentration profile and diffusion distance in the transition zone with a higher accuracy compared with the reference element diffusion model without considering the effects of effective strain and strain rate.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Metal Alloys Wear and Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Material-based design of the extrusion of bimetallic tubes10.1016/j.commatsci.2014.07.021 ↗
2. Microstructure and mechanical properties of carbon steel A210/superalloy Sanicro 28 bimetallic tubes10.1016/S0921-5093(02)00686-X ↗
3. Laminates based on an iron aluminide intermetallic alloy and a CrMo steel10.1016/j.intermet.2004.12.017 ↗
4. Influence of heat treatment on interface of Cu/Al bimetal composite fabricated by cold rolling10.1016/j.compositesb.2011.04.045 ↗
5. Prediction of the local deformation mechanisms in metastable austenitic steels from the local concentration of the main alloying elements10.1016/j.matlet.2015.06.087 ↗
6. Stacking fault energy of iron-base shape memory alloys10.1016/S0167-577X(98)00172-4 ↗
7. First-principles investigation of the effect of carbon on the stacking fault energy of Fe–C alloys10.1016/j.actamat.2011.01.044 ↗
8. Investigation on elements inter-diffusion in reaction layer during hip between corrosion-resistant alloy and carbon steel
9. Microstructure and mechanical properties of diffusion bonded SiC/steel joint using W/Ni interlayer10.1016/j.matdes.2009.09.049 ↗
10. Characterization of the diffusion bonding behavior of pure Ti and Ni with different surface roughness during hot pressing10.1016/j.matdes.2014.09.071 ↗
11. Intermetallic formation and interdiffusion in diffusion couples made of uranium and single crystal iron10.1016/j.jnucmat.2015.05.026 ↗
12. Sluggish diffusion in Co–Cr–Fe–Mn–Ni high-entropy alloys10.1016/j.actamat.2013.04.058 ↗
13. Atomistic investigation of the effects of temperature and surface roughness on diffusion bonding between Cu and Al10.1016/j.actamat.2006.12.040 ↗
14. Effect of phase transformation and intermetallic compounds on microstructure and tensile strength properties of diffusion-bonded joints between Ti–6Al–4V and AISI 304L10.1016/j.matdes.2011.12.024 ↗
15. Diffusion bonding of AISI 304L steel to low-carbon steel with AISI 304L steel interlayer10.1016/j.matdes.2011.05.012 ↗
16. Inter-diffusion behavior of Ni/Fe/Ni laminated composite for magnetic and electromagnetic interference shielding10.1016/j.vacuum.2015.05.034 ↗
17. Finite difference solution of the diffusion equation and calculation of the interdiffusion coefficient using the Sauer–Freise and Hall methods in binary systems10.1016/j.proeng.2015.05.034 ↗
18. The numerical analysis of element concentration distribution near the diffusion bonding joint area
19. Strain function analysis method for void closure in the forging process of the large-sized steel ingot10.1016/j.commatsci.2011.07.011 ↗
20. A criterion for void closure in the porous model during the forging of steel ingot and its application10.1016/j.commatsci.2014.04.056 ↗
21. Internal void closure during the forging of large cast ingots using a simulation approach10.1016/j.jmatprotec.2011.01.017 ↗
22. A criterion for void closure in large ingots during hot forging10.1016/j.jmatprotec.2008.04.051 ↗
23. Numerical simulation and experimental verification of void evolution inside large forgings during hot working10.1016/j.ijplas.2013.02.017 ↗
24. Effects of temperature and strain rate on microstructure and mechanical properties of high chromium cast iron/low carbon steel bimetal prepared by hot diffusion-compression bonding10.1016/j.matdes.2014.06.067 ↗
25. Diffusion bonding of 9Cr ODS ferritic/martensitic steel with a phase transformation10.1016/j.fusengdes.2013.12.023 ↗
26. Hot pressing diffusion bonding of a titanium alloy to a stainless steel with an aluminum alloy interlayer10.1016/j.msea.2007.08.076 ↗
27. Diffusion bonding titanium to stainless steel using Nb/Cu/Ni multi-interlayer10.1016/j.matchar.2012.03.016 ↗
28. Evaluation of interface microstructure and mechanical properties of the diffusion bonded joints of Ti-6Al-4V alloy to micro-duplex stainless steel10.1016/j.msea.2011.02.050 ↗
29. An investigation on bonding mechanism and mechanical properties of Al/Ti compound materials prepared by insert moulding10.1016/j.matdes.2014.05.050 ↗
30. Interfacial reactions and strength properties in dissimilar titanium alloy/Ni alloy/microduplex stainless steel diffusion bonded joints10.1016/j.msea.2012.09.069 ↗
31. Diffusion bonding of titanium alloy to micro-duplex stainless steel using a nickel alloy interlayer: interface microstructure and strength properties10.1016/j.matdes.2012.02.058 ↗
32. Effects of deformation parameters on microstructure and mechanical properties of magnesium alloy AZ31B10.1016/S1001-0521(08)60062-5 ↗
33. Misiolek · 2006 · 1
34. Mechanisms of interdiffusion in Pd–Cu thin film diffusion couples10.1016/j.tsf.2009.08.026 ↗
35. Concentration characteristics of diffusion-induced recrystallization in Cu/CuAu multilayers of varying lattice mismatch10.1016/j.scriptamat.2009.10.012 ↗
36. Diffusion-induced recrystallization in nickel/palladium multilayers10.1016/j.actamat.2010.11.040 ↗
37. On the mechanism of diffusion-induced recrystallization: comparison between experiment and molecular dynamics simulations10.1016/j.actamat.2012.03.009 ↗
38. Extracting interdiffusion coefficients from binary diffusion couples using traditional methods and a forward-simulation method10.1016/j.intermet.2012.11.012 ↗
39. Influence of interface microstructure on the mechanical properties of titanium/17-4 PH stainless steel solid state diffusion bonded joints10.1016/j.matdes.2011.10.041 ↗
40. Element diffusion near the interface of diffusion bonding for Fe3Al and stainless steel 18-810.1007/s40195-016-0371-8 ↗