journal article·2019-07Open access

Temperature and microstructure dependence of localized tensile deformation of superelastic NiTi wires

Yuchen Chen, Ondřej Tyc, Lukáš Kadeřávek, Orsolya Molnárová, Luděk Heller, Petr Šittner

Materials & Design· Volume 174

Abstract

Superelastic NiTi wires possessing wide range of microstructures were deformed in tensile tests up to the end of the stress plateau in a wide temperature range −20 – 200 °C, unloaded and stress free heated to ~200 °C. The recoverability of upper plateau strains was evaluated in dependence on the test temperature and wire microstructure. At low temperatures below 20 °C, the upper plateau strains are fully recoverable upon unloading and heating. With increasing test temperature, however, the recoverability of upper plateau strains becomes gradually lost. Unusually long upper plateaus (10–17%) were observed at test temperatures, at which the upper plateau stress approached the yield stress for plastic deformation of martensite. The volume fraction of the martensite phase at the end of the stress plateau (evaluated by in-situ electric resistance and synchrotron x-ray diffraction) decreases with increasing test temperature in the range where the long plateaus were observed. TEM analysis revealed high density of {114} austenite twins in wires deformed in this temperature range. These observations are rationalized by gradual increase of the activity of the stress-induced B2 → B19′ → B2T martensitic transformation into twinned austenite and plastic deformation by dislocation slip with increasing test temperature.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Shape Memory Alloy Transformations · Ferroelectric and Piezoelectric Materials · Magnetic and transport properties of perovskites and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. An overview of nitinol medical applications10.1016/S0921-5093(99)00294-4 ↗
2. Dependence of processing window and microstructural evolution on initial material state in direct electric resistance heat treatment of NiTi alloy10.1016/j.matdes.2017.11.044 ↗
3. Transmission electron microscopy investigation of dislocation slip during superelastic cycling of Ni–Ti wires10.1016/j.ijplas.2010.05.005 ↗
4. On the plastic deformation accompanying cyclic martensitic transformation in thermomechanically loaded NiTi10.1016/j.ijplas.2018.07.007 ↗
5. Microstructure changes during non-conventional heat treatment of thin Ni–Ti wires by pulsed electric current studied by transmission electron microscopy10.1016/j.actamat.2010.04.046 ↗
6. Pseudoelastic cycling and ageing effects at ambient temperature in nanocrystalline Ni-rich NiTi wire10.1016/j.msea.2007.04.124 ↗
7. Tensile deformation of superelastic NiTi wires in wide temperature and microstructure ranges10.1007/s40830-018-00205-2 ↗
8. Structural and functional fatigue of NiTi shape memory alloys10.1016/j.msea.2003.10.327 ↗
9. Instability of cyclic superelastic deformation of NiTi investigated by synchrotron X-ray diffraction10.1016/j.actamat.2015.04.039 ↗
10. On the coupling between martensitic transformation and plasticity in NiTi: experiments and continuum based modelling10.1016/j.pmatsci.2018.07.003 ↗
11. Beyond the strain recoverability of martensitic transformation in NiTi10.1016/j.ijplas.2019.01.007 ↗
12. Deformation, twinning and thermo-mechanical strengthening of Ti50Ni47Fe310.1016/0956-7151(90)90272-I ↗
13. Ni-Ti based shape memory alloys
14. Transformation behaviour and unusual twinning in a NiTi shape memory alloy ausformed using equal channel angular extrusion10.1080/14786430412331331961 ↗
15. Mechanical twinning in Ti50Ni47Fe3 and Ti49Ni51 alloys10.1016/0001-6160(85)90167-1 ↗
16. Mechanism of deformation and crystal lattice reorientation in strain localization bands and deformation twins of the B2 phase of titanium nickelide10.1016/j.actamat.2004.01.001 ↗
17. Multiple plastic deformation mechanisms of NiTi shape memory alloy based on local canning compression at various temperatures10.1016/j.intermet.2015.12.003 ↗
18. Microstructure evolution and deformation mechanism of NiTiFe shape memory alloy based on plane strain compression and subsequent annealing10.1016/j.matchemphys.2018.05.031 ↗
19. New deformation twinning mode of B19’ martensite in Ti-Ni shape memory alloy10.1016/S1359-6462(98)00366-2 ↗
20. Direct evidence of correlation between {2 0 1̄}B19′ and {1 1 4}B2 deformation twins in Ti–Ni shape memory alloy10.1016/S1359-6462(03)00356-7 ↗
21. Stress-induced martensitic transformations in [001] crystals of titanium nickelide and its relation to mechanical twinning in the В2-phase10.1007/s11182-009-9271-y ↗
22. An origin of functional fatigue of shape memory alloys10.1016/j.actamat.2017.01.001 ↗
23. In situ investigation of the fast microstructure evolution during electropulse treatment of cold drawn NiTi wires10.1016/j.actamat.2010.11.018 ↗
24. Elastic energy minimization and the recoverable strains of polycrystalline shape-memory materials10.1007/s002050050049 ↗
25. Initiation and propagation of localized deformation in elasto-plastic strips under uniaxial tension10.1016/S0749-6419(97)00062-4 ↗
26. Grain-resolved analysis of localized deformation in nickel-titanium wire under tensile load10.1126/science.aad6700 ↗
27. Electric resistance variation of NiTi shape memory alloy wires in thermomechanical tests: experiments and simulation10.1016/j.msea.2007.02.162 ↗
28. In situ observation on temperature dependence of martensitic transformation and plastic deformation in superelastic NiTi shape memory alloy10.1016/j.matdes.2017.08.037 ↗
29. 1885 · vol. 1 · 575
30. Propagation of phase transformation fronts in pseudoelastic NiTi tubes under uniaxial tension10.1016/j.eml.2017.06.006 ↗
31. Tension, compression, and bending of superelastic shape memory alloy tubes10.1016/j.jmps.2012.12.012 ↗
32. Investigation of the stress-induced martensitic transformation in pseudoelastic NiTi under uniaxial tension, compression and compression-shear10.1016/j.msea.2014.10.054 ↗
33. Temperature dependence of Luders strain and its correlation with martensitic transformation in a medium Mn transformation induced plasticity steel10.1016/S1006-706X(17)30156-5 ↗
34. Higher order twin modes in martensitic NiTi—the (20-1) case10.1016/j.msea.2012.08.022 ↗
35. Energetics of twinning in martensitic NiTi10.1016/j.actamat.2011.05.063 ↗
36. Bhattacharya · 2003
37. Controlling grain boundary character distribution of high-temperature B2 phase in TiNiFe alloy10.1016/j.intermet.2012.06.009 ↗
38. A one-dimensional model for shape memory alloys10.1016/0020-7683(94)90208-9 ↗
39. Deformation twinning10.1016/0079-6425(94)00007-7 ↗
40. Micromechanical quantification of elastic, twinning, and slip strain partitioning exhibited by polycrystalline, monoclinic nickel–titanium during large uniaxial deformations measured via in-situ neutron diffraction10.1016/j.jmps.2013.05.008 ↗
41. Effect of different stages of deformation on the microstructure evolution of Ti-rich NiTi shape memory alloy10.1016/j.matchar.2017.01.024 ↗
42. Deformation twinning in difficult-to-work alloys during severe plastic deformation10.1016/j.msea.2005.08.021 ↗
43. Austenite grain refinement during load-biased thermal cycling of a Ni49.9Ti50.1 shape memory alloy10.1016/j.actamat.2015.03.017 ↗
44. Thermomechanical cycling of a NiTi shape memory alloy-macroscopic response and microstructural evolution10.1016/j.ijplas.2014.01.006 ↗
45. Self-organized multigrain patterning with special grain boundaries produced by phase transformation cycling
46. Group theory description of transformation pathway degeneracy in structural phase transformations10.1016/j.actamat.2016.01.027 ↗
47. A universal symmetry criterion for the design of high performance ferroic materials10.1016/j.actamat.2017.01.037 ↗
48. Crystal symmetry and the reversibility of martensitic transformations10.1038/nature02378 ↗
49. A.N. Bucsek, L. Casalena, L., D.C. Pagan, P.P. Paul, Y. Chumlyakov, M.J. Mills, A.P. Stebner, A.P., Three-dimensional in situ characterization of phase transformation induced austenite grain refinement in nickel-titanium. Scr. Mater., 162 (2019) 361–366. doi:https://doi.org/10.1016/j.scriptamat.2018.11.043.10.1016/j.scriptamat.2018.11.043 ↗
50. Micromechanics of plastic deformation and phase transformation in a three-phaseTRIP-assisted advanced high strength steel: experiments and modeling10.1016/j.jmps.2015.01.014 ↗